Small angle neutron scattering from oxygen precipitates in silicon

The formation of silicon oxide precipitates from Czochralski grown silicon depends on the time and temperature of the heat treatment as well as on the initial content of interstitially dissolved oxygen. Samples containing between 5×10¹⁷ O_i/cm³ and 13×10¹⁷ O_i/cm³ have been heated at 750° C for 96 h. SiO₂ precipitates of various shape and size have been obtained and investigated by means of small angle neutron scattering (SANS) in the Q-range 0.05 Å^–1<Q<0.2 Å^–1. The obtained SANS patterns reveal a typical anisotropy of their intensity distribution, which splits into a central peak at Q<0.1 Å^–1 due to the shape of the individual particles and a number of weak intensities for large Q-values, originating from a correlation between defects, possibly between the precipitates. While these correlation peaks in the SANS patterns are seen best for rather low values of about (5–7)×10¹⁷ O_i/cm³ oxygen content, the central peak anisotropy is most pronounced for higher values of ca 10×10¹⁷ O_i/cm³. The integrated intensity of the central peak increases with increasing initial oxygen content. For comparison, untreated samples of the same initial oxygen content do not reveal any anisotropic SAN scattering or a broadened central peak beam.     

On the optimum set of polarization measurements for the scattering of two indentical fermions to determine the helicity amplitudes

The polarization asymmetries related to usual polarizations combine at least 4 different helicity amplitudes. The introduction of ±45° inclined transverse polarizations allows us to obtain the complete set of new polarization asymmetries combining only up to 3 helicity amplitudes. There are no further polarization asymmetries depending on a smaller number of helicity amplitudes. These expressions are most economical to determine the helicity amplitudes from observed data. Some of them are suitable to study especially the spin-flip effects. We give a complete Table of all such polarization asymmetries.     

A Primitive Non-symmetric 3-Class Association Scheme on 36 Elements with p11 = 0 Exists and is Unique

In this paper we construct a primitive, non-symmetric 3-class association scheme with parameters v = 36, v₁ = 7, p¹₁₁ = 0 and p²₁₁ = 4 and show that such a scheme is determined by its parameters.     

Minimizing Maximum Weighted Error for Imprecise Computation Tasks

We consider the problem of preemptively scheduling a set of imprecise computation tasks on m ≥ 1 identical processors, with each task T_i having two weights, w_i and w′_i. Two performance metrics are considered: (1) the maximum w′-weighted error; (2) the total w-weighted error subject to the constraint that the maximum w′-weighted error is minimized. For the problem of minimizing the maximum w′-weighted error, we give an algorithm which runs in O(n³ log²n) time for multiprocessors and O(n²) time for a single processor. For the problem of minimizing the total w-weighted error subject to the constraint that the maximum w′-weighted error is minimized, we give an algorithm which also has the same time complexity.     

Olefin terpolymerizations. II. 4-vinylcyclohexene and cyclooctadiene

4-Vinylcyclohexene (VCH) and cyclooctadiene (COD) were investigated as termonomers in EPDM (ethylene/propylene/diene) synthesis by using rac-ethylenebis (1-η⁵-indenyl) zir-conium dichloride ( 1 ) as a catalyst precursor. Homopolymerizations of VCH, vinylcycloh-exane and cyclohexene were compared. The parameter K_πκ_p, which is the apparent rate constant for Ziegler-Natta polymerization, is about the same for VCH and vinylcyclohexanebut is 10 times smaller for cyclohexene. Therefore, the linear olefinic double bond is more active than the cyclic internal double bond. VCH reduces ethylene polymerization rate but not propylene polymerization rate in copolymerizations. In terpolymerizations, VCH tends to suppress ethylene incorporation especially at elevated polymerization temperature and Lowers the polymer MW by about two-fold. COD has very low activity as a termonomer. © 1995 John Wiley & Sons, Inc.     

Kinetics of zinc(II) cloride extraction with tributyl phosphate

The equilibrium and rate of solvent extraction of zinc chloride complexes from HCl solutions into benzene solutions of tributyl phosphate (TBP) have been studied. The extracted species are discussed in the light of the results. The extraction was found to be first order with respect to both Zn(II) and TBP, and zero order for HCl. The rate-controlling steps are discussed and the rate constants for these reactions are calculated.     

Determination of total ammonium-nitrogen and free ammonia in a fermentation medium by sequential injection analysis

Summary Automated methods for the determination of ammonium and ammonia are reviewed, and techniques based on gas diffusion using a semi-permeable membrane were selected for the determination of both total ammonium-nitrogen and free ammonia in fermentation samples. A simple and robust instrument based on sequential injection analysis (SIA) consisting of a piston pump and two selector valves was used. Two different methods of ammonia detection, the Berthelot method and detection using pH-indicators, have been evaluated and compared. The indicator method showed higher reproducibility and the range of determination could easily be adjusted to match the concentrations of the samples. The range of determination could be adjusted from 0.05 mmol/l to 350 mmol/l, depending on choice of acceptor solution. This method has been evaluated with fermentation medium samples and tested on-line in a yeast fermentation process.Dedicated to Professor Dr. Wilhelm Fresenius on the occasion of his 80th birthday     

Sprouting side chain conformations in X-PLOR simulations of peptides

A scheme for sprouting peptide side chains using X-PLOR is introduced using an example from the collagen system to show how reasonable starting structures for minimization studies may be created. © 1993 John Wiley & Sons, Inc.