Direct determination of selenium in urine samples by electrothermal atomic absorption spectrometry using a Zr plus Rh-treated graphite tube and co-injection of Rh as chemical modifier

Different chemical modifiers for use with electrothermal atomic absorption spectrometry (ET AAS) were investigated in relation to determining the selenium in human urine samples. The samples were diluted in a solution containing 1% v/v HNO₃ and 0.02% m/v cetyltrimethylammonium chloride (CTAC). Studying the modifiers showed that the use of either Ru or Ir as the permanent modifier gave low sensitivity to Se and the peak shape was very noisy, while Zr or Rh gave no peak at all. The same occurred when Zr was used in solution. For mixtures of permanent modifiers, Ir plus Rh or Zr plus Rh gave very low sensitivity, Zr plus Rh with co-injection of Ir in solution was also not efficient, Zr plus Rh in solution gave good sensitivity, but the best results were obtained with a mixture of Zr and Rh as the permanent modifier and co-injection of Rh in solution. Using this last modifier, the following dilutions with the HNO₃ and CTAC were studied: 1:1, 1:2, 1:3 and 1:4. The best dilution was 1:1, which promoted good sensitivity and a more defined peak shape and made it possible to correct for the background using a deuterium arc lamp. Under these conditions, a characteristic mass of 26±0.2 pg was obtained for Se in aqueous solution. Six certified urine samples were analyzed using matrix matching calibration and the measured concentrations were in agreement with the certified values, according to a t-test at the 95% confidence level. Recovery tests were carried out and the recoveries were in the range 100–103%, with relative standard deviation better than 9%. The limit of detection (LOD, 3 sd, n=10) was 3.0 μg L⁻¹ in the sample. The treated graphite tube could be used for at least 600 atomization cycles without significant alteration of the analytical signal.     

The nature of active sites in Ba(OH)2 catalyst

A general and repetitive method to determine the base strength and number of basic sites of catalysts with low surface area is reported. The nature of the titrating agent is discussed. The nature of the active sites of a Ba(OH)₂ catalyst with low surface area is discussed.

---

. . Ba(OH)₂, .

     

Activation thermodynamic parameters of binary mixtures of propionic acid ando-substituted anilines

Variations of densities and viscosities with temperature and composition are reported for binary liquid mixtures containing propionic acid+aniline (I),+o-toluidine (II),+o-anisidine (III), and+o-chloroaniline (IV). Entropies S _m and enthalpies H _m of activation as functions of the composition of the mixtures, as well as free energies of activation G _m at 10, 20, 30, 40, and 50°C and different compositions were calculated by means of Eyring's equation. The formation of activated complexes between the components of these binary mixtures is postulated and claimed to result from acid-base and hydrogen bonding exchange interactions.     

A straightforward approach to antibodies recognising cancer specific glycopeptidic neoepitopes

Aberrantly truncated immature O-glycosylation in proteins occurs in essentially all types of epithelial cancer cells, which was demonstrated to be a common feature of most adenocarcinomas and strongly associated with cancer proliferation and metastasis. Although extensive efforts have been made toward the development of anticancer antibodies targeting MUC1, one of the most studied mucins having cancer-relevant immature O-glycans, no anti-MUC1 antibody recognises carbohydrates and the proximal MUC1 peptide region, concurrently. Here we present a general strategy that allows for the creation of antibodies interacting specifically with glycopeptidic neoepitopes by using homogeneous synthetic MUC1 glycopeptides designed for the streamlined process of immunization, antibody screening, three-dimensional structure analysis, epitope mapping and biochemical analysis. The X-ray crystal structure of the anti-MUC1 monoclonal antibody SN-101 complexed with the antigenic glycopeptide provides for the first time evidence that SN-101 recognises specifically the essential epitope by forming multiple hydrogen bonds both with the proximal peptide and GalNAc linked to the threonine residue, concurrently. Remarkably, the structure of the MUC1 glycopeptide in complex with SN-101 is identical to its solution NMR structure, an extended conformation induced by site-specific glycosylation. We demonstrate that this method accelerates dramatically the development of a new class of designated antibodies targeting a variety of “dynamic neoepitopes” elaborated by disease-specific O-glycosylation in the immunodominant mucin domains and mucin-like sequences found in intrinsically disordered regions of many proteins.

