Radiation degradation of copolymers of methyl methacrylate and 3-oximino-2-butanone methacrylate

Copolymers of methyl methacrylate and 3-oximino-2-butanone methacrylate (OM) were investigated as deep-UV and e-beam resists. Their increased sensitivity relative to PMMA (up to 50 times) was correlated with the radiation chemical yields of the volatile products and main chain scissions. The degradation of these copolymers, activated by the 3-oximino-2-butanone entity, is discussed in terms of energy absorption mechanisms and the subsequent scission reactions.     

Synthesis, band structure, and optical properties of Ba2ZnV2O8

A novel compound Ba₂ZnV₂O₈ has been synthesized in high temperature solution reaction and its crystal structure has been characterized by means of single crystal X-ray diffraction analysis. It crystallizes in monoclinic system and belongs to space group P2₁/c with a=7.9050(16), b=16.149(3), , β=90.49(3). It builds up from 1-D branchy chains of [ZnV₂O₈⁴⁻]_∞, and the Ba²⁺ cations are located in the space among these chains. The IR spectrum, ultraviolet-visible diffuse reflection integral spectrum and fluorescent spectra of this compound have been investigated. The calculated results of energy band structure by the density functional theory method show that the solid-state compound of Ba₂ZnV₂O₈ is an insulator with direct band gap of 3.48 eV. The calculated total and partial density of states indicate that the top valence bands are contributions from the mixings of O-2p, V-3d, and Zn-3d states and low conduction bands mostly originate from unoccupied antibonding states between the V-3d and O-2p states. The V-O bonds are mostly covalence characters and Zn-O bonds are mostly ionic interactions, and the ionic interaction strength is stronger between the Ba-O than between the Zn-O. The refractive index of n_x, n_y, and n_z is estimated to be 1.7453, 1.7469, and 1.7126, respectively, at wavelength of 1060 nm for Ba₂ZnV₂O₈ crystal.     

Polymerization and copolymerization of methacrylic esters derived from glycidyl methacrylate

Copolymerization of methacrylic esters derived from glycidyl methacrylate and nucleophiles with styrene was carried out. The monomer reactivity ratios of these methacrylic esters were varied with the alkoxy groups of the esters and the solvent used.     

Studies on antimony oxides: Part I

Thermogravimetry (TG), differential thermal analysis (DTA) and X-ray diffraction studies of antimony(III) oxide, (Sb₂O₃), in air, nitrogen and argon atmospheres have been made. In air Sb₂O₃ becomes oxidized to Sb₂O₄ above 510°. The oxidation reaction proceeds in two stages as revealed by the TG and DTA curves. The behaviour of Sb₂O₃ is similar in both N₂ and Ar. Sb₂O₃ remains unaffected up to 430°, above which there is a slow, and continuous mass loss up to 550°. Above 550° Sb₂O₃ volatilizes resulting in an enormous weight loss. X-ray studies of the sublimate and the residue indicate the former to be the cubic form of Sb₂O₃ (Senarmontite) while the residue is the orthorhombic (Valentinite) structure. From the DTA curves in air, N₂ and Ar, the transition temperature for the cubic to the orthorhombic modification has been estimated to be around 610°.     

Chloryl nitrate: a novel product of the OClO + NO3 + M recombination

The products of the reaction of OClO with NO3 were investigated between 220 and 298 K using a flow reactor and infrared, visible, and ultraviolet analysis. At temperatures below 250 K new infrared and ultraviolet absorption features were observed and assigned to the novel compound chloryl nitrate (O2ClONO2). Additionally, ClO and NO2 were observed as reaction products, indicating the existence of a second reaction channel. O2ClONO2 formation predominates at temperatures below 230 K. The reaction rate constant at 220 K is estimated to be on the order of 10(-14) cm3 molecule-1 s-1 in 1-5 Torr of helium. These observations suggest that O2ClONO2 may exist in the terrestrial stratosphere.     

