Prediction of excess thermodynamic functions and activity coefficients of some polymeric liquid mixtures using a new equation of state

In this work, the excess thermodynamic properties, namely excess molar Gibbs energy, excess molar enthalpy, excess molar entropy, excess molar internal energy, and excess molar Helmholtz energy for four polymer mixtures and blends at different temperatures, pressures, and compositions have been calculated using the GMA equation of state. We have also calculated the activity coefficient for these polymeric mixtures using the GMA equation of state. The values of statistical parameters between experimental and calculated properties show the ability of this equation of state in reproducing and predicting the excess thermodynamic functions and activity coefficients for studied polymeric mixtures.     

Preparation and Characterization of pH-Sensitive Microgels of Poly((2-dimethylamino) ethyl methacrylate)

Summary: pH-sensitive microgels of poly((2-dimethylamino) ethyl methacrylate) (PDMAEMA) were prepared by dispersion polymerization of 2-dimethylamino ethyl methacrylate in a mixed solvent of water/ethanol. ¹HNMR, FTIR and SEM were used to confirm the chemical structure and morphological properties of the resulting microgels. Dynamic Light Scattering (DLS) was used to measure the hydrodynamic diameter of the particles. SEM micrographs showed that the microgel particles have a diameter of about 100–200 nm in dry state. Mean hydrodynamic diameter of the particles at their collapsed state at pH = 9.5 was found to be about 150 nm. DLS measurements at various pH values showed that the prepared microgels have a volume phase transition around pH = 8 at which the hydrodynamic diameter decreased from about 470 nm to around 150 nm corresponding to a 32 fold change in the mean volume of a microgel particle.     

A biocompatible composite based on poly(ε‐caprolactone fumarate) and hydroxyapatite

Fabrication of biodegradable composites applicable as hard tissue substitutes consisting of poly(ε‐caprolactone fumarate) (PCLF), methacrylic acid (MAA), and hydroxyapatite (HA) was investigated. PCLF macromers were synthesized by reaction of PCL diol with fumaryl chloride in the presence of propylene oxide and characterized by gel permeation chromatography, FTIR, and ¹H NMR spectroscopy. Composites were fabricated by incorporating HA as inorganic filler in PCLF matrix which followed by thermal curing of the composition using benzoyl peroxide and MAA as a free radical initiator and reactive diluent, respectively. Uniform distribution of the fine ceramic phase in the polymer matrix was elucidated by scanning electron microscopy. The effects of the initial macromer molecular weight and the filler volume fraction on mechanical properties and cytotoxicity of the composites were also examined. Significant enhancement in the mechanical properties was observed upon increasing HA content and/or initial PCLF molecular weight. The biocompatibility of the specimens was also improved with increasing ceramic phase. Copyright © 2010 John Wiley & Sons, Ltd.     

Bioinspired synthesis,characterization and antifungal activity of enzyme-mediated gold nanoparticles using a fungal oxidoreductase

The development of efficient cell-free systems of nanoparticle synthesis using microbial enzymes is a growing field of biological and green chemistry for the supportable improvement in nano-biotechnology. In the present study, we established a cell-free system for producing gold nanoparticles (AuNPs) using a fungal oxidoreductase named sulfite oxidoreductase purified to homogeneity from Fusarium oxysporum. The enzyme was purified by ultrafiltration followed by anion exchange chromatography on DEAE Sephadex A-50 gel, and its molecular weight was determined by gel filtration chromatography on Sephacryl S-300 gel. The purified enzyme had a molecular weight of 346 kDa. It was composed of three subunits of 176, 94 and 76 kDa. Purified enzyme was successfully used for production of gold nanoparticles in a cell-free system. Synthesized gold nanoparticles showed the highest absorbance at 520 nm wavelength as shown by UV–visible spectroscopy. They were spherical in shape with an average size of 20 nm as determined by scanning and transmission electron microscopy and dynamic light scattering. Assessment of the antifungal properties of synthesized nanoparticles by disk diffusion method indicated a potent growth inhibitory activity against all tested human pathogenic yeasts and molds by inhibition zones ranged from 10 to 18 mm. Taken together, our enzymatically established method of nanoparticle synthesis using a purified sulfite oxidoreductase of F. oxysporum can be considered as an efficient tool for generating harmless bioactive gold nanoparticles with potential applications in biology, medicine and industry.     

