Quasiliving Carbocationic Polymerization. XV. Forced Ideal Copolymerization of Isobutylene-lsoprene

Forced ideal carbocationic copolymerization of isobutylene and isoprene has been achieved by continuous addition of monomer mixtures of different compositions to cumyl chloride/TiCl₄ charges at -50°C. The overall rate of copolymerization could be kept equal to that of addition rate with up to 10 mol% isoprene in the mixed monomer feed. In this monomer concentration range the composition of the copolymer was identical to that of the feeds. At higher diene concentrations in the feed, chain transfer to monomer and other side reactions (intramolecular cyclization, gel formation) could not be completely avoided. The number-average molecular weight of the copolymers increased almost linearly with the amount of consumed monomers at 10 mol% isoprene concentrations in the feed (i.e., in the quasiliving range). According to ¹H-NMR and ¹³C-NMR spectroscopy, the products are random copolymers.     

Contributions to the Mechanism of Isobutene Polymerization. VII. Effect of HCI and Chloroethyl Benzene and a Brief Summary of the Data

Der Einfluss von HCI und Chloräthylbenzol auf die Ausbeute und das Molekulargewicht von Polyisobutylen wurde untersucht. Es konnten keine sinnvollen Vergiftungs-und Übetrträgerkoeffizienten abgeleitet werden da HC1 als ausbeuteverbessernder Promotor wirkte und der Einfluss des Chloräthylbenzols sich als sehr komplex erwies. Die Molekulargewichte der Polyisobutylene waren geringer, je grösser die Menge der vorhandenen Halogenverbindungen war. Es wird postuliert, dass HC1 als Promotor und Überträger wirkt.

Die in dieser Untersuchungsreihe erhaltenen Ergebnisse wurden durch Auftragung des Vergiftungskoeffizienten jeder Verbindung gegen den ëbertragungskoeffizienten dargestellt. Die meisten der untersuchten Ver-bindungen sind sowohl Gifte als auch ëbertràger, nur wenige sind reine (oder fast reine) Gifte oder Ubertràger. Es wird betont, dass diese Eigen-schaften rein empirisch sind und dass diese Ergebnisse nur mit grösster Vorsicht verallgemeinert werden dürdrfen.     

Contributions to the Mechanism of Isobutene Polymerization. VI. Effect of Halides

The effects of various allyl chlorides and alkyl halides on the overall yield of polymerization and molecular weight of polyisobutene have been investigated and expressed quantitatively by poison and transfer coefficients. The poison and transfer coefficients of halides have been compared with those obtained previously for corresponding hydorcarbons. The poison coefficients of halides and hydrocarbons can be treated formally in a similar manner (1/W_p vs. [X] plots linear for both classes); however, the appropriate transfer coefficients indicate fundamentally dissimilar transfer mechanisms in these systems (1/MW_p vs. [X] plots linear for hydrocarbons, whereas 1/MW_p vs. [X]^1/2 plots linear for halides). These results are discussed in terms of the allylic termination mechanism.     

Olefin Polymerizations and Copolymerizations with Aluminum Alkyl-Cocatalyst Systems. V. The Molecular Weight and Molecular Weight Distribution of Polystyrene

Abstract

The polymerization of styrene with the cationic initiator system AlR₂Cl/RCl was investigated further. Earlier conclusions [1] were corroborated and expanded by an analysis of the number and weight average molecular weights. Alkyl halides with low (high) R?Cl bond dissociation energies are efficient (poor) coinitiators of the polymerization of styrene. In the presence of efficient RCl coinitiators, the molecular weights strongly decrease and the molecular weight distributions strongly increase with increasing conversions (Fig. 1). With poor cointiators, only low conversions are obtained even in the presence of large amounts of AlEt₂Cl. The data are discussed in terms of a previously proposed mechanism [1].     

Living Carbocationic Polymerization. XLIX. Two-Stage Living Polymerization of Isobutylene to Di-tert-chlorine Telechelic Polyisobutylene

Abstract

A two-stage process was developed for the living polymerization of isobutylene (IB) employing di-tert-alcohol initiators in conjunction with BCl₃ coinitiator in the first or initiation stage, followed by TiCl₄ coinitiator in the second or propagation stage; the process was shown to yield high molecular weight (up to M ⁿ 20,000), narrow molecular weight distribution (MWD) M ^w/M ⁿ = 1.1–1.2) di-tert-chlorine telechelic polyisobutylenes (^tCl-PIB-Cl^t). The initiation stage involves the homogeneous solution living polymerization of IB induced by the di-tert-alcohol/BCl₃ combination in the presence of an electron donor such as N,N-dimethylacetamide in CH₃Cl solvent at ?80°C and proceeds up to M ⁿ < 5000; this is followed by the propagation stage in which TiCl₄ and the bulk of IB plus a sufficient amount of n-C₆H₁₄ are added to the charge to bring the solvent composition to CH₃Cl/n-C₆H₁₄ 60/40 v/v and the living polymerization is continued until high M ⁿ product is obtained. This two-stage process was developed because 1) it employs very inexpensive chemicals; 2) di-tert-alcohol/BCl₃ combinations initiate living IB polymerization in CH₃Cl but the product after reaching M ⁿ ≤ 5000 precipitates out of the CH₃Cl solution, and di-tert-alcohol/BCl₄ combinations do not initiate IB polymerization; and 3) di-tert-alcohol/BCl₃ systems do not initiate (or only very slowly) the living polymerization of IB in CH₃Cl/n-C₆H₁₄ mixtures, whereas similar TiCl₄-based systems do. The polymerization remains living during both stages although the propagating species and solvent polarity are profoundly altered. The livingness of the system has been analyzed by kinetic experiments and the structure of the ^tCl-PIB-Cl^t product by routine spectroscopic means.     

Living Carbocationic Polymerization. XXIII. Analysis of Slow Initiation in Living Isobutylene Polymerization

The aim of this research was to develop a quantitative treatment of the consequences of relatively slow initiation on M _n and N (the number of molecules formed, W_p/M _n , where W_p =weight of polymer formed) in living carbocationic polymerizations, particularly for the case of the incremental monomer addition (IMA) technique. This has been achieved by analysis of the effect of initiator efficiency (I_eff (%) = 100N/[I ₀], where [I ₀] = initiator input) on M _n versus W_p , and N versus W_p plots. Three types of systems have been discerned: 1) I_eff equal to 100%; 2) I_eff constant but less than 100%; and 3) I_eff less than 100% but increasing with increasing number of monomer increments j by the IMA technique. Thus conditions can be found under which slowly initiating systems yield close to “ideal” product, i.e., one with M _n = [M₀ ]/[I₀ ] and narrow molecular weight distribution (M _w /M _n ≈ 1.1). The corresponding equations and plots can be used to diagnose the mechanism. Subsequently, this quantitative analysis was used to describe a novel living system, trans‐2,5‐diacetoxy‐2,5‐dimethyl‐3‐hexene (DiOAcDMH₆)/BCI₃/isobutylene/CH₃CI. This system produces linear t‐chlorine‐telechelic polyisobutylenes under homogeneous conditions. Surprisingly, cationation seems to be rate determining. This conclusion is illustrated by chemical equations.     

Living Carbocationic Polymerization. LII. Living Carbocationic Copolymerization of Indene and p-Methylstyrene. 2. Synthesis,Characterization, and Physical Properties of Poly((Indene-co-p-Methylstyrene)-b-Isobutylene-b-(Indene-co-p-Methylstyrene)) Thermoplastic Elastomers

Abstract

Novel thermoplastic elastomers (TPEs) consisting of a central rubbery polyisobutylene (PIB) segment flanked by two glassy outer segments comprising indene (Ind)-co-p-methylstyrene (pMeSt) random copolymers have been prepared. The synthesis was effected by sequential monomer addition in one reactor: The process starts by the biliving homopolymerization of isobutylene (IB) and yields the living dication ⁺PIB⁺; the latter, upon the introduction of Ind/pMeSt mixtures, induces the living copolymerization of these monomers and yields the target TPE P(Ind-co-pMeSt)-b-PIB-b-P(Ind-co-pMeSt) triblock. The length of the rubbery midblock and the composition of the Ind-co-pMeSt random copolymer outer blocks (i.e., the overall composition of the triblocks) can be readily controlled. The glass transition temperature (T_g ) of the outer blocks can be fine-tuned by controlling the relative Ind/ pMeSt composition. The triblocks are excellent TPEs; for example, a P(Ind-co-pMeSt)-b-PIB-b-P(Ind-co-pMeSt) of M _n ≈ 115,000 g/mol containing a PIB midblock of M _n ≈ 70,200 g/mol and glassy copolymer outer blocks of P(Ind-co-pMeSt) [Ind/pMeSt = 41/59 (w/w)] exhibited 23.4 MPa tensile strength and 460% elongation. Tensile strengths and 300% moduli increase with the relative amount of the glassy segment present. Hardness increases with increasing Ind content.     

The Synthesis of Poly(Dimethylsiloxane-b-Isobutylene-b-Dimethylsiloxane) and Poly-(Dimethylsiloxane-b-Isobutylene-b-Dimethylsiloxane) from Alcohol-Telechelic Polyisobutylenes

The purpose of these studies was to combine polydimethylsiloxane (PDMS) and polyisobutylene (PIB) sequences into novel triblock, PDMS-b-PIB-b-PDMS, and multiblock, (-PDMS-b-PIB-b-PDMS-)n, copolymers. The key toward syntheses was the definition of conditions for the initiation of living anionic polymerization of hexamethyl-cyclotrisiloxane (D₃) at the CH₂OLi termini of well-defined tele-chelic PIB sequences. Subsequent deactivation of living D₃ polymerization charges with Me₃ SiCl yielded the target triblock whereas stoichiometric amounts of Me₂ SiCl₂ gave the multiblock copolymer.     

Living Carbocationic Polymerization. VII. Living Polymerization of Isobutylene by Tertiary Alkyl (or Aryl) Methyl Ether/Boron Trichloride Complexes

Abstract

Colloidal palladium supported on a chelate resin containing iminodiacetic acid groups was prepared by refluxing the palladium chelate resin in methanol-water. Using the resin-supported colloidal palladium as a catalyst, cyclopentadiene was hydrogenated to cyclopentene in 97.1% selectivity at 100% conversion of cyclopentadiene under 1 atm of hydrogen in methanol at 30°C. Finely dispersed metal particles ranging from 10 to 60 Å in diameter were observed in the resin by electron microscopy. Both x-ray microanalysis for palladium and elution analysis of palladium ion with an aqueous solution of ethylenediaminetetraacetic acid disodium salt demonstrated the existence of large amounts of palladium ion complexes in the resin. The amount of palladium metal in the resin was estimated to be about 5% of the total palladium. Since the resin, after removal of most of the ionic palladium, exhibited almost the same catalytic activity as before, it was concluded that the finely dispersed metal particles are the active species in the catalyst.     

Influence of the Metal Ion on the Two‐Photon Absorption Properties of Lanthanide Complexes Including Near‐IR Emitters

The synthesis of tris(2‐thenoyltrifluoroacetonate)lanthanide(III) complexes featuring a diethylaminostyryl‐2,2′‐bipyridine coligand was achieved for lanthanum; the near‐infrared (NIR) emitters neodymium, erbium, and ytterbium; and the transition‐metal yttrium. The photophysical properties were thoroughly studied, and it was demonstrated that the conjugated bipyridine ligand acts as a good antenna for the sensitization of the NIR emitters. The two‐photon absorption (TPA) properties of all five complexes were investigated by using both two‐photon excited fluorescence and the Z‐scan method. We demonstrate that the nature of the rare earth ion has almost no influence on the TPA properties centered on the conjugated bipyridyl ligand. Finally, we show that Yb^III is sensitized by a two‐photon antenna effect, and that Nd^III is mostly sensitized by a one‐photon process involving direct excitation of forbidden f–f transitions.