ESI‐QTof‐MS characterization of hirsutinolide and glaucolide sesquiterpene lactones: Fragmentation mechanisms and differentiation based on Na+/H+ adducts interactions in complex mixture

Sesquiterpene lactones (SL) have been reported with various biological effects. Among the described SL skeletons, hirsutinolide and glaucolide have not been extensively studied by mass spectrometry (MS), especially how to distinguish them in organic matrices. Thus, this paper reports (1) a strategy of their differentiation based on MS behavior during the ionization and (2) a proposal of the fragmentation pattern for both SL‐subtypes. ESI(+)‐HRMS data of four isolated SL (hirsutinolides 1 and 3 ; glaucolides 2 and 4 ) were recorded by direct and UPLC water‐sample combined injections. These analyses revealed that hirsutinolides and glaucolides formed [M+Na]⁺ ion during the operation of the direct MS injection, and ([M+Na]⁺ and [M+H‐H₂O]⁺) and [M+H]⁺ ions were respectively observed for hirsutinolides and glaucolides during the operation of combined UPLC water and sample MS injection. Computational simulations showed that the complex hirsutinolide ( 1 )‐Na⁺ formed with a lower preparation energy compared with the complex glaucolide ( 2 )‐Na⁺. However, despite their different behavior during the ionization process, ESI(+)‐HRMS/MS analyses of 1 ‐ 4 gave similar fragmentation patterns at m/z 277, 259, 241, and 231 that can be used as diagnostic ions for both skeletons. Moreover, the differentiation strategy based on the nature of the complex SL‐adducts and their MS/MS fragmentation pattern were successfully applied for the chemical characterization of the extract from Vernonanthura tweedieana using UPLC‐ESI‐HRMS/MS. Among the characterized metabolites, SL with hirsutinolide and glaucolide skeletons showed the aforementioned diagnostic fragments and an ionization behavior that was similar to those observed during the water‐sample combined injection.     

Magnetic properties of Fe−Mn−Al alloy system in the FCC disordered phase

In this work we report the experimental studies of Fe?Mn?Al alloys in the FCC disordered phase at room temperature by Mössbauer spectroscopy and X-ray diffraction. In this phase the alloys are antiferromagnetic with a constant mean hyperfine field ( \(\bar H\) ) near 26 kOe in the composition range from 0 to 7.5 at.% Al and 50 to 65 at.% Fe. When the Al or Fe concentration increases, the \(\bar H\) value gradually decreases to zero and the alloy becomes paramagnetic. In the same way when the Al concentration increases the lattice parameter increases linearly but when the Fe concentration increases the lattice parameter remains nearly constant for alloys with 5 at.% Al and decreases for alloys with 10 at.% Al.     

Classical physics and Penrose's thesis

We expose and discussPenrose's thesis: Nature produces harnessable noncomputable processes, but none at the classical level. We then suggest a partial counterexample to it, based on aGedanken experiment about an undecidable family of integrable Hamiltonian systems that could lead to a sort of idealized solution to the Halting problem for Turing machines.1. Partially supported by a Fulbright/CNP_q-Brazil grant. Permanent address after November 5, 1990: Center for the Study of Mathematical Theories of Communication, IDEA/School of Communications, Federal University of Rio de Janeiro, Av. Pasteur 250, 22290 Rio de Janeiro, RJ Brazil.     

MPT versus: A manifestly covariant presentation of motion reversal and particle-antiparticle exchange

We show that particle-antiparticle exchange and covariant motion reversal are two physically different aspects of the same mathematical transformation, either in the prequantal relativistic equation of motion of a charged point particle, in the general scheme of second quantization, or in the spinning wave equations of Dirac and of Petiau-Duffin-Kemmer. While, classically, charge reversal and rest mass reversal are equivalent operations, in the wave mechanical case mass reversal must be supplemented by exchange of the two adjoint equations, implying .Denoting by M the rest mass reversal, P the parity reversal, T the Racah time reversal, and Z the exchange, the connection with the usual scheme of charge conjugation, parity reversal, and Wigner motion reversal, is with, of course,     

Online preconcentration system for determining ultratrace amounts of Cd in vegetal samples using thermospray flame furnace atomic absorption spectrometry