Performance Improvement in Fiber-Optic Spectrometers Using Photonic Crystal Fibers

Abstract

Resolution enhancement of a high-speed fiber-optic spectrometer is investigated in this article. The operation of these types spectrometers is based on conversion of the spectral-domain signal into the time domain by a dispersive element. A photonic crystal fiber is used as a dispersive fiber in this spectrometer. Resolution enhancement of considered spectrometer with photonic crystal fibers is studied. The fiber loss and length minimization in this spectrometer are obtained. Simulation results show that an increase in resolution will cause a decrease in the speed of the spectrometer. Trade offs between resolution and speed are studied.     

Preparation and Characterization of Agarose-Gelatin Blend Hydrogels as a Cell Encapsulation Matrix: An In-Vitro Study

Cell encapsulation represents an alternative nonviral technique to treat multiple diseases, leading to a reduction or even absence of administration of immunosuppressants. Hydrogels have been introduced as novel materials suitable for cell encapsulation. This study involves agarose–gelatin blend hydrogels with four different weight percentage ratios (100:0, 75:25, 50:50, 25:75) of agarose to gelatin. Prepared blend hydrogels were assessed in terms of rheological behavior (gel point by using complex viscosity), cell attachment (hemocytometer), cell viability and cytotoxicity (3-(3,4-dimethylthiazol-2-yl)-2,5-diphenyltetrazoliium bromide, MTT assay), and mechanical and integral stability (Bradford test and shear force rupture assay, respectively). Based on the obtained rheological experimental results, the sol-gel transition point for 50:50 was in the physiological condition range (35°C–37°C). The percent of nonattached cells on the surface of the hydrogel decreased from 92% for the 100:0 sample to 46.3% for the 50:50 sample, and the cell viability was more than 95%. A good structural integrity was achieved for samples with weight ratio of 50:50; 20.195% gelatin was released during the 24 h in phosphate buffer solution at 25°C and the mechanical stability of agarose–gelatin microcapsules under shear force were improved about 14% rather than pure agarose microcapsule.     

Lattice Boltzmann Pore Scale Simulation of Natural Convection in a Differentially Heated Enclosure Filled with a Detached or Attached Bidisperse Porous Medium

In this research, pore scale simulation of natural convection in a differentially heated enclosure filled with a conducting bidisperse porous medium is investigated using the thermal lattice Boltzmann method. For the first time, the effect of connection of the bidisperse porous medium to the enclosure walls is studied by considering the attached geometry in addition to the detached one. Effect of most relevant parameters on the streamlines and isotherms as well as hot wall average Nusselt number is studied for two of the bidisperse porous medium configurations. It is observed that effect of geometrical and thermo-physical parameters of the bidisperse porous medium on the heat transfer characteristics is more complicated for the attached configuration. To assess the validity of the local thermal equilibrium condition in the micro-porous media, the pore scale results are used to compute the percentage of the local thermal non-equilibrium for two of the bidisperse porous medium configurations. It is concluded that for the detached configuration, the local thermal equilibrium condition is confirmed in the entire micro-porous media for the ranges of the parameters studied here. However, for the attached geometry, it is shown that departure from the local thermal equilibrium condition is observed for the higher values of the Rayleigh number, micro-porous porosity, solid–fluid thermal conductivity ratio, and the smaller values of the macro-pores volume fraction.     

Tin-based halide perovskite materials: properties and applications

Organic–inorganic hybrid halide perovskite materials have attracted considerable research interest, especially for photovoltaics. In addition, their scope has been extended towards light-emitting devices, photodetectors, or detectors. However, the toxicity of lead (Pb) element in perovskite compositions limits their applications. Therefore, a tremendous research effort on replacing is underway. More specifically, tin-based perovskites have shown the highest potential for this purpose. However, many challenges remain before these materials reach the goals of stability, safety, and eventually commercial application. This perspective considers many aspects and the critical development possibilities of tin-based perovskites, including drawbacks and challenges based on their physical properties. Additionally, it provides insights for future device applications that go beyond solar cells. Finally, the existing challenges and opportunities in tin-based perovskites are discussed.

This perspective presents the current status and prospects of tin-perovskites and the relevant optoelectronic device applications.