Fluoroboric acid adsorbed on silica-gel (HBF4-SiO2) as a new, highly efficient and reusable heterogeneous catalyst for thia-Michael addition to α,β-unsaturated carbonyl compounds

Fluoroboric acid adsorbed on silica-gel (HBF₄-SiO₂) has been found to be a new and highly efficient heterogeneous catalyst for thia-Michael addition to α,β-unsaturated carbonyl compounds under solvent-free conditions. In the case of 1,3-diaryl-2-propenones, the reactions are best carried out in MeOH. The rate of thia-Michael addition was dependent on the steric hindrance at the β-carbon of the α,β-unsaturated carbonyl substrate as well as surrounding the thiol moiety and was exploited for selective thia-Michael addition during intermolecular competition between two enones with a common thiol and between two aryl/alkyl thiols for a common enone. The methodology finds application for one-pot syntheses of 2,3-dihydro-1,5-benzothiazepines.     

Optical and structural modeling of disclination lattices in carbonaceous mesophases

An integrated microstructural and optical model for carbonaceous mesophases is developed and used to explain the principles that govern the formation and stability of experimentally observed disclination lattices. The model is able to capture the orientation features of disclination lattices, including the type and location of disclination lines, and the orientation field in the mesophase matrix. The optical model based on reflection polarized optical microscopy is able to replicate all the details observed in actual observations. The typical brush figures have the proper distribution, orientation, and intensity. The computational predictions offer science-based routes to create and control desirable material architectures based on carbonaceous mesophase-carbon fiber composites.     

Nickel boride mediated chemoselective deprotection of 1,1-diacetates to aldehydes and deprotection with concomitant reduction to alcohols at ambient temperature

A variety of 1,1-diacetates have been chemoselectively and efficiently deprotected to the corresponding aldehydes as well as deprotected and concomitantly reduced to the corresponding alcohols in high yields at ambient temperature with nickel boride generated in situ using different molar ratios of sodium borohydride and nickel (II) chloride in methanol at room temperature. Deprotection and reduction of a variety of aromatic, aliphatic and heterocyclic acylals have been achieved efficiently. Mild reaction conditions, easy work-up, high yields and chemoselectivity demonstrate the efficiency of this new method.     

[2 + 2] Cycloaddition Reactions of Butadienyl Ketene with 1,4‐Diazabuta‐1,3‐dienes: Synthesis of Functionalized Butadienyl‐4‐iminomethyl‐azetidin‐2‐ones and Butenylidene‐butadienyl‐[2,2′‐biazetidine]‐4,4′‐diones

The reactions of butadienylketene with variety of 1,4‐diazabuta‐1,3‐dienes are studied. The reactions resulted in the formation of previously unknown functionalized cis butadienyl‐4‐iminomethyl‐azetidin‐2‐ones and butenylidene‐butadienyl‐[2,2′‐biazetidine]‐4,4′‐ diones. Butadienyl ketene reacts in [2+2] cycloaddition fashion with both iminic portion of 1,4‐ diazabuta‐1,3‐dienes and competitive [4+2] cycloaddition reaction of 1,4‐diazabuta‐1,3‐dienes as 4π component with butadienyl ketene as 2π component are not observed.     

Porous Anionic Co(II) Metal-Organic Framework,with a High Density of Amino Groups,as a Superior Luminescent Sensor for Turn-on Al(III) Detection

Accumulation of high concentrations of Al(III) in body has a direct impact on health and therefore, the trace detection of Al(III) has been a matter for substantial concern. An anionic metal organic framework ({[Me₂NH₂]_0.5[Co(DATRz)_0.5(NH₂BDC)] ⋅ xG}_n; 1 ; HDATRz=3,5-diamino-1,2,4-triazole, H₂NH₂-BDC=2-amino-1,4-benzenedicarboxylic acid, G=guest molecule) composed of two types of secondary building units (SBU) and channels of varying sizes was synthesized by employing a rational design mixed ligand synthesis approach. Free −NH₂ groups on both the ligands are immobilized onto the pore surface of the MOF which acts as a superior luminescent sensor for turn-on Al(III) detection. Furthermore, the large channels could allow the counter-ions to pass through and get exchanged to selectively detect Al(III) in presence of other seventeen metal ions with magnificent luminescence enhancement. The observed limit of detection is as low as 17.5 ppb, which is the lowest among the MOF-based sensors achieved so far. To make this detection approach simple, portable and economic, we demonstrate MOF filter paper test for real time naked eye observation.     

Optimal sampled-data controls with running inequality state constraints: Pontryagin maximum principle and bouncing trajectory phenomenon

Mathematical Programming - In the present paper we derive a Pontryagin maximum principle for general nonlinear optimal sampled-data control problems in the presence of running inequality state...     

Stochastic modeling of evaporating sprays within a consistent hybrid joint PDF framework

In the present study, a framework for modeling two-phase evaporating flow is presented, which employs an Eulerian–Lagrangian–Lagrangian approach. For the continuous phase, a joint velocity-composition probability density function (PDF) method is used. Opposed to other approaches, such PDF methods require no modeling for turbulent convection and chemical source terms. For the dispersed phase, the PDF of velocity, diameter, temperature, seen gas velocity and seen gas composition is calculated. This provides a unified formulation, which allows to consistently address the different modeling issues associated with such a system. Because of the high dimensionality, particle methods are employed to solve the PDF transport equations. To further enhance computational efficiency, a local particle time-stepping algorithm is implemented and a particle time-averaging technique is employed to reduce statistical and bias errors. In comparison to previous studies, a significantly smaller number of droplet particles per grid cell can be employed for the computations, which rely on two-way coupling between the droplet and gas phases. The framework was validated using established experimental data and a good overall agreement can be observed.     

Nanocomposites of polyamide‐11 and carbon nanostructures: Development of microstructure and ultimate properties following solution processing

There is growing interest in the incorporation of nanoparticles into engineering polymers to improve various functional properties. However, ultimate properties of nanocomposites are affected by a large number of factors including the microstructural distributions that are generated during processing. In this work, polyamide‐11 (PA‐11) (also known as nylon‐11) nanocomposites are generated with carbon nanostructures employing a solution crystallization technique at multiple polymer and nanoparticle concentrations, followed by drying, molding, uniaxial stretching and the analysis of the microstructural distributions and tensile properties of the nanocomposites. The morphology of crystals of PA‐11 encapsulating the nanoparticles changed from nano‐hybrid shish‐kebabs at low polymer concentration (0.02 wt % PA‐11 in solvent) to spherulites at high polymer concentration (10 wt % PA‐11 in solvent). The drawing down of nanocomposite films at draw ratios ranging from 2 to 5 at 100 °C resulted in a shift of the PA‐11 polymorph from the generally‐encountered α phase to the technologically interesting γ phase (which is the crystal phase attributed to the piezoelectric and pyroelectric properties of PA‐11). The drawing down also increased of the tensile modulus and yield stress of the nanocomposite films. In contrast, the α phase was conserved at a drawdown temperature of 150 °C, which was attributed to the resulting smaller normal force, i.e., the normal stress difference and the higher temperature allowing the partial relaxation of some of the macromolecules. These findings illustrate how PA‐11 can be structured in the presence of carbon nanotubes and nanofibers to achieve enhanced functionality, which could broaden the application areas and utility of this polymer. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 49: 1311–1321, 2011     

A comparison of the properties of two structurally equivalent but regiochemically different mono‐alkylated polybithiophenes prepared through AABB‐type stille polycondensation

Previous routes to polymers with mono‐alkylated bithiophenes have proceeded through polymerization of monoalkyl‐2,2′‐bithiophene monomers through oxidative or AB‐type cross‐coupling polymerizations. The resulting polymer regiochemistry affects both the location and orientation of the polymer side‐chains. In contrast, AABB‐type cross‐coupling polymerizations can control the location and in some cases the orientation of the side‐chains. To study how this control can impact polymer properties, two poly(monodecyl‐2,2′‐bithiophene) polymers have been synthesized through Stille AABB‐type polycondensations of 2,5‐bis(trimethylstannyl)thiophene with different monomers. The alkyl side‐chains are located on every other thiophene, but polymer 1 consists of both head‐to‐tail and head‐to‐head dyads, whereas polymer 2 is made up of only head‐to‐head dyads. ¹H NMR, ¹³C NMR, and heteronuclear single quantum correlation spectroscopy are used to confirm and contrast the polymer regiochemistries. The physical properties of the two polymers are analyzed using UV–vis spectroscopy, differential scanning calorimetry, and grazing‐incidence X‐ray diffraction. Polymer 2 is found to display significantly more aggregation in solution than 1, and it displays different thermal properties. The film properties of polymers 1 and 2, however, are very similar, with nearly identical UV–vis profiles and d‐spacing values as determined by grazing incidence X‐ray diffraction. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013