Multiresidue method for the analysis of more than 140 pesticide residues in fruits and vegetables by gas chromatography coupled to triple quadrupole mass spectrometry

A new multiresidue method has been developed and validated for the determination of more than 140 pesticide residues in cucumber and orange by gas chromatography coupled to triple quadrupole mass spectrometry (GC-QqQ-MS/MS) in a single run of 25.50 min. The triple quadrupole (QqQ) analyzer simultaneously operated in the selected reaction monitoring (SRM) and selected ion monitoring (SIM) modes, acquiring two or three transitions per compound. Samples were extracted by the application of a single-phase extraction of 10 g of sample with acetonitrile containing 1% of acetic acid, followed by a liquid-liquid partition formed by the addition of 4 g of MgSO(4) and 1 g of NaOAc. A dispersive solid-phase extraction (D-SPE) with primary secondary amine (PSA) was applied to clean up the extracts. A final concentration step was included in order to increase sensitivity in the instrumental analysis. The method was properly validated in each matrix in a wide dynamic range (10-400 microg kg(-1)): this work relies on a new quantification strategy by the use of two calibration curves to increase the dynamic range, which permitted reduction of sample dilutions and increase in sample throughput. Recovery was studied at three concentration levels (11.5, 50.0, and 150.0 microg kg(-1)), yielding values in the range 70-110% with precision values, expressed as relative standard deviation (RSD), lower than 20 and 25% for the intraday and interday precision, respectively. Limits of quantification (LOQs) were established at 10 microg kg(-1), the lowest maximum residue level (MRL) value set by the European Union in vegetables. The method was successfully applied to the analysis of pesticide residues in real samples from the southeastern Spain. Copyright (c) 2008 John Wiley & Sons, Ltd.     

Three-way multivariate analysis of metal fractionation results from sediment samples obtained by different sequential extraction procedures and ICP-OES

Three typical schemes for metal fractionation were applied to analyse coastal surface sediment samples from Bahía Blanca estuary, where an important industrial emplacement is located. Also, three certified reference materials for total metal concentrations were analysed. The studied metals were cadmium, chromium, copper, lead and zinc because of their hazardous potential and related abundance in the estuary. The concentration of metals was determined by inductively coupled plasma-optical emission spectrometry (ICP-OES). A three-way multivariate analysis was performed in order to obtain a better visualization of the experimental data. The extracted information was used to evaluate the equivalence among the results obtained by the three sequential extraction schemes. The data were analysed by parallel factor analysis (PARAFAC). PARAFAC models with two factors describe appropriately the data sets (explained variance about 54% and core consistency of 100%). The multivariate decomposition showed that the three applied schemes are able to describe equally well the behaviour of the metals in the different sediment fractions.     

The ion sensitivity of surface conductive single crystalline diamond

Charge build-up at the solid/aqueous interface is a ubiquitous phenomenon that determines the properties of interfacial electrical double layers. Due to its unique properties, the surface of diamond offers an attractive platform to investigate charging mechanisms in aqueous solutions. We investigate the surface charge by studying the ion sensitivity of H-terminated single crystalline diamond surface conductive layers. The effect of monovalent and divalent salts has been probed at different pH values. For a pH above 3.5, increasing the ionic strength results in a decrease of the surface conductivity, in contrast to the results obtained for pH below 3.5. Electrokinetic experiments are in good agreement with the surface conductivity measurements, showing an isoelectric point at pH 3.5 for the H-terminated diamond surface. We discuss the results in terms of the Coulombic screening by electrolyte ions of the surface potential, which is induced by a pH-dependent surface charge. The origin of this surface charge is discussed in terms of charge regulation by amphoteric hydroxyl surface groups and unsymmetrical adsorption of hydroxide and hydronium ions induced by the hydrophobic nature of the H-terminated diamond surface. This surface charge can have important consequences for processes governed by the diamond/aqueous interface, such as electron transfer to charged redox molecules, adsorption of charged molecules and proteins, and ion sensitivity.     

Spectroscopic and electrochemical studies of cocaine–opioid interactions

The drugs of abuse cocaine (C), heroin (H), and morphine (M) have been studied to enable understanding of the occurrence of cocaine–opioid interactions at a molecular level. Electrochemical, Raman, and NMR studies of the free drugs and their mixtures were used to study drug–drug interactions. The results were analyzed using data obtained from quantum-mechanical calculations. For the cocaine–morphine mixture (C–MH), formation of a binary complex was detected; this involved the 3-phenolic group and the heterocyclic oxygen of morphine and the carbonyl oxygen and the methyl protons of cocaine’s methyl ester group. NMR studies conducted simultaneously also revealed C–MH binding geometry consistent with theoretical predictions and with electrochemical and vibrational spectroscopy results. These results provide evidence for the occurrence of a cocaine–morphine interaction, both in the solid state and in solution, particularly for the hydrochloride form. A slight interaction, in solution, was also detected by NMR for the cocaine–heroin mixture. Figure "Schematic representation of the proposed model for cocaine:morphine salt interaction"     

Application of low-pressure gas chromatography/tandem mass spectrometry to the determination of pesticide residues in tropical fruits

A multiresidue method has been developed for determining pesticide residues in the tropical fruits kiwi, custard apple, and mango. The intended purpose of the method is for regulatory analyses of commodities for pesticides that have established maximum residue limits. A fast and simple extraction method with cyclohexane-ethyl acetate (1 + 1, v/v) and a high-speed homogenizer was optimized. Pressurized liquid extraction was evaluated as an alternative automated extraction technique. The pesticide residues were determined by using low-pressure gas chromatography coupled to tandem mass spectrometry. The proposed methodology was validated for each matrix. Pesticide recoveries ranged from 70 to 110%, with repeatability relative standard deviations of < or = 18% at spiking levels of 12 and 50 microg/kg. The limits of quantitation were in the range of 0.03-6.17 microg/kg, and the limits of detection were between 0.01 and 3.75 microg/kg. Mango can be selected as a representative matrix for calibration on the basis of the results of a potential matrix effect study. The method was successfully applied to the determination of pesticide residues in real samples in Spain.     

Validation of the concentration profiles obtained from the near infrared/multivariate curve resolution monitoring of reactions of epoxy resins using high performance liquid chromatography as a reference method

This paper reports the validation of the results obtained by combining near infrared spectroscopy and multivariate curve resolution-alternating least squares (MCR-ALS) and using high performance liquid chromatography as a reference method, for the model reaction of phenylglycidylether (PGE) and aniline. The results are obtained as concentration profiles over the reaction time. The trueness of the proposed method has been evaluated in terms of lack of bias. The joint test for the intercept and the slope showed that there were no significant differences between the profiles calculated spectroscopically and the ones obtained experimentally by means of the chromatographic reference method at an overall level of confidence of 5%. The uncertainty of the results was estimated by using information derived from the process of assessment of trueness. Such operational aspects as the cost and availability of instrumentation and the length and cost of the analysis were evaluated. The method proposed is a good way of monitoring the reactions of epoxy resins, and it adequately shows how the species concentration varies over time.     

Electrochemical and spectroscopic characterisation of amphetamine-like drugs: application to the screening of 3,4-methylenedioxymethamphetamine (MDMA) and its synthetic precursors

A complete physicochemical characterisation of MDMA and its synthetic precursors MDA, 3,4-methylenedioxybenzaldehyde (piperonal) and 3,4-methylenedioxy-β-methyl-β-nitrostyrene was carried out through voltammetric assays and Raman spectroscopy combined with theoretical (DFT) calculations. The former provided important analytical redox data, concluding that the oxidative mechanism of the N-demethylation of MDMA involves the removal of an electron from the amino-nitrogen atom, leading to the formation of a primary amine and an aldehyde. The vibrational spectroscopic experiments enable to afford a rapid and reliable detection of this type of compounds, since they yield characteristic spectral patterns that lead to an unequivocal identification.Moreover, the rational synthesis of the drug of abuse 3,4-methylenedioxymethamphetamine (MDMA or “ecstasy”) from one of its most relevant precursors 3,4-methylene-dioxyamphetamine (MDA), is reported. In addition, several approaches for the N-methylation of MDA, a limiting synthetic step, were attempted and the overall yields compared.     

Fast chromatographic method for the determination of dyes in beverages by using high performance liquid chromatography—Diode array detection data and second order algorithms

A fast chromatographic methodology is presented for the analysis of three synthetic dyes in non-alcoholic beverages: amaranth (E123), sunset yellow FCF (E110) and tartrazine (E102). Seven soft drinks (purchased from a local supermarket) were homogenized, filtered and injected into the chromatographic system. Second order data were obtained by a rapid LC separation and DAD detection. A comparative study of the performance of two second order algorithms (MCR-ALS and U-PLS/RBL) applied to model the data, is presented. Interestingly, the data present time shift between different chromatograms and cannot be conveniently corrected to determine the above-mentioned dyes in beverage samples. This fact originates the lack of trilinearity that cannot be conveniently pre-processed and can hardly be modelled by using U-PLS/RBL algorithm. On the contrary, MCR-ALS has shown to be an excellent tool for modelling this kind of data allowing to reach acceptable figures of merit. Recovery values ranged between 97% and 105% when analyzing artificial and real samples were indicative of the good performance of the method. In contrast with the complete separation, which consumes 10 mL of methanol and 3 mL of 0.08 mol L⁻¹ ammonium acetate, the proposed fast chromatography method requires only 0.46 mL of methanol and 1.54 mL of 0.08 mol L⁻¹ ammonium acetate. Consequently, analysis time could be reduced up to 14.2% of the necessary time to perform the complete separation allowing saving both solvents and time, which are related to a reduction of both the costs per analysis and environmental impact.     

Neutron diffraction studies of U4O9: comparison with EXAFS results

Conradson et al. have analyzed X-ray absorption fine-structure spectra of the UO2-U4O9 system and concluded that oxygen atoms are incorporated in U4O9 as oxo groups with U-O distances in the range 1.72-1.76 A. They also found that the uranium sublattice consists of an ordered portion and an additional 'spectroscopically silent' glassy portion. We have carried out studies of powdered U4O9 by neutron diffraction which contradict these conclusions from EXAFS measurements. Our analysis shows that there are no U-O bonds shorter than 2.2 A and that U4O9 is crystallographically ordered with no evidence of a glassy structure.