Synthesis of N—（4—Salicylideneiminoaryl）monoaza Crown Ethers and Dioxygen Affinities of Their Cobalt（Ⅱ）Complexes

The Schiff base‐containing pendant monoaza crown ether HL¹, HL², HL³ and HL⁴ have been synthesized by condensation of salicylaldehyde with N‐(4‐aminoaryl) monoaza crown ethers, which were prepared conveniently from 4‐nitro‐N, N‐di(hydroxyethyl) aniline or 4‐nitrobenzyl chloride via cyclization or condensation and reduction. The structures of HL¹—HL⁴ were verified by ¹H NMR, IR spectra, MS and elemental analysis. Moreover, the oxygenation constants (KO2) and thermodynamic parameters (δH⁰ and δS⁰) of their cobalt(II) complexes were determined in the range of ?5 °C to 25 °C, and the effect of crown ring bonded to a Schiff base on the dioxygen affinities of cobalt(II) complexes was also observed as compared to the uncrowned analogue (CoL).     

2-位碲桥联环糊精的制备、表征及其谷胱甘肽过氧化物酶活性的研究

该文以三种母体环糊精(CD),即α-、β-和γ-CD为修饰模板,将功能性基团有机碲引入到环糊精次面的2位羟基上,制备得到了三种具有谷胱甘肽过氧化物酶(GPX)活性的GPX模拟物。采用元素分析、红外光谱、核磁共振等手段对三种环糊精衍生物的结构进行了表征。运用GPX经典双酶体系法测定了三种环糊精衍生物的GPX活性,实验结果表明三者均具有很高的催化活性,其中2-位碲桥联γ-环糊精(2-Te-γ-CD)具有最高的GPX活性,其催化谷胱甘肽(GSH)还原过氧化氢(H2O2),叔丁基过氧化氢(t-BuOOH)和枯烯过氧化氢(CuOOH)的活力分别是传统"小分子硒酶"Ebselen的80.5,333.3和118.3倍。     

ZnSe掺Cu与Zn空位缺陷的稳定性、电子结构与光学性质

采用基于密度泛函理论框架下的第一性原理平面波超软雁势方法, 对ZnSe闪锌矿结构本体、掺入p型杂质Cu(Zn_0.875Cu_0.125Se)及Zn空位(Zn_0.875Se)超晶胞进行结构优化处理. 计算并详细分析了缺陷体系的形成能和三种体系下ZnSe材料的态密度、能带结构、集居数、介电和吸收光谱. 结果表明: 在Zn空位与Cu掺杂ZnSe体系中, 由于空位及杂质能级的引入, 禁带宽度有所减小, 吸收光谱产生红移; 单空位缺陷结构不易形成, Zn_0.875Se结构不稳定, Cu掺杂ZnSe结构相对更稳定.     

Crucial factors affecting the physicochemical properties of sol–gel produced Fe3O4@SiO2–NH2 core–shell nanomaterials

Multifunctional nanomaterials with task-specific physicochemical properties, especially core?Cshell nanostructures with Fe₃O₄ core and NH₂-functional shells (Fe₃O₄@SiO₂?CNH₂), have been extensively investigated as high-performance adsorbents, catalysts and catalyst supports; and in most cases the controllable sol?Cgel technique is the choice for fabrication of this kind of widely applied materials. Herein, we demonstrated that mono-dispersed and spherical Fe₃O₄@SiO₂?CNH₂ nanomaterials with magnetic response core, NH₂-functional shell structure can be facilely prepared by co-condensation of TEOS with APTMS using a versatile sol?Cgel process. It was shown that the proper usage of APTMS and appropriate pre-hydrolysis time of TEOS were crucial and key steps for formation of highly uniform and desirable amino loading Fe₃O₄@SiO₂?CNH₂ materials. The TEOS pre-hydrolysis and the critical time (around 90?min) before the addition of APTMS prove to be vital for uniform structure evolution, while the appropriate concentration of APTMS (~2.28?mmol?L^?1 in our system) leads to well-dispersed materials with relatively high loading of amino functionality. The as-prepared Fe₃O₄@SiO₂?CNH₂ magnetic nanoparticles prepared under optimum conditions possessing superparamagnetic behavior, uniform core?Cshell structure (~200?nm in diameter), relatively large BET surface area (~138?m²/g) and high incorporation of amino-functionality (~2.90?wt?%).     

Fast synthesis of dopamine-coated Fe3O4 nanoparticles through ligand-exchange method

A fast approach was described for the synthesis of water-dispersible monodisperse dopamine-coated Fe₃O₄ nanoparticles（DA-Fe₃O₄） with uniform size and shape via ligand-exchange of oleic acid on Fe₃O₄ using only 2 min.The prepared DA-Fe₃O₄ nanoparticles were characterized by transmission electron microscopy,Fourier transform infrared spectrometry,and vibrating sample magnetometer.The results indicated that the resulting DA-Fe₃O₄ nanoparticles had an average diameter of about 19.2 nm. The magnetic saturation value of the prepared DA-Fe₃O₄ nanoparticles was determined to be 72.87 emu/g,which indicating a well-established superparamagnetic property.     

