Enhanced reactivity of nanoscale iron particles through a vacuum annealing process

A reactivity study was undertaken to compare and assess the rate of dechlorination of chlorinated aliphatic hydrocarbons (CAHs) by annealed and non-annealed nanoscale iron particles. The current study aims to resolve the uncertainties in recently published work studying the effect of the annealing process on the reduction capability of nanoscale Fe particles. Comparison of the normalized rate constants (m²/h/L) obtained for dechlorination reactions of trichloroethene (TCE) and cis-1,2-dichloroethene (cis-1,2-DCE) indicated that annealing nanoscale Fe particles increases their reactivity ~30-fold. An electron transfer reaction mechanism for both types of nanoscale particles was found to be responsible for CAH dechlorination, rather than a reduction reaction by activated H₂ on the particle surface (i.e., hydrogenation, hydrogenolysis). Surface analysis of the particulate material using X-ray diffraction (XRD) and transmission electron microscopy (TEM) together with surface area measurement by Brunauer, Emmett, Teller (BET) indicate that the vacuum annealing process decreases the surface area and increases crystallinity. BET surface area analysis recorded a decrease in nanoscale Fe particle surface area from 19.0 to 4.8 m²/g and crystallite dimensions inside the particle increased from 8.7 to 18.2 nm as a result of annealing.     

Synthesis of mixed cyclotriveratrylenes

Cyclotriveratrylenes containing one benzene ring and two indole rings linked through N1 and C2 can be prepared by acid-catalysed reactions of formaldehyde and aryl aldehydes with 1,2-di-(1-indolylmethyl)benzene compounds.     

UV light‐mediated alkylation of inorganic selenium

In the presence of low molecular weight organic acids (formic, acetic, propionic and malonic), inorganic selenium(IV) is converted by UV irradiation to volatile selenium carbonyl, dimethylselenide and diethylselenide, depending on the acid used. Gas chromatography–mass spectrometry analysis of the volatile products shows that, in 0.7 M formic acid solution, approximately 60–70% (v/v) SeH₂ and 30–40% (v/v) SeCO are formed. The presence of nitrate ion appears to increase threefold the formation of SeCO while completely suppressing formation of SeH₂. Copyright © 2003 Crown in the right of Canada. Published by John Wiley & Sons, Ltd.     

Upstream porthole injection in a 2-D scramjet model

Injection from portholes upstream of the combustion chamber was investigated as a method of delivering fuel into a scramjet. This method reduces the viscous drag on a model by allowing a reduction in the length of the combustion chamber. At experimental enthalpies of 3.0 MJ/kg in the T4 shock tunnel, there was no evidence of combustion in the intake, either by shadowgraph or pressure measurements. Combustion was observed in the combustion chamber. A theoretical extension of these results is made to a hot wall scenario. Received 2 January 2001 / Accepted 3 August 2001     

Isolation of Elusive HAsAsH in a Crystalline Diuranium(IV) Complex

The HAsAsH molecule has hitherto only been proposed tentatively as a short‐lived species generated in electrochemical or microwave‐plasma experiments. After two centuries of inconclusive or disproven claims of HAsAsH formation in the condensed phase, we report the isolation and structural authentication of HAsAsH in the diuranium(IV) complex [{U(Tren^TIPS)}₂(μ‐η²:η²‐As₂H₂)] ( 3 , Tren^TIPS=N(CH₂CH₂NSiPrⁱ₃)₃; Prⁱ=CH(CH₃)₂). Complex 3 was prepared by deprotonation and oxidative homocoupling of an arsenide precursor. Characterization and computational data are consistent with back‐bonding‐type interactions from uranium to the HAsAsH π*‐orbital. This experimentally confirms the theoretically predicted excellent π‐acceptor character of HAsAsH, and is tantamount to full reduction to the diarsane‐1,2‐diide form.     

Thermal Analysis of Micro- and Nano-Lignocellulosic Reinforced Styrene Maleic Anhydride Composite Foams

The aim of this study was to measure the thermal properties of foamed nano/macro filler–reinforced styrene maleic anhydride (SMA) composites. SMA (66%) as a polymer matrix (10% maleic anhydride content) and various fillers including wood flour, starch, α-cellulose, microcrystalline cellulose and cellulose nanofibrils as reinforcing agents (30%) and lubricant (4%) were used to manufacture the composites in a twin-screw extruder. According to the thermogravimetric analysis (TGA) results, thermal degradation of all the foamed composites was found to be lower than that of SMA composites. The storage modulus values were negatively affected with a second time foaming (reprocessing [recycling] the initially processed composites a second time), as were loss modulus and T_g. As a result, second-time-foamed composite modulus values were lower than those of the foamed composites. According to the melt flow index (MFI) results, viscosity of the SMA was found to increase with the addition of fillers.