A system has been developed for online preconcentration and determination of Cd using thermospray flame furnace atomic absorption spectrometry (TS-FF-AAS). It is based on the solid-phase extraction of Cd in an Amberlite XAD-2 minicolumn loaded with 2-(2-thiazolylazo)-5-dimethylaminophenol (TAM), and the metal ion is eluted with 1 mol L⁻¹ hydrochloridric acid, followed by its determination. The online system allows determining Cd with a detection limit of 8.0 ng L⁻¹ and a quantification limit of 25.0 ng L⁻¹. The precision (repeatability), calculated as the relative standard deviation (% RSD) in sample solutions containing 0.5 and 3.0 μg L⁻¹ of Cd, was 6.1 and 4.5%, respectively. The preconcentration factor obtained was 24. The system’s accuracy was confirmed by analyzing the following certified reference materials (CRMs): Rice flour NIES 10b, Apple leaves NIST 1515 and Orchard leaves NBS 1571. This procedure was applied to the determination of Cd in cabbage and powdered guarana samples.     

Nitric oxide photorelease from ruthenium salen complexes in aqueous and organic solutions

The complexes [Ru(salen)(NO)Cl] and [Ru(salen)(NO)(H(2)O)](+) were shown to release the nitrosyl ligand as nitric oxide upon exposure to visible light in organic and aqueous solutions respectively, by means of UV-visible, EPR, and FTIR spectroscopies. The former was prepared by a new synthetic route and had its structure determined by single-crystal X-ray diffraction. A crystal of the dichloromethane solvate is orthorhombic, space group Fdd2 (No. 43) and formula C(16)H(14)ClN(3)O(3)Ru.CH(2)Cl(2), with Z = 16 and cell parameters a = 25.489(4), b = 33.435(4), and c = 9.3716(9) A. The electronic absorption spectra of the complexes were calculated using the INDO/S method. The water-soluble complex is a potential drug for antitumoral phototreatment.     

Optical and Electrical Properties of Polymerizing Plasmas and Their Correlation with DLC Film Properties

Diamond-like carbon (DLC) films were grown from radiofrequency plasmas of acetylene-argon mixtures, at different excitation powers, P. The effects of this parameter on the plasma potential, electron density, electron temperature, and plasma activity were investigated using a Langmuir probe. The mean electron temperature increased from about 0.5 to about 7.0 eV while the mean electron density decreased from about 1.2 × 10⁹ to about 0.2 × 10⁹ cm^–3 as P was increased from 25 to 150 W. Both the plasma potential and the plasma activity were found to increase with increasing P. Through actinometric optical emission spectrometry, the relative concentrations of CH, [CH], and H, [H], in the discharge were mapped as a function of the applied power. A rise in [H] and a fall in [CH] with increasing P were observed and are discussed in relation to the plasma characteristics and the subimplantation model. The optical properties of the films were calculated from ultraviolet-visible spectroscopic data; the surface resistivity was measured by the two-point probe method. The optical gap, E _G, and the surface resistivity, _s, fall with increasing P. E _G and _s are in the ranges of about 2.0–1.3 eV and 10¹⁴–10¹⁶ /, respectively. The plasma power also influences the film self-bias, V _b, via a linear dependence, and the effect of V _b on ion bombardment during growth is addressed together with variation in the relative densities of sp² and sp³ bonds in the films as determined by Raman spectroscopy.     

Factorial design in the optimization of preconcentration procedure for lead determination by FAAS

The present paper proposes a preconcentration procedure for lead determination using flame atomic absorption spectrometry (FAAS). It is based on lead(II) ions extraction as brilliant cresyl blue (BCB) complex and its sorption onto Diaion HP-2MG, a methacrylic ester copolymer. The optimization step was carried out using factorial design and the variables studied were pH, shaking time and reagent concentration. In the established experimental conditions, lead can be determinate with a limit of detection of 3.7 μg L⁻¹ lead (N = 20) and a relative standard deviation of 7% for a lead concentration of 100 μg L⁻¹. The accuracy was confirmed by analysis of a certified reference material, the stream sediment furnished by National Research Centre for Certified Reference Materials (NRCCRM), China (GBW 07310). Effect of other ions in the procedure proposed was also studied. The method was applied for lead determination in real samples of water, tea, soil and dust. Tests of addition/recovery in the experiments for lead determination in water samples revealed that the proposed procedure could be applied satisfactorily for analysis of these samples.