Electrochemical Immunosensor for α‐Fetoprotein Based on Gold Nanoparticles/Graphene‐Prussian Blue

The electrochemical immunosensor for α‐fetoprotein (AFP) was fabricated based on the platform of gold nanoparticles (GNP)/graphene (Gr)‐prussian blue (PB). By electrodeposition, GNP were modified on the surface of the prepared Gr‐PB. The anti‐AFP‐1,1′‐ferrocenedicarboxylic acid (FcDA) as label was directly immobilized on the platform of GNP/Gr‐PB. And after the immunoreactions, the formed complex inhibited the electron transfer and decreased the catalytic current of FcDA toward the reduction of H₂O₂. And in the range of 10–3200 pg·mL^?1, the decreased current is linear with the concentration of AFP, with a detection limit of 3 pg·mL^?1. The developed immunoassay method showed good precision, high sensitivity, acceptable stability and reproducibility, and could be used for the detection of real samples with consistent results in comparison with those obtained by the enzyme linked immunosorbent assay (ELISA) method.     

Diastereoselective Total Synthesis of (±)‐Schindilactone A,Part 2: Construction of the Fully Functionalized CDEFGH Ring System

The successful synthesis of the highly complex model compound ( 2 ) of the CEFGH ring system of schindilactone A ( 1 ) is described. Several synthetic methodologies were developed and applied to achieve this goal, including ring‐closing metathesis (RCM) and Co–thiourea‐catalyzed Pauson–Khand reactions. Furthermore, two independent approaches were developed for the construction of the GH ring of model compound 2 , the key steps of which included Pd–thiourea‐catalyzed carbonylative annulation, methylation, and sequential RCM/oxa‐Michael‐addition reactions. The chemistry developed herein has provided a greater understanding of the synthesis of schindilactone A ( 1 ) and its analogous compounds of the same family.     

Syntheses and Structures of Three Copper Coordination Polymers Based on Bis(triazol‐1‐ylmethyl)benzene

Three copper(II) coordination polymers [Cu(mbtz)₂(NCS)₂]_n ( 1 ), [Cu(mbtz)₂Cl₂]_n ( 2 ) and [Cu(mbtz)(btec)_0.5]_n ( 3 ) (mbtz=1,3‐bis(1,2,4‐triazol‐1‐ylmethyl)benzene, btec=1,2,4,5‐benzenetetracarboxylate) were synthesized. In 1 and 2 , two mbtz ligands are wrapped around each other and are held together by Cu(II) atoms to form one‐dimensional double chain. In 3 , each btec ligand connects four Cu(II) atoms through its four carboxylate groups, resulting in a planar two‐dimensional [Cu(btec)_0.5]_n network. The Cu(II) atoms are further coordinated mbtz ligands to fulfil their coordination geometry and construct new [Cu(btec)_0.5(mbtz)]_n network. 2 and 3 further form the three‐dimensional network through the π···π stacking interactions between the mbtz ligands. The thermal stabilities of 1 , 2 and 3 were measured.     

Influence of sterically non-hindering methyl groups on adsorption properties of two classical zinc and copper MOF types

The metal-organic frameworks (three-dimensional porous coordination polymers) [Zn₄O(Me₄BPDC)₃] × 9 DMF, 2 · 9 DMF and [Cu₂(Me₄BPDC)₂] × 9 DMF, 3 · 9 DMF are representatives of the classical Zn-IRMOF series and Cu paddle-wheel complexes with H₂Me₄BPDC = 2,2′,6,6′-tetramethyl-4,4′-biphenyldicarboxylic acid, 1. The dicarboxylate linker of 1 is a representative of the non-planar biphenyl ligand family, known as an efficient scaffold for chiral molecules. There is a 90° twist angle between the phenyl rings in 1, dictated by the methyl groups, which leads to assembly of doubly interpenetrated pcu-a (in 2) and nbo-a (in 3) nets under low temperature solvothermal conditions in dimethylformamide (DMF). Activation by degassing (to yield 2), exchange with methanol or tetrahydrofuran and subsequent evacuation at elevated temperatures (to yield 3^I) gave materials with BET surface areas of 1735 m²/g (2) and 1041 m²/g (3^I). Adsorbed quantities of H₂ were 1.26 wt% (2) and 1.02 wt% (3^I) (77 K, 1 bar), CO₂ 30.8 cm³/g (2) and 50 cm³/g (3^I) (273 K, 1 bar) and CH₄ 12.9 cm³/g (2) and 11.4 cm³/g (3^I) (273 K, 1 bar). The H₂ and CO₂ sorption values for 2 are similar to those of MOF-5 (IRMOF-1) with its almost doubled BET surface area. An increase is found concerning the adsorbed amounts of N₂, H₂, and CO₂ for 3^I compared to related doubly interpenetrated nbo-a-type MOF-601, MOF-602, MOF-603 ([Cu₂L₂] with L = 2,2′-R₂-4,4′-biphenyldicarboxylate, R = CN, Me, I, respectively).     

A novel approach for preparation of “cage-like” multihollow polymer microspheres through sulfonated polystyrene particles

A new and effective process has been developed for fabrication of novel cage-like multihollow polymer particles by using sulfonated polystyrene (SP) particles as the templates, with heptane as the phase separation agent, in an ethanol/water medium. The ratio of water/ethanol and the heating temperature play important roles in the formation of these multihollow particles. It was found that the cage-like polymer particles could be obtained when the ratio of ethanol/water is 5:5 (w/w), with a temperature above 50?°C. After a detailed study, the formation mechanism was proposed based on an SP swollen (ethanol and heptane penetrating process) and phase separation process. This new method for fabricating the cage-like multihollow polymer particles has a great meaning not only on confirming the formation mechanism, but also on providing an effective way to prepare the special hollow core/porous shell polymer particles, which could have wide range of potential applications, such as catalysts, sensors, and drug release.