Cellulose nanofibril (CNF) reinforced starch insulating foams

In this study, biodegradable foams were produced using cellulose nanofibrils (CNFs) and starch (S). The availability of high volumes of CNFs at lower costs is rapidly progressing with advances in pilot-scale and commercial facilities. The foams were produced using a freeze-drying process with CNF/S water suspensions ranging from 1 to 7.5 wt% solids content. Microscopic evaluation showed that the foams have a microcellular structure and that the foam walls are covered with CNF’s. The CNF’s had diameters ranging from 30 to 100 nm. Pore sizes within the foam walls ranged from 20 to 100 nm. The materials’ densities ranging from 0.012 to 0.082 g/cm³ with corresponding porosities between 93.46 and 99.10 %. Thermal conductivity ranged from 0.041 to 0.054 W/m-K. The mechanical performance of the foams produced from the starch control was extremely low and the material was very friable. The addition of CNF’s to starch was required to produce foams, which exhibited structural integrity. The mechanical properties of materials were positively correlated with solids content and CNF/S ratios. The mechanical and thermal properties for the foams produced in this study appear promising for applications such as insulation and packaging.     

A high statistics measurement of the Lambda(+)(c) lifetime

A high statistics measurement of the Lambda(+)(c) lifetime from the Fermilab fixed-target FOCUS photoproduction experiment is presented. We describe the analysis technique with particular attention to the determination of the systematic uncertainty. The measured value of 204.6 +/- 3.4 (stat) +/- 2.5 (syst) fs from 8034 +/- 122 Lambda(+)(c)-->pK(-)pi(+) decays represents a significant improvement over the present world average.     

Solvent-dependent stabilization of the E configuration of propargylic secondary amides

Secondary amides typically exist 98-99% in the Z rotamer to avoid steric repulsion between the substituent on the carbonyl carbon and the nitrogen. In contrast, secondary amide 3a displays 24% E rotamer at room temperature in aqueous solution. The analogous ester displays 6% E rotamer in chloroform, which suggests that the relatively high E conformer population observed for 3a in water results in part from the low steric bulk of the sp-hybridized carbons and in part from the hydrophobic effect.     

Solution conformational preferences of glutaric, 3‐hydroxyglutaric, 3‐methylglutaric acid,and their mono‐ and dianions

Conformational preferences of glutaric, 3‐hydroxyglutaric and 3‐methylglutaric acid, and their mono‐ and dianions have been investigated with the aid of NMR spectroscopy. In contrast to succinic acid, glutaric acid displays essentially statistical conformational equilibria in polar and non‐polar solutions of high and low hydrogen‐bonding ability with no clear evidence for intramolecular hydrogen‐bonding interactions. The acid ionization constant ratios, K ₁/K₂, in D₂O and DMSO of glutaric, 3‐hydroxyglutaric, and 3‐methylglutaric acids also indicate that intramolecular interactions are much less important than, or indeed insignificant, for shorter‐chain acids. FTIR studies on 3‐methylglutaric acid indicate some preference for either association with solvent or dimerization, depending on the solvent, rather than intramolecular hydrogen bonding. Copyright © 2008 John Wiley & Sons, Ltd.     

A high temperature Mössbauer effect study of iron-doped YBa2Cu3O7 superconductor

Superconducting YBa₂Cu_2.955Fe_0.045O₇ has been studied at temperatures between 300 and 1000 K. Spectra were recorded on a sample which was sealed as a pellet pressed with boron nitride. An atmosphere of oxygen was maintained in the sample region at all times. At temperatures up to 900 K, we observed the four iron sites A, (Cu(1) chain-site; square planar oxygen coordination with O(5) vacancy on thea-axis), B, (Cu(2) plane-site; square pyramidal oxygen coordination), C, (Cu(1) chain-site; square pyramidal oxygen coordination with O(5) site occupied) and D, (Cu(1) chain-site; quasi-tetrahedral oxygen coordination with O(4) vacancy along theb-axis). At temperatures up to 700 K, the relative area of the B and C sites remained nearly constant as the temperature was increased. However, the area of the A site decreased while, the D site area increased with increasing temperature. At all times, the total area of sites A and D remained constant, thereby indicating the possibility of oxygen atom hopping in thea-b plane. The quadrupole splitting of each site, except the B site, decreased linearly with increasing temperature.Research supported in part by the Old Dominion University Undergraduate Research Program.     

The dynamics of ring rotation in ferrocene,nickelocene and ruthenocene by incoherent quadi-elastic neutron scattering

Incoherent quasi-elastic neutron scattering has been used to study the reorientational motions of the cyclopentadienyl rings in ferrocene, nickelocene and ruthenocene. The results for ferrocene show that the activation energy for ring rotation drops above the 164 K phase transition to 4.4 ± 0.5 kJ mol^?1 (which is approximately half its low temperature value) but the rings still appear to jump between only five orientations on the observable time scale. At room temperature, the rings in nickelocene appear to behave the same as in ferrocene but in ruthenocene they reorientate much less frequently and resemble those in ferrocene below 164 K.     

Short-team stability of trace metals in estuarine water samples

The short-term (up to 24 h) stability of estuarine water with high (22%?) and low (<21%?) salinity, stored unacidified in polythene containers prior to filtration, preservation and determination of dissolved trace metals, was assessed. For the-salinity sample a massive (140%) increase in copper concentration was observed, indicating desorption from the particulate phase; a similar, although less pronounced (11%) effect was found for the high-salinity sample, Evidence was also obtained for a significant loss (30%) of lead from a pre-filtered low-salinity sample, suggesting appreciable adsorption to the container walls. For cadmium and nickel, no substantial changes in concentration were observed.     

Synthesis of des-n-tetramethyltriostin a from C-terminal Z-d-serine tetra-and octadepsipeptide intermediates

Des-N-tetramethyltriostin A (1), a known DNA-intercalation agent, has been synthesized from tetra- and octapeptide intermediates that have Z-d-serine at the C-terminal position. The procedure thus allows the fragment coupling and cyclization reactions leading to the synthesis of the title compound to occur without racemization at the C-terminal amino acid. Esterification of Boc-Val-OH with the p-bromophenacyl ester of Z-d-serine provided didepsipeptide Z-d-Ser(Boc-Val)-OBpa (4). Stepwise addition of the requisite amino acids provided tetradepsipeptide Z-d-Ser[Boc-Ala-Cys(Acm)-Val]-OBpa (6). Fragment coupling of the respective C- and N-deprotected tetradepsipeptides 7 and 8, derived from 6, furnished linear octadepsipeptide 9, which upon cyclization and disulfide formation gave the bicyclic octadepsipeptide 11, a known synthetic precursor to 1. The degree of racemization incurred in the alanine and valine residues of selected depsipeptides was measured and the results compared with those obtained in previous studies. It was concluded that alanine, perhaps because of sequence effects, undergoes a degree of racemization (4–10%) during hydrolysis of tetradepsipeptide 6 and octadepsipeptide 9.     

Instantaneous frequency decomposition: an application to spectrally sparse sounds with fast frequency modulations

Classical time-frequency analysis is based on the amplitude responses of bandpass filters, discarding phase information. Instantaneous frequency analysis, in contrast, is based on the derivatives of these phases. This method of frequency calculation is of interest for its high precision and for reasons of similarity to cochlear encoding of sound. This article describes a methodology for high resolution analysis of sparse sounds, based on instantaneous frequencies. In this method, a comparison between tonotopic and instantaneous frequency information is introduced to select filter positions that are well matched to the signal. Second, a cross-check that compares frequency estimates from neighboring channels is used to optimize filter bandwidth, and to signal the quality of the analysis. These cross-checks lead to an optimal time-frequency representation without requiring any prior information about the signal. When applied to a signal that is sufficiently sparse, the method decomposes the signal into separate time-frequency contours that are tracked with high precision. Alternatively, if the signal is spectrally too dense, neighboring channels generate inconsistent estimates-a feature that allows the method to assess its own validity in particular contexts. Similar optimization principles may be present in cochlear encoding.     

Novel coexistence of superconductivity with two distinct magnetic orders

The heavy fermion system exhibits properties that range from an incommensurate antiferromagnet for small to an exotic superconductor on the Ir-rich end of the phase diagram. At intermediate where antiferromagnetism coexists with superconductivity, two types of magnetic order are observed: the incommensurate one of and a new, commensurate antiferromagnetism that orders separately. The coexistence of -electron superconductivity with two distinct -electron magnetic orders is unique among unconventional superconductors, adding a new variety to the usual coexistence found in magnetic superconductors.