Spin crossover studies in tris(N,N′-dialkyldithiocarbamato)iron(III) complexes

A series of fifteen complexes of the type [Fe(RRNCS₂)₃] with symmetric (R=R=n- C₆H₁₃, n-C₈H₁₇, CH₂–CH=;CH₂, C₆H₅, C₆H₁₁ and C₆H₅CH₂), unsymmetric (R = CH₃; R = n-C₄H₉, C₆H₁₁, C₆H₅ and R = C₂H₅; R = n-C₄H₉, C₆H₁₁, C₆H₅ and i-C₃H₇) and ring substituents (RNR=pyrrolidyl and piperidyl) have been synthesized and their magnetic moments and Mössbauer spectra recorded from room temperature (RT) to liquid nitrogen temperature (LNT). Room temperature Mössbauer spectra of all the complexes exhibit an asymmetric doublet, which could be resolved into two doublets, each corresponding to low and high spin states in equilibrium. The crystal structure of tris(N, N-diallyldithiocarbamato)iron(III) shows it to be monoclinic with trigonally distorted octahedral geometry and space group C2/c. Fe–S stretching vibrations in the far i.r. region also show equilibria, HS LS. Depending on the nature of the alkyl group substituent, variable temperature magnetic moment and Mössbauer spectral studies, all the complexes may be divided into three groups; high spin complexes exhibiting spin-crossover (⁶A_1g ²T_2g), high spin complexes exhibiting spin transition (⁶A_1g ⁴T_1g) and intermediate spin complexes showing spin transition (⁴A_1g ²T_2g). On the basis of areas of the two doublets corresponding to high and low spin states, their percent contributions were calculated. Furthermore, magnetic moments of the equilibrium mixture calculated on the basis of respective areas compare well with the experimentally determined _eff values. E_Q values for both high and low spin states show linear decrease with increasing temperature.     

M?ssbauer and other spectral studies of Fe(III) complexes of benzothiazolines

Different molar reactions of Fe(OPr¹)₃, and FeCl₃ with benzothiazolines having an NSH donor system. derived by the condensation ofo-aminothiophenol with heterocyclic aldehydes. viz. pyridine-2-aldehyde. furfuraldehyde and thiophene-2-aldehyde. lead to the formation of [Fe.Pr¹(NS)₂]₂, [Fc(NS)₃] and [Fe(NS)₂Cl| type of complexes. The resulting derivatives have been characterized by elemental analysis, conductivity measurements, molecular weight determinations and magnetic studies. IR, electronic, M?ssbauer and ESR spectral data have been used to deduce the structures of the resulting derivatives.     

Mössbauer study of Brazilian soapstone

Steatite mineral rocks, soapstone, have been studied by X-ray diffraction, optical microscopic analysis (modal analysis), electron probe micro analysis and Mössbauer spectroscopy for characterization, mineral percentages and chemical composition. Mössbauer spectra show both, magnetic interactions corresponding to magnetite and doublets corresponding to talc. chlorite, dolomite and tremolite. The temperature dependence of the quadrupole splitting in dolomite has been explained in terms of crystal field interaction.     

Complexation behaviour of benzilmono(Iepidyl)hydrazone (BLH) toward bivalent metal ions: A potentiometric study

Potentiometric investigations on metal complexes of various bivalent metal ions, viz. UO₂(II), Cu(II), Ni(II), Co(II), Cd(II), Pb(II), Zn(II) and Mn(II) with benzilmonol(lepidy!)hydrazone (BLH) have been carried out at different ionic strengths and at different temperatures in order to determine stability constants of the complexes. Thermodynamic parameters ΔC, ΔH and ΔS have also been evaluated from temperature coefficient data. The effect of varying the dielectric constant of the medium on the stability constants of complexes has also been investigated at 30±0.5°C and μ = 0.1MNaCl. Thermodynamic stability constants and thermodynamic stabilization energies for the first transition metals have also been discussed.     

Cobalt(II) complexes of new biomimetic polydentate amide ligands. A spectroscopic,thermal and potentiometric study

Complexes of Co^II with N,N-bis-(3-carboxy-1-oxopropanyl)-1,2-ethylenediamine(L₁), N,N-bis-(3-carboxy-1-oxopropanyl)-1,2-phenylenediamine(L₂), N,N-bis-(2-carboxy-1-oxophenelenyl)-1,2-phenylenediamine(L₃) and N,N-bis-(3-carboxy-1-oxoprop-2-enyl)-1,2-phenylenediamine(L₄) have been prepared and characterized by elemental analysis, vibrational spectra, magnetic susceptibility measurements, electronic spectra and thermal studies. Stability constants of the complexes have been evaluated potentiometrically. Vibrational spectra indicate coordination of amide and carboxylate oxygens of the ligands along with two water molecules giving a MO₆ weak field octahedral chromophore. Electronic spectra support octahedral geometry around Co^II. The [Co(L₁)-(H₂O)₂] · 2H₂O complex has the maximum activation energy and [Co(L₃)(H₂O)₂] complex has the minimum activation energy. The order of stability constants of the Co^II complexes with various ligands is due to their -donor abilities.     

