Forward-angle yields of 2≤Z≤11 isotopes in the reaction of 18O(35A MeV) with 9Be

A systematic investigation of the forward-angle inclusive yields of 2≤Z≤11 isotopes produced in collisions of ¹⁸O projectile nuclei with a ⁹Be target in the Fermi energy region (35A MeV) is performed. The measurements were based on the use of the COMBAS double achromatic kinematical separator in the spectrometry mode at the Flerov Laboratory of Nuclear Reactions at the Joint Institute for Nuclear Research, FLNR (JINR, Dubna). The velocity, isotopic, and element distributions are presented. There is no unique mechanism that would explain the total set of results obtained in this experiment. A dominant role of low-energy reaction mechanisms is observed. The intensity of secondary beams of halolike nuclei ¹¹Li, ¹²Be, and ¹⁴Be is determined.     

Segregation in the Falicov--Kimball Model

The Falicov–Kimball model is a simple quantum lattice model that describes light and heavy electrons interacting with an on-site repulsion; alternatively, it is a model of itinerant electrons and fixed nuclei. It can be seen as a simplification of the Hubbard model; by neglecting the kinetic (hopping) energy of the spin up particles, one gets the Falicov–Kimball model. We show that away from half-filling, i.e. if the sum of the densities of both kinds of particles differs from 1, the particles segregate at zero temperature and for large enough repulsion. In the language of the Hubbard model, this means creating two regions with a positive and a negative magnetization. Our key mathematical results are lower and upper bounds for the sum of the lowest eigenvalues of the discrete Laplace operator in an arbitrary domain, with Dirichlet boundary conditions. The lower bound consists of a bulk term, independent of the shape of the domain, and of a term proportional to the boundary. Therefore, one lowers the kinetic energy of the itinerant particles by choosing a domain with a small boundary. For the Falicov- Kimball model, this corresponds to having a single “compact” domain that has no heavy particles. Received: 21 June 2001 / Accepted: 4 January 2002     

Beta-exposure in a neutron activation laboratory

Summary In virtually all neutron activation analysis laboratories, researchers are given film badges known as thermoluminescence dosimeters (TLD's) that are monitored on a monthly basis. Sometimes additional pocket dosimeters are worn to get a daily reading of exposure, while in other instances ring badges are worn to assess beta doses. However, more than often little consideration is given to beta-exposure rates that arise from the plethora of radionuclides produced in the many types of samples irradiated. A common mistake is to assess gamma-exposures of activated samples that rely on the use of a beta-shield on the survey meter. Our experimental results have shown that there are many high energy beta-particles from neutron activated samples that can easily penetrate the beta-shield and thus give an underestimation of the total beta-exposure.     

A Noninvasive, on Wafer Method to Determine the Intrinsic Stress of a Polymer Layer

The method described in this paper allows an investigator to determine the intrinsic stress of a polymer layer in a way that does not result in damage to devices or test structures. The method requires that a small area of the polymer be released from the substrate to form a diaphragm. The diaphragm is stimulated with acoustic white noise and the diaphragm movement is monitored with a laser vibrometer. The first few resonance frequencies of the diaphragm are obtained using a laser vibrometer and then those frequencies are used to calculate the membrane intrinsic bi-axial tension.     

Projection of Markov Measures May Be Gibbsian

We study the induced measure obtained from a 1-step Markov measure, supported by a topological Markov chain, after the mapping of the original alphabet onto another one. We give sufficient conditions for the induced measure to be a Gibbs measure (in the sense of Bowen) when the factor system is again a topological Markov chain. This amounts to constructing, when it does exist, the induced potential and proving its Hölder continuity. This is achieved through a matrix method. We provide examples and counterexamples to illustrate our results.     

Conformational analysis of dipeptide‐derived polyisocyanides

The conformational properties of polymers derived from isocyanodipeptides have been investigated with a combination of model calculations, X‐ray diffraction, and circular dichroism spectroscopy. Depending on the configuration of the side chains, defined arrays of hydrogen bonds along the polymeric backbone are formed. This leads to a well‐defined conformation as, for example, expressed in the formation of lyotropic liquid‐crystalline phases and increased helical stability. Upon the disruption of the hydrogen bonds by a strong acid, a less well‐defined macromolecular conformation is observed. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1725–1736, 2003     

On additives, morphological evolution and dielectric breakdown in low density polyethylene

A series of low density polyethylene systems has been studied with respect to structural evolution and short-term dielectric breakdown behaviour. All materials were based upon a single polymer, that is commonly used in high voltage applications, but with different additives. In all three of these systems, multiple melting transitions were observed, as a result of molecular fractionation effects during crystallization. In the virgin polymer, a space-filling banded spherulitic morphology was found to develop at low temperatures (102 °C and below) whereas, at higher temperatures, only a few isolated axialites were observed. Inclusion of the antioxidant resulted in greatly increased nucleation densities, such that, at low temperatures, no evidence of spherulitic organisation remained. At higher temperatures, sheaf-like lamellar aggregates developed, which were much smaller and much more numerous than in the case of the virgin polymer. Further addition of dicumyl peroxide (DCP) resulted in the rapid formation of a crosslinked network at 200 °C. Some crosslinking also occurred at 150 °C, but over a much longer timescale. Where extensive crosslinking occurred prior to crystallization, the resulting gel inhibited structural development, such that only a few small, isolated sheaves were able to form at 102 °C. In view of the principal application area of this material, the breakdown strength of each of the above systems was then measured and the whole data set was analysed statistically. When structural factors were considered alongside the statistics, no clear trends emerged to indicate that either the compositional or morphological variations were reflected in the short-term electrical failure processes.