Optimization of simulated moving bed plants with low efficient stationary phases: separation of fructose and glucose

An optimization procedure for simulated moving bed (SMB) plants with low efficient stationary phases is presented. The new aspect is that the desorbent consumption can be cut by 70% by running the plant with lower internal liquid flows and a corresponding larger switch time while the productivity is kept constant. This concept was validated by the separation of fructose and glucose in water on a calcium resin with an eight-column SMB plant. The separation can be predicted well by a true moving bed (TMB) and a simulated moving bed simulation. Adsorption isotherms were determined up to 300 kg/m3 for glucose and 500 kg/m3 for fructose from 25 to 80 degrees C. Experimental SMB runs were performed over a wide range of feed concentrations (10-350 kg/m3) and temperatures (25-80 degrees C). The strong influence of the delay volume is pointed out. For an experimental run with high feed concentration a complete set of data is presented. To reduce biological growth separation at 80 degrees C is recommended.     

An application of activation analysis of aluminum in biological materials

The behavior of aluminum compounds in animals was made clear by using non-destructive neutron activation analysis instead of radiotracer method. Basic aluminum sucrose sulfate (BASS) and dried aluminum hydroxide gel (DAHG) were orally administered to rats. The residual BASS and DAHG on gastric walls of rats were determined by neutron activation analysis. It was obtained the following results that BASS was found at the longer time in the stomach. For reason, it is seemed that BASS is hydrolyzed in gastric juice. And it could not find the aluminum in liver, kidney and spleen.     

Chemical studies on nitrogen heterocyclic skeleton of the Daphniphyllum alkaloids

From a biogenetic point of view, a great variety of related alkaloids isolated from the plant Daphniphyllaceae are related to one another by bond formation or fission. Thus, daphnialcohol acetate (6), a derivative of the degradation products of daphniphylline (1), was subjected to von Braun degradation followed by acid-catalyzed recyclization to give an isomer (8) of daphnialcohol, which has a new type of nitrogen heterocyclic skeleton. Furthermore, daphnilactone-B (3) was converted into a daphniphylline-type compound (19) via a plausible intermediate (21).     

Polymers for DNA delivery

Nucleic acid delivery has many applications in basic science, biotechnology, agriculture, and medicine. One of the main applications is DNA or RNA delivery for gene therapy purposes. Gene therapy, an approach for treatment or prevention of diseases associated with defective gene expression, involves the insertion of a therapeutic gene into cells, followed by expression and production of the required proteins. This approach enables replacement of damaged genes or expression inhibition of undesired genes. Following two decades of research, there are two major methods for delivery of genes. The first method, considered the dominant approach, utilizes viral vectors and is generally an efficient tool of transfection. Attempts, however, to resolve drawbacks related with viral vectors (e.g., high risk of mutagenicity, immunogenicity, low production yield, limited gene size, etc.), led to the development of an alternative method, which makes use of non-viral vectors. This review describes non-viral gene delivery vectors, termed "self-assembled" systems, and are based on cationic molecules, which form spontaneous complexes with negatively charged nucleic acids. It introduces the most important cationic polymers used for gene delivery. A transition from in vitro to in vivo gene delivery is also presented, with an emphasis on the obstacles to achieve successful transfection in vivo.     

Protonation et hydrolyse d'enamine. Epimerisation des immoniums intermediaires

At pH 5 (AcOHAcONa) protonation of the enamine of 3,6,6-trimethylnorpinane 2-one (3-methylnopinone) yields the cis immonium ion 6 (X  OAc), which isomerizes to the thermodynamically more stable trans immonium ion 6′ (X  OAc). Under more strongly acid conditions (aqueous hydrochloric or perchloric acids), the enamonium salts 7 (X  Cl or ClO₄) are formed; these isomerize, with a rate increasing with decreasing acidity to the cis immonium salts 6, stable under these conditions. Epimerization of the cis salt 6 (X  Cl), occurs in ethereal hydrogen chloride, the rate increasing also with decreasing acidity. At pH 5, hydrolysis of the enamine yields 3-methylnopinone, the proportion of the less thermodynamically stable trans isomer increasing with a rise in reaction temperature.