Rapid identification of trimethyl and triethyl amines using sulphonic acidic ionic liquids: A time-of-flight secondary ion mass spectrometry study of fragmentation reactions

The time-of-flight secondary ion mass spectrometry (TOF-SIMS) has emerged as a powerful tool for the unswerving detection of biomolecules, in particular, proteins and peptides. To date, there is very little information available on the direct determination of trimethyl/triethyl amines using TOF-SIMS. One major hurdle in this regard is an ultrahigh vacuum system, usually needed in TOF-SIMS, which hampers its usability to trimethyl/triethyl amines owing to their high evaporation rate. We designed an efficient and sensitive protocol for rapid identification and sensitive determination of tertiaryalkyl amines using TOF-SIMS. The amines were derivatized by reaction with 1,4-butane sultone and sulphuric acid sequentially to afford the corresponding sulphonic acidic ionic liquids (ILs). The TOF-SIMS analysis of these task-specific ILs (TSILs) was carried out in both positive and negative polarity. The positive ion mass spectra of TSILs showed sharp fragmented peaks for tertiaryalkyl amines at typical level and up to 10 ppm. The possible mechanism for different fragmentation pathways in positive polarity was discussed.     

Clickable polyurethanes based on s‐triazine ring containing aromatic diisocyanate bearing pendent alkyne group: Synthesis and postmodification

A new s‐triazine ring containing aromatic diisocyanate bearing a pendent alkyne group, namely, 2,4‐bis(4‐isocyanatophenoxy)?6‐(prop‐2‐yn‐1‐yloxy)?1,3,5‐triazine was synthesized and reacted with various diols viz., 1,10‐decanediol, tetraethylene glycol and polyethylene glycols in the presence of dibutyltin dilaurate as the catalyst to obtain a series of linear polyurethanes. The selected polyurethanes possessing pendent alkyne groups were postmodified with chemically diverse azides viz., 1‐(azidomethyl)benzene, 1‐(azidomethyl)pyrene, and methoxy end‐caped poly(ethylene glycol) azide via copper‐catalysed azide‐alkyne Huisgen 1,3‐dipolar cycloaddition. FTIR and ¹H NMR spectra indicated quantitative click reaction. UV–vis and fluorescence spectroscopic analysis confirmed complete incorporation of pyrenyl groups indicating the formation of fluorescence active polyurethane by postmodification with 1‐(azidomethyl)pyrene. TG analysis of polyurethanes indicated two stage weight loss and their thermal stability, as judged by T ₁₀ values, was governed by weight percent of urethane linkages. The water contact angle measurements revealed improved wettability with increased content of PEG either in the backbone of polyurethanes or as grafted chains. DLS and TEM studies confirmed that certain polyurethanes possessing PEG segments displayed self‐assembly in aqueous solution, which was further supported by pyrene encapsulation studies using UV–vis spectroscopy. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1008–1020     

QbD approached comparison of reaction mechanism in microwave synthesized gold nanoparticles and their superior catalytic role against hazardous nirto‐dye

Microwave irradiation (MI) process characteristically enables extremely rapid “in‐core” heating of dipoles and ions, in comparison to conventional thermal (conductance) process of heat transfer. During the process of nanoparticles synthesis, MI both modulates functionality behaviors as well as dynamic of reaction in favorable direction. So, MI providing a facile, favorable and alternative approach during nanoparticles synthesis nanoparticles with enhanced catalytic performances. Although, conventionally used reducing and capping reagents of synthetic origin, are usually environmentally hazardous and toxic for living organism. But, in absence of suitable capping agent; stability, shelf life and catalytic activity of metallic nanoparticles adversely affected. However, polymeric templates which emerged as suitable choice of agent for both reducing and capping purposes; bearing additional advantages in terms of catalyst free one step green synthesis process with high degree of biosafety and efficiency. Another aspect of current works was to understand role of process variables in growth mechanism and catalytic performances of microwave processed metallic nanoparticles, as well as comparison of these parameters with conventional heating method. However, due to poor prediction ability with previously published architect OFAT (One factor at a time) design with these nanoparticles as well as random selection of process variables with their different levels, such comparison couldn't be possible. Hence, using gum Ghatti (Anogeissus latifolia) as a model bio‐template and under simulated reaction conditions; architect of QbD design systems were integrated in microwave processed nanoparticles to establish mechanistic role these variables. Furthermore, in comparison to conventional heating; we reported well validated mathematical modeling of process variables on characteristic of nanoparticles as well as synthesized gold nanoparticles of desired and identical dimensions, in both thermal and microwave‐based processes. Interestingly, despite of identical dimension, MI processed gold nanoparticles bearing higher efficiency (kinetic rate) against remediation of hazardous nitro dye (4‐nitrophenol), into safer amino (4‐aminophenol) analogues.