Extending reference scan drift correction to high-magnification high-cone-angle tomography

The reference scan method is a simple yet powerful method for measuring spatial drift of the x-ray spot during a low-cone-angle μ-CT experiment. As long as the drift is smooth, and occurring on a time scale that is long compared to the acquisition time of each projection, this method provides a way to compensate for the drift by applying 2D in-plane translations to the radiographs. Here we show that this compensation may be extended to the regime of high-magnification, high-cone-angle CT experiments where source drift perpendicular to the detector plane can cause significant magnification changes throughout the acquisition.     

The effect of metal dispersion on the resonance of antennas at infrared frequencies

In this paper the optical parameters at infrared frequencies of metallic thin films were obtained experimentally using a variable angle spectroscopic ellipsometer and used to simulate numerically the frequency response of antennas and antenna-coupled detectors at infrared frequencies (5–15 μm). The simulation results agree with previously published data and practical guidelines are presented for the design and fabrication of dipole and bowtie antennas at infrared frequencies.     

Nature of the pygmy resonance in continuous <Emphasis Type="Italic">γ</Emphasis> spectra

Two-step-cascade spectra of the ¹⁷¹Yb(n, γγ)¹⁷²Yb reaction have been measured using thermal neutrons. They are compared to calculations based on experimental values of the level density and radiative strength function obtained from the ¹⁷³Yb(³He, aγ)¹⁷²Yb reaction. The multipolarity of a 6.5(15) μ _N ² resonance at 3.3(1) MeV in the strength function is determined to be M1 by this comparison.     

Pump-probe differencing technique for cavity-enhanced, noise-canceling saturation laser spectroscopy

We present an experimental technique that permits mechanical-noise-free, cavity-enhanced frequency measurements of an atomic transition and its hyperfine structure. We employ the 532-nm frequency-doubled output from a Nd:YAG laser and an iodine vapor cell. The cell is placed in a folded ring cavity (FRC) with counterpropagating pump and probe beams. The FRC is locked with the Pound-Drever-Hall technique. Mechanical noise is rejected by differencing the pump and probe signals. In addition, this differenced error signal provides a sensitive measure of differential nonlinearity within the FRC.     

Three-dimensional subwavelength imaging by a photonic-crystal flat lens using negative refraction at microwave frequencies

We experimentally demonstrate subwavelength resolution imaging at microwave frequencies by a three-dimensional (3D) photonic-crystal flat lens using full 3D negative refraction. The photonic crystal was fabricated in a layer-by-layer process. A subwavelength pinhole source and a dipole detector were employed for the measurement. By point-by-point scanning, we obtained the image of the pinhole source shown in both amplitude and phase, which demonstrated the imaging mechanism and subwavelength feature size in all three dimensions. An image of two pinhole sources with subwavelength spacing showed two resolved spots, which further verified subwavelength resolution.     

Quantitative measurements of Ge surface segregation during SiGe alloy growth

Ge segregation during the growth of Si_{1 − x}Ge_x alloys (x = 5, 10, 20, and 40%) was studied using X-ray photoelectron spectroscopy. The alloys were grown in thicknesses up to 20.0 nm at 500°C to measure quantitatively the amount of segregated surface Ge. The length of alloy needed to reach steady-state growth edge was found to decrease with increasing alloy concentration (4.8, 2.8, 2.4, and 2.0 nm, respectively). It was found that each alloy had a complete monolayer of Ge on the surface and an increasing amount of segregated Ge in the second layer (20, 55, 80, and 95%, respectively) during steady-state growth. An increase in the temperature of alloy growth (400–750°C) resulted in an increase in the leading edge of alloy growth but did not change the amount of segregated Ge during steady-state growth. We propose that film stress is responsible for the amount of Ge segregation.     

Neural networks for prediction of acoustical properties of polyurethane foams

This paper presents a study of neural networks for prediction of acoustical properties of polyurethane foams. The proposed neural network model of the foam uses easily measured parameters such as frequency, airflow resistivity and density to predict multiple acoustical properties including the sound absorption coefficient and the surface impedance. Such a model is quite robust in the sense that it can be used to develop models for many different classes of materials with different sets of input and output parameters. The current neural network model of the foam is empirical and provides a useful complement to the existing analytical and numerical approaches.     

A beaker without walls: formation of deeply supercooled binary liquid solutions of alcohols from nanoscale amorphous solid films

Layered nanoscale amorphous solid films of methanol and ethanol undergo complete intermixing prior to the onset of measurable desorption at 120 K. This intermixing precedes and inhibits crystallization. Subsequent desorption of the film is described quantitatively by a kinetic model describing evaporation from a continuously mixed ideal binary liquid solution. This occurs at temperatures below the melting point of the binary mixture, indicating ideal behavior for the supercooled liquid solution. This approach provides a new method for preparing and examining deeply supercooled solutions.     

Emission spectrum of a dressed exciton-biexciton complex in a semiconductor quantum dot

The photoluminescence spectrum of a single quantum dot was recorded as a secondary resonant laser optically dressed either the vacuum-to-exciton or the exciton-to-biexciton transitions. High-resolution polarization-resolved measurements using a scanning Fabry-Pérot interferometer reveal splittings of the linearly polarized fine-structure states that are nondegenerate in an asymmetric quantum dot. These splittings manifest as either triplets or doublets and depend sensitively on laser intensity and detuning. Our approach realizes complete resonant control of a multiexcitonic system in emission, which can be either pulsed or continuous wave, and offers direct access to the emitted photons.