Upstream porthole injection in a 2-D scramjet model

Injection from portholes upstream of the combustion chamber was investigated as a method of delivering fuel into a scramjet. This method reduces the viscous drag on a model by allowing a reduction in the length of the combustion chamber. At experimental enthalpies of 3.0 MJ/kg in the T4 shock tunnel, there was no evidence of combustion in the intake, either by shadowgraph or pressure measurements. Combustion was observed in the combustion chamber. A theoretical extension of these results is made to a hot wall scenario. Received 2 January 2001 / Accepted 3 August 2001     

Isolation of Elusive HAsAsH in a Crystalline Diuranium(IV) Complex

The HAsAsH molecule has hitherto only been proposed tentatively as a short‐lived species generated in electrochemical or microwave‐plasma experiments. After two centuries of inconclusive or disproven claims of HAsAsH formation in the condensed phase, we report the isolation and structural authentication of HAsAsH in the diuranium(IV) complex [{U(Tren^TIPS)}₂(μ‐η²:η²‐As₂H₂)] ( 3 , Tren^TIPS=N(CH₂CH₂NSiPrⁱ₃)₃; Prⁱ=CH(CH₃)₂). Complex 3 was prepared by deprotonation and oxidative homocoupling of an arsenide precursor. Characterization and computational data are consistent with back‐bonding‐type interactions from uranium to the HAsAsH π*‐orbital. This experimentally confirms the theoretically predicted excellent π‐acceptor character of HAsAsH, and is tantamount to full reduction to the diarsane‐1,2‐diide form.     

Thermal Analysis of Micro- and Nano-Lignocellulosic Reinforced Styrene Maleic Anhydride Composite Foams

The aim of this study was to measure the thermal properties of foamed nano/macro filler–reinforced styrene maleic anhydride (SMA) composites. SMA (66%) as a polymer matrix (10% maleic anhydride content) and various fillers including wood flour, starch, α-cellulose, microcrystalline cellulose and cellulose nanofibrils as reinforcing agents (30%) and lubricant (4%) were used to manufacture the composites in a twin-screw extruder. According to the thermogravimetric analysis (TGA) results, thermal degradation of all the foamed composites was found to be lower than that of SMA composites. The storage modulus values were negatively affected with a second time foaming (reprocessing [recycling] the initially processed composites a second time), as were loss modulus and T_g. As a result, second-time-foamed composite modulus values were lower than those of the foamed composites. According to the melt flow index (MFI) results, viscosity of the SMA was found to increase with the addition of fillers.     

Preparation and property assessment of neat lignocellulose nanofibrils (LCNF) and their composite films

Lignocellulose nanofibrils (LCNF) were produced from thermo-mechanical pulp (TMP) using a micro-grinder and were characterized with respect to fiber diameter and thermal stability. The initial water content in the TMP affected the defibrillation process and longer grinding time was necessary for the air-dried TMP, resulting in LCNF with higher fibril diameter. As compared to the reference cellulose nanofibrils (CNF) produced through a refining process, LCNF was less thermally stable and started to degrade at a temperature that was 30 °C lower than that of CNF. LCNF obtained from the never-dried TMP was combined with various additives (10 wt%) to produce composite films. The neat LCNF and composite films did not reach the mechanical properties of the neat CNF film that was evaluated as reference. However, the addition of poly(vinyl alcohol) (PVA) at 10 wt% on a dry basis did cause a 46 and 25% increase in tensile strength and elastic modulus, respectively. Other additives including cellulose nanocrystals, bentonite and CNF were also found to increase to some extent the Young’s modulus and ductility of the LCNF composite films whereas the addition of talc did not improve the film performance. Water absorption of neat LCNF films was lower than the reference CNF and was negatively affected by the addition of PVA.     

The nature of unsupported uranium-ruthenium bonds: a combined experimental and theoretical study

Four new uranium-ruthenium complexes, [(Tren(TMS))URu(η(5)-C(5)H(5))(CO)(2)] (9), [(Tren(DMSB))URu(η(5)-C(5)H(5))(CO)(2)] (10), [(Ts(Tolyl))(THF)URu(η(5)-C(5)H(5))(CO)(2)] (11), and [(Ts(Xylyl))(THF)URu(η(5)-C(5)H(5))(CO)(2)] (12) [Tren(TMS)=N(CH(2)CH(2)NSiMe(3))(3); Tren(DMSB)=N(CH(2)CH(2)NSiMe(2)tBu)(3)]; Ts(Tolyl)=HC(SiMe(2)NC(6)H(4)-4-Me)(3); Ts(Xylyl)=HC(SiMe(2)NC(6)H(3)-3,5-Me(2))(3)], were prepared by a salt-elimination strategy. Structural, spectroscopic, and computational analyses of 9-12 shows: i) the formation of unsupported uranium-ruthenium bonds with no isocarbonyl linkages in the solid state; ii) ruthenium-carbonyl backbonding in the [Ru(η(5)-C(5)H(5))(CO)(2)](-) ions that is tempered by polarization of charge within the ruthenium fragments towards uranium; iii) closed-shell uranium-ruthenium interactions that can be classified as predominantly ionic with little covalent character. Comparison of the calculated U-Ru bond interaction energies (BIEs) of 9-12 with the BIE of [(η(5)-C(5)H(5))(3)URu(η(5)-C(5)H(5))(CO)(2)], for which an experimentally determined U-Ru bond disruption enthalpy (BDE) has been reported, suggests BDEs of approximately 150 kJ mol(-1) for 9-12.     

Synchrotron FTIR analysis of drug treated ovarian A2780 cells: an ability to differentiate cell response to different drugs?

Recently a new di-gold(I) organometallic complex [1,3-(Ph(3)PAu)(2)-C(6)H(4)] (KF0101) has been synthesised and found to exhibit cytotoxic activity in vitro. Subsequently it has been demonstrated that KF0101 shows little or no cross-resistance against a number of the cisplatin resistant ovarian cancer cell lines in vitro suggesting a different mode of action for the drug. In this study, syncrotron radiation infrared microspectroscopy (SR-IRMS) has been used on drug treated single A2780 cells in order to determine if this different mode of action can be identified spectroscopically. The aim of the study was to establish: (i) if single cell SR-IRMS could be used to give insight into the cellular response on treatment with different cytotoxic agents relative to non-treated cells (control) and (ii) that if the cytotoxic drugs elicit a different biochemical response these responses could be distinguished from each other. The most striking features obtained after Principal Components Analysis (PCA) of Resonant Mie Scattering (RMieS) corrected single cell spectra of drug treated ovarian A2780 cells are: (i) The spectra obtained for the control are quite heterogeneous and several hundred spectra are required to adequately define the nature of the control; (ii) after drug treatment at the IC50 level for 24 h with cisplatin, KF0101, methotrexate, paclitaxel or 5-fluorouracil the cell spectra, as represented on a PCA scores plot, generally concentrate in certain well defined areas of the control, there are however a small number of spectra that fall outside of the area defined by the control; and (iii) a differentiation between cell spectra obtained on treatment with different drugs is observed which fits well with different in vitro cell culture behaviour and a flow cytometry cell cycle analysis of the control and drug treated cells. Inspection of the loading plots shows that PC1 is essentially the same for all plots and reflects changes in cell biochemistry related to the cell cycle. PC2, however, on comparison of the control versus cisplatin or cisplatin versus KF0101 is indicative of differences induced by drug treatment and has been termed as cell cycle-plus behaviour. These data are shown to be consistent with that obtained using bench-top IRMS by averaging a number of single cell spectra and carrying out a PCA, but SR-IRMS offers more insight into how the drug is affecting the cell population. More importantly, this approach enables the influence of the cell cycle on both the control and drug treated samples to be taken into consideration when evaluating the drug-cell interaction.     

Halide, amide, cationic, manganese carbonylate, and oxide derivatives of triamidosilylamine uranium complexes

Treatment of the complex [U(Tren(TMS))(Cl)(THF)] [1, Tren(TMS) = N(CH(2)CH(2)NSiMe(3))(3)] with Me(3)SiI at room temperature afforded known crystalline [U(Tren(TMS))(I)(THF)] (2), which is reported as a new polymorph. Sublimation of 2 at 160 °C and 10(-6) mmHg afforded the solvent-free dimer complex [{U(Tren(TMS))(μ-I)}(2)] (3), which crystallizes in two polymorphic forms. During routine preparations of 1, an additional complex identified as [U(Cl)(5)(THF)][Li(THF)(4)] (4) was isolated in very low yield due to the presence of a slight excess of [U(Cl)(4)(THF)(3)] in one batch. Reaction of 1 with one equivalent of lithium dicyclohexylamide or bis(trimethylsilyl)amide gave the corresponding amide complexes [U(Tren(TMS))(NR(2))] (5, R = cyclohexyl; 6, R = trimethylsilyl), which both afforded the cationic, separated ion pair complex [U(Tren(TMS))(THF)(2)][BPh(4)] (7) following treatment of the respective amides with Et(3)NH·BPh(4). The analogous reaction of 5 with Et(3)NH·BAr(f)(4) [Ar(f) = C(6)H(3)-3,5-(CF(3))(2)] afforded, following addition of 1 to give a crystallizable compound, the cationic, separated ion pair complex [{U(Tren(TMS))(THF)}(2)(μ-Cl)][BAr(f)(4)] (8). Reaction of 7 with K[Mn(CO)(5)] or 5 or 6 with [HMn(CO)(5)] in THF afforded [U(Tren(TMS))(THF)(μ-OC)Mn(CO)(4)] (9); when these reactions were repeated in the presence of 1,2-dimethoxyethane (DME), the separated ion pair [U(Tren(TMS))(DME)][Mn(CO)(5)] (10) was isolated instead. Reaction of 5 with [HMn(CO)(5)] in toluene afforded [{U(Tren(TMS))(μ-OC)(2)Mn(CO)(3)}(2)] (11). Similarly, reaction of the cyclometalated complex [U{N(CH(2)CH(2)NSiMe(2)Bu(t))(2)(CH(2)CH(2)NSiMeBu(t)CH(2))}] with [HMn(CO)(5)] gave [{U(Tren(DMSB))(μ-OC)(2)Mn(CO)(3)}(2)] [12, Tren(DMSB) = N(CH(2)CH(2)NSiMe(2)Bu(t))(3)]. Attempts to prepare the manganocene derivative [U(Tren(TMS))MnCp(2)] from 7 and K[MnCp(2)] were unsuccessful and resulted in formation of [{U(Tren(TMS))}(2)(μ-O)] (13) and [MnCp(2)]. Complexes 3-13 have been characterized by X-ray crystallography, (1)H NMR spectroscopy, FTIR spectroscopy, Evans method magnetic moment, and CHN microanalyses.