Contractive Approximations in Risk-Sensitive Average Semi-Markov Decision Chains on a Finite State Space

Journal of Optimization Theory and Applications - This work concerns with semi-Markov decision chains evolving on a finite state space. The controller has a positive and constant risk sensitivity...     

The Photobiological Differences of Gilvocarcins V and M Are not Related to their Transient Intermediates and Triplet Yields

Abstract— The transient absorption spectra of the intermediates produced by the 355 nm laser excitation of gilvocarcin derivatives have been investigated in various solvents. The spectra consist of a triplet-triplet absorption in the visible region and a residual absorption observed between 340 and 700 nm due to a long-lived species, assigned to the radical cation. A broad-fast decaying band with a maximum at around 700 nm attributed to the solvated electron is also seen in solutions containing a low DMSO/water volume ratio and at 266 nm irradiation of a 50% methanol/water solvent mixture. The molar absorption coefficient of the triplet state of gilvocarcin V (GV) and gilvocarcin M (GM), determined by the energy transfer method, is independent of the solvent properties and has a value of 3.0 × 10⁴/ M cm. The triplet decay rate constants for both drugs are between 1 and 5 × 10⁴/s. A similar initial yield and triplet decay rate constant of GV were observed in the presence of 3.4 m M thymine. Thus, a quenching rate constant of the GV's triplet state by thymine is estimated to be lower than 10⁶/Ms. The triplet quantum yields of both antibiotics determined by using the comparative method are higher in dimethylsulfoxide (DMSO) (0.18) than are those corresponding to 25% DMSO/water (0.06). The decrease in φ_T in the presence of water could be attributed to an enhanced internal conversion rate constant from the S₁ state or to an increase in the photoionization yield. The similarity of the transient intermediates and their yields for GV and GM suggest that their photobiological differences are due to other factors such as DNA binding constants, preferential localization of the drugs in the cell or the enhanced reactivity of the vinyl group toward cellular components.     

The CuII−CuI−Cu0(Hg) system in the presence of benzotriazole: Part I. A polarographic investigation

A polarographic investigation of Cu^II electroreduction from solutions of benzotriazole (BTA) of pH from 1 to 3 at a dropping mercury electrode shows the presence of two successive adsorption waves of equal height (waves Ic and IIIc) due, respectively, to the formation and to the subsequent dissolution of an adsorbed film of a Cu^I compound. The dependence of the half-wave potential of wave IIIc, which is polarographically reversible, upon pH and BTA concentration indicates that the adsorbed film has the composition [Cu^I(BTA^?)], where BTA^? denotes the deprotonated anionic form of benzotriazole. Moreover, the maximum height of wave IIIc indicates that this film is one monolayer thick. A third cathodic wave (wave IIc), lying between waves Ic and IIIc, stems from the reduction to the metal state of the Cu^II ions diffusing from the bulk solution. Copper(0) oxidation at dropping amalgam electrodes in BTA solutions yields two successive adsorption waves (waves Ia and IIa). Wave Ia is due to the same electrode process, Cu⁰ (Hg)+BTA?Cu^I(BTA^?)+H⁺+e, responsible for the cathodic wave IIIc. On the other hand, wave IIa is due to the formation of roughly two adsorbed monolayers of [Cu^I(BTA^?)] upon that formed along wave Ia.     

Symmetrisation of β-alkoxyalkylmercury(II) acetates

β-Alkoxyalkylmercury(II) acetates have been symmetrised in situ with alkaline sodium stannite to afford good yields of bis(β-alkoxyalkyl)mercurials, [R¹R²C(OR)CHR³]₂ Hg.     

Regiospecific synthesis of symmetrical (1E,3E) 2,3-difluoro-1,4-diphenyl-buta-1,3-dienes via palladium-catalyzed cross-coupling of (Z) 2-bromo-2-fluoroethenylbenzenes in presence of bis(pinacolato)diboron

The cross-coupling reaction of (Z) 1-bromo-1-fluoroalkenes catalyzed by PdCl₂(PPh₃)₂-2PPh₃ (3%) and CsF in Tetrahydrofuran (THF) in presence of bis(pinacolato)diboron led to (1E,3E) 2,3-difluoro-1,4-disubstituted-buta-1,3-dienes in high yields.     

Infrared study of the stability and folding kinetics of a 15-residue beta-hairpin

The thermal stability and folding kinetics of a 15-residue beta-hairpin (SESYINPDGTWTVTE) have been studied by using infrared (IR) spectroscopy coupled with laser-induced temperature-jump (T-jump) technique for rapid folding-unfolding initiation. An alternative method based on analyzing IR difference spectra was also introduced to obtain thermodynamic properties of beta-sheets, which complements the commonly used circular dichroism (CD) and fluorescence techniques. Equilibrium IR measurements indicate that the thermal unfolding of this beta-hairpin is fairly broad. However, it can be described by a two-state transition with a thermal melting temperature of approximately 29 degrees C. Time-resolved IR measurements following a T-jump, probed at 1634 cm(-1), indicate that the folding of this beta-hairpin follows first-order kinetics and is amazingly fast. At 300 K, the folding time is approximately 0.8 micros, which is only 2-3 times slower than that of alpha-helix formation. Additionally, the energetic barrier for folding is small (approximately 2 kcal mol(-1)). These results, in conjunction with results from other studies, support a view that the details of native contacts play a dominant role in the kinetics of beta-hairpin folding.     

Access to the spiro hydrindandione ring system of Fredericamycin A through spiroalkylation and oxidation.

Indene could be spiro alkylated with bis-1,2-bromomethyl benzene derivatives. Further functionalization of the benzylic positions led to the dihydroxy dibenzospiro 4,4 nonane dione ring system of Fredericamycin A.     

A detailed analysis of the polarographic behaviour of methylene blue in phosphate buffer on mercury

Polarographic current-potential characteristics and current-time curves for the reduction of methylene blue (MB) to methylene blue leucoform (MBL) in a pH 7.9 aqueous phosphate buffer have been examined in detail over a wide concentration range. It has thus been shown that the so called “normal” or “main” reduction wave of MB actually consists of two separate steps, the former with a half-wave potential practically coinciding with the formal potential E₀=?0.250 V/SCE of the MB/MBL couple and the latter with a half-wave potential of about ?0.310 V/SCE. As soon as the well-known MB adsorption prewave has attained its maximum height (which occurs at a MB bulk concentration c₀^*?5×10^?5M), a further slight increase in c₀^* causes the appearance of the wave with E_1/2=?0.310 V. The height of the linear potential-sweep voltammetric peak corresponding to the latter wave increases proportionally to the sweep rate, thus revealing the “adsorption” nature of this wave. A comparison with a previous chronocoulometric investigation of the MB/MBL system has permitted us to conclude that the wave with E_1/2=?0.310 V is due to reduction of the MB molecules which, after having reached the surface of the dropping electrode by diffusion, are adsorbed at the top of the adsorbed monolayer of MBL in direct contact with the electrode and remain in this adsorbed state after reduction. For c₀^*>7×10^?5M the wave with E_1/2?E₀=?0.250 V starts to develop. This wave is due to the electroformation of MBL molecules which diffuse back into the solution. The shape of polarographic current-potential characteristics and current-time curves has been accounted for semiquantitatively through an approximate solution of the corresponding diffusional problem.     

Two-step elution of human serum proteins from different glass-modified bioactive surfaces: a comparative proteomic analysis of adsorption patterns

Plasma protein adsorption patterns on surfaces may give vital information to evaluate biocompatibility of biomaterials designed for direct blood-contacting applications or tissue integration. Adsorption of human serum proteins on four different types of biomaterials (glass, aminosilanized glass, hyaluronan and sulfated hyaluronan) was analyzed by two-dimensional electrophoresis. Desorption of proteins from the surfaces was first classically achieved by sodium dodecyl sulfate (SDS) elution. We introduced a second elution step (by use of isoelectric focusing (IEF) sample buffer consisting of urea, 3-[(3-cholamidopropyl)dimethylammonio]-1-propansulfonate, and dithioerythritol) which allows more stringent elution conditions and is a tool to evaluate the protein adsorption strength to biomaterials. Moreover, the two-step elution may discriminate between irreversible and reversible adsorption of plasma proteins for biomaterials, thus helping to elucidate the structure of protein multilayers which form a complex system at the surfaces. The IEF sample buffer proved not to alter the biomaterial structure and integrity. Hydrophobic bonds resulted to be the main strength driving protein adsorption onto our biomaterials. Apolipoproteins were the most important proteins interacting with the surfaces suggesting that high-density lipoprotein (HDL) particles could play a role in biocompatibility due to their beneficial effects on endothelial cells.     

Fluorescent Nitric Oxide Photodonors Based on BODIPY and Rhodamine Antennae

Two novel NO photodonors (NOPDs) based on BODIPY and Rhodamine antennae activatable with the highly biocompatible green light are reported. Both NOPDs exhibit considerable fluorescence emission and release NO with remarkable quantum efficiencies. The combination of the photoreleasing and emissive performance for both compounds is superior to those exhibited by other NOPDs based on similar light-harvesting centres, making them very intriguing for image-guided phototherapeutic applications. Preliminary biological data prove their easy visualization in cell environment due to the intense green and orange-red fluorescence and their photodynamic action on cancer cells due to the NO photo-liberated.