Micellar liquid chromatography: suitable technique for screening analysis

The screening capability of micellar liquid chromatography (MLC) is discussed using the reported chromatographic data of several sets of compounds (amino acids, beta-blockers, diuretics, phenethylamines, phenols, polynuclear aromatic hydrocarbons, steroids and sulfonamides) and new results (sulfonamides and steroids). The chromatographic data are treated with an interpretive optimisation resolution procedure to obtain the best separation conditions. Usually, the pH and the concentration of surfactant (sodium dodecyl sulfate, SDS, or cetyltrimethylammonium bromide) for the optimal mobile phase were 2.5-3 and < 0.12 M, respectively. The nature and concentration of organic solvent depended on the polarity of the eluted compounds: a low volume fraction of propanol (approximately 1%, v/v) was useful to separate the amino acids, with log P(o/w) < -1 (where P(o/w) is the octanol-water partition coefficient). A greater concentration of this solvent (approximately 5-7%) was needed for compounds in the range -1 < log P(o/w) < 2, as with the studied diuretics and sulfonamides, and a high concentration of propanol (approximately 15%) or a low concentration of butanol (< 10%) had to be used for less polar compounds with 1 < log P(o/w) < 3, such as the beta-blockers. Pentanol (< 6%) was more suitable for the even less polar compounds with log P(o/w) > 3, such as the steroids. For basic drugs such as the phenethylamines (0 < log P(o/w) < 1.7), eluted with a micellar eluent of anionic SDS, propanol was too weak. A study is also shown for mixtures of sulfonamides (log P(o/w) = -1.2 to 1.7) and steroids (log P(o/w) = 3.0-8.1) eluted from conventional C18 columns with SDS mobile phases containing acetonitrile and 1-pentanol, respectively, which are compared with classical acetonitrile-water and methanol-water mixtures. The results complement a previous study on beta-blockers (log P(o/w) = -0.03 to 2.8) and reveal that MLC is a very competitive technique for the screening of compounds against conventional RPLC, due to its peculiar behaviour with regard to the selectivity and elution strength. The concentration of organic solvent needed to obtain sufficiently low retention times (even for highly hydrophobic steroids with log P(o/w) = 7-8) is also appreciably smaller for MLC, which reduces the environmental impact of the mobile phases.     

Kinetic determination of tellurium based on its inhibitory effect on the palladium(II)-catalysed reaction between pyronine G and hypophosphite ion

A kinetic method for the determination of Te based on its inhibitory effect on the PdII-catalysed reaction between pyronine G and H2PO2- is described. The influence of experimental variables on the rate of the process and the potential interfering effect of a large number of ions has been studied. Under the selected experimental conditions: 6 x 10(-5) M pyronine G; 0.6 M H2PO2-; pH 2.6, adjusted with Britton-Robinson buffer; 0.80 microgram ml-1 of PdII; and a temperature of 22 +/- 0.2 degrees C, Te was determined in the concentration range 0.08-0.85 microgram ml-1. The method was applied to the determination of Te in waters and lead concentrates.     

Synthesis of donor-acceptor alkynylcyclopropanes by diastereoselective cyclopropanation of electron-deficient alkenes with alkoxyalkynyl Fischer carbene complexes

The reaction of electron-deficient alkenes with alkoxyalkynyl Fischer carbene complexes (FCCs) represents a straightforward route to a new type of captodative (donor-acceptor) alkynylcyclopropanes, which have been prepared in moderate to high yields and in a diastereoselective manner. Some studies regarding the employment of additives to facilitate the recovery of the metal moiety after the reaction are also described. Finally, the first example of a cyclopropanation reaction through employing Fischer carbene complexes under