We developed new class of designated antibodies targeting of “dynamic neoepitopes” elaborated by disease-specific O-glycosylation at the immunodominant mucin domains.     

(S)-3-苯基-2-氨基丙硫醇盐酸盐的合成

以L 苯丙氨酸为原料经还原反应得到氨基醇,用Boc基团进行氨基保护后得到(S) 3 苯基 2 叔丁氧羰基氨基 1 丙醇,甲磺酰化后与硫代乙酸钾在DMF中反应得到(S) 3 苯基 2 叔丁氧羰基氨基 1 丙硫醇乙酸酯,再分别脱除乙酰基,氨基保护基后得到(S) 3 苯基 2 氨基丙硫醇盐酸盐.并用元素分析、红外光谱、核磁共振等手段对中间体和目标化合物进行了表征.     

Synthesis of a Novel Core-shell Type Acrylic-polyurethane Hybrid Emulsion Containing Siloxane and Fluorine as well as Water and the Oil Resistances of Cured Film

Aqueous acrylic-polyurethane dispersions have become one of the major types of materials used in coating, paint and adhesive industries, because of excellent properties and environmental advantages1-5. However, some properties for cured film such as water…     

On-line preconcentration of mercury by sorption on an anion-exchange resin loaded with 1,5-bis[(2-pyridyl)-3-sulphophenyl methylene] thiocarbonohydrazide and determination by cold-vapour inductively coupled plasma atomic emission

1,5-Bis[(2-pyridyl)-3-sulphophenyl methylene] thiocarbonohydrazide (PSTH) immobilized on an anion-exchange resin (Dowex) has been used for the on-line preconcentration of mercury from biological samples and waters prior to its determination by inductively coupled plasma atomic emission spectroscopy. The metal was eluted from the column using a solution of 2 M HNO(3) and mixed on-line with SnCl(2). The optimum experimental conditions were evaluated for the continuous preconcentration of Hg, the direct generation of mercury vapour and the final determination of this element by ICP-AES. The enrichment, together with low blank levels of the optimized procedure, allow the simple determination of this toxic element at concentrations down to a few nanograms per milliliter. The proposed method has a linear calibration range 5-1000 ng ml(-1) of mercury, with a detection limit of 4 ng ml(-1) (S/N=3) and a sampling rate of 40 h(-1), investigated with a 9 ml sample volume. The precision of the method (evaluated as the relative standard deviation obtained after analyzing ten series of ten replicates) was +/-3.6% at the 10 ng ml(-1) level of Hg(II) and +/-1.3% at the 100 ng ml(-1) level. The accuracy of the method was examined by the analysis of certified reference materials.     

Oxorhenium(V) Complexes with Thiosemicarbazones

Neutral oxorhenium(V) complexes with thiosemicarbazones derived from 2‐pyridine formamide, HL¹, are formed when [ReOCl₃(PPh₃)₂] reacts with equimolar amounts of the ligands. Reduction of the metal and the formation of rhenium(III) complexes of the composition [Re(L¹)₂]⁺ occurs when an excess of thiosemicarbazones is used and the reaction is performed in boiling toluene for a prolonged period of time. The thiosemicarbazones deprotonate and act as tridentate ligands as has been confirmed by an X‐ray structure of [ReOCl₂(L^1b)], where HL^1b is 2‐pyridineformamide‐N(4)‐ethylthiosemicarbazone and the ligand occupies the equatorial coordination sphere of the complex together with one of the chloro ligands.