Extraction of polychlorinated biphenyl with supercritical carbon dioxide, sulfur hexafluoride and subcritical water

In the extraction of spiked PCB from soil, three extracting fluids were investigated: supercritical carbon dioxide (CO₂), supercritical sulfur hexafluoride (SF₆) and subcritical water. Among the tested fluids SF₆ appeared to be appropriate especially for the extraction of low polar PCB. CO₂ and water were found to be suitable for the quantitative extraction of all PCB. Water was judged as the best because of its low price, good availability and environmental safety.     

Synthesis and Characterizations of Ti(O‐i‐Pr)Cl3(THF)(PhCOR) (R = H,Me, Ph) and Ti(O‐i‐Pr)Cl3(PhCOR)2 (R = Me,Ph). The Molecular Structure of Ti(O‐i‐Pr)Cl3(PhCOPh)2

A series of titanium(IV) complexes Ti(O‐i‐Pr)Cl₃(THF)(PhCOR) (R = H ( 1 ), CH₃ ( 2 ), or Ph ( 3 )) is prepared quantitatively from reactions of [Ti(O‐i‐Pr)Cl₂(THF)(μ‐Cl)]₂ with 2 molar equiv. PhCOR. Treatment of Ti(O‐i‐Pr)Cl₃ with 2 molar equiv. of PhCOR affords the disubstituted complexes Ti(O‐i‐Pr)Cl₃(PhCOR)₂ (R = CH₃ ( 4 ) or Ph ( 5 )). The ¹³C NMR study of these complexes shows that the relative bonding abilities are in the order of PhCOCH₃ > PhCHO > PhCOPh. The molecular structure of 5 reveals that one of the benzophenone ligands is trans to the strongest 2‐propoxide ligand with a long Ti‐O(carbonyl) distance of 2.193(5) Å which is much longer than the other Ti‐O(carbonyl) distance of 2.097(4) Å by ?0.1 Å. All ligands cis to the alkoxide ligand are bending away from the alkoxide ligand with the RO‐Ti‐L angles ranging from 93.6(2) to 99.0(2)°.     

Method development for the determination of teicoplanin in patient serum by solid phase extraction and micellar electrokinetic chromatography

In-hospital deaths caused by the infection of methicillin-resistant Staphylococcus aureus (MRSA) are on the increase worldwide. Teicoplanin is a potent glycopeptide antibiotic against MRSA. A rapid and cost-saving micellar electrokinetic chromatography (MEKC) method combined with solid phase extraction (SPE) was developed and then validated to quantify teicoplanin in patient serum in this work. The method includes the following steps: (1) pretreatment of the serum samples with 10 M urea to denature proteins, (2) application of SPE by using an OASIS HLB cartridge to clean up and concentrate the serum samples, and (3) use of MEKC for sample analysis. Under the optimized conditions, the SPE recovery of teicoplanin is higher than 90%. The six major components of teicoplanin could be baseline-separated from one another and endogenous materials in 12 min with a background electrolyte composed of 20 mM sodium tetraborate buffer pH 8.8, 40 mM sodium dodecyl sulfate, and 11% (v/v) ACN. The relative standard deviation (R.S.D.) of the peak area ratios for method repeatability (n = 6) and intermediate precision (inter-day, n = 3) were found to be lower than 4.18% and 5.30%, respectively. The calibration curves were linear between the chromatographic response and total teicoplanin concentration over the range of 5 μg/mL to 55 μg/mL. Limit of detection (LOD) for each of the six components was found to be lower than 0.06 μg/mL. Pearson’s correlation revealed that a good correlation (r = 0.98) was obtained between the SPE-MEKC method and the fluorescence polarization immunoassay (FPIA) method. The developed method can be used to quantitatively determine serum teicoplanin concentration in patients for dose monitoring and clinical research.     

Simple and efficient nickel-catalyzed cross-coupling reaction of alkynylalanes with benzylic and aryl bromides

Highly efficient and simple coupling reactions of benzylic and aryl bromides with aluminium acetylide catalyzed by NiCl(2)(PPh(3))(2) are reported. The coupling reactions proceed at room temperature employing 4 mol% catalyst, affording coupling products in excellent yields of up to 95% in short reaction times. The system worked efficiently with aryl and heterocyclic bromides as well.     

Interfacial properties of Pluronics and the interactions between Pluronics and cholesterol/DPPC mixed monolayers

Pluronics are triblock copolymers of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) with wide range of hydrophilic-lipophilic balance. In order to investigate the relationship between the chemical structures of Pluronics and the interfacial properties at the air-water interface by monolayer techniques, Pluronics L61, P65, F68, P84, P123, L35, and P105 were selected. Since cholesterol influenced substantially the molecular packing stage and the characteristics of cell membranes, the interactions between Pluronics and model cell membranes in the absence and presence of cholesterol were compared. The results of pi-A isotherms and surface elasticities of Pluronic monolayers indicated that the first and second transition like stage were mainly affected by the numbers of EO and PO monomers, respectively. Pluronics with higher hydrophobicities demonstrated larger surface activities and penetration abilities to dipalmitoylphosphatidylcholine (DPPC) monolayers, which might be due to hydrophobic interactions and van der Waals forces. In the presence of cholesterol, hydrogen bonding effects was supposed to exist between the 3beta-hydroxy group of cholesterol and ether oxygen of PEO chains, which led Pluronic F68, with the longest PEO chain herein, to exhibit significantly higher penetration ability. Our findings proposed a theoretical basis for selection of optimized drug carriers and the starting point for further investigations.     

Thermal property changes of poly(N-isopropylacrylamide) microgel particles and block copolymers

Investigation of the thermo-reversible properties of different poly(N-isopropyl acrylamide) samples, including microgels and block copolymers, with a combination of methods such as electron microscopy, dynamic light scattering, analytical ultracentrifugation, electrophoresis and ultrasound resonator technology allows comprehensive characterisation of the phase transition. By the combination of methods, it was possible to show that the precipitated polymer phase contains at 40 °C between 40 and 50 vol.% of water. Besides free bulk water, there is also bound water that strongly adheres to the N-isopropyl acrylamide units (about 25 vol.%). Ultrasound resonator technology, which is a non-sizing characterisation method, revealed for the microgel particles two more temperatures (at about 35 and between 40 °C and 50 °C depending on the chemical nature) where characteristic changes in the ultrasound attenuation take place. Moreover, the experimental data suggest that the phase transition temperature is related to surface charge density of the precipitated particles.     

Using internal electrostatic fields to manipulate the valence manifolds of copper complexes

A series of tetradentate tris(phosphinimine) ligands (^R3P₃tren) was developed and bound to Cu^I to form the trigonal pyramidal, C_3v-symmetric cuprous complexes [^R3P₃tren-Cu][BAr^F₄] (1PR3) (PR₃ = PMe₃, PMe₂Ph, PMePh₂, PPh₃, PMe₂(NEt₂), BAr^F₄ = B(C₆F₅)₄). Electrochemical studies on the Cu^I complexes were undertaken, and the permethylated analog, 1PMe3, was found to display an unprecedentedly cathodic Cu^I/Cu^II redox potential (−780 mV vs. Fc/Fc⁺ in isobutyronitrile). Elucidation of the electronic structures of 1PR3via density functional theory (DFT) studies revealed atypical valence manifold configurations, resulting from strongly σ-donating phosphinimine moieties in the xy-plane that destabilize 2e (d_xy/d_x²−y²) orbital sets and uniquely stabilized a₁ (d_z²) orbitals. Support is provided that the a₁ stabilizations result from intramolecular electrostatic fields (ESFs) generated from cationic character on the phosphinimine moieties in ^R3P₃tren. This view is corroborated via 1-dimensional electrostatic potential maps along the z-axes of 1PR3 and their isostructural analogues. Experimental validation of this computational model is provided upon oxidation of 1PMe3 to the cupric complex [^Me3P₃tren-Cu][OTf]₂ (2PMe3), which displays a characteristic Jahn–Teller distortion in the form of a see-saw, pseudo-C_s-symmetric geometry. A systematic anodic shift in the potential of the Cu^I/Cu^II redox couple as the steric bulk in the secondary coordination sphere increases is explained through the complexes'' diminishing ability to access the ideal C_s-symmetric geometry upon oxidation. The observations and calculations discussed in this work support the presence of internal electrostatic fields within the copper complexes, which subsequently influence the complexes'' properties via a method orthogonal to classic ligand field tuning.

Secondary coordination sphere electrostatic effects tune the valence manifolds of copper centers, impacting molecular geometries, photophysical properties, and redox potentials.     

Algebraic methods for the solution of linear functional equations

The equation

$$\sum^{n}_ {i=0} a_{i}f(b_{i}x + (1 - b_{i})y) = 0$$

belongs to the class of linear functional equations. The solutions form a linear space with respect to the usual pointwise operations. According to the classical results of the theory they must be generalized polynomials. New investigations have been started a few years ago. They clarified that the existence of non-trivial solutions depends on the algebraic properties of some related families of parameters. The problem is to find the necessary and sufficient conditions for the existence of non-trivial solutions in terms of these kinds of properties. One of the earliest results is due to Z. Daróczy [1]. It can be considered as the solution of the problem in case of n = 2. We are going to take more steps forward by solving the problem in case of n = 3.

     

Catalysts with mixed ligands on immobilized supports. Electronic and steric advantages

[reaction: see text] Immobilized dirhodium(II) catalysts having mixed chiral ligands enhance reactivity (AH = azetidinone) and influence stereoselectivity in cyclopropanation and carbon-hydrogen insertion reactions.     

Ab Initio Construction of Quasiadiabatic Potential-Energy Surfaces for Cycloaddition Reactions of Ethene and Substituted Allylic Cations

The nature of some well known 2π + 2π cycloaddition reactions was studied by explicit construction of the quasiadiabatic potential-energy surfaces for the cycloaddition of ethene and various monosubstituted allylic cations. Such surfaces determined by ab initio MO computations are particularly suitable for analysis of symmetry selection rules. By examining the characteristics of such surfaces, we have studied the substituent effect and the role played by the positive charge in such systems. Qualitative discussion based on simplified MO, involving fewer electrons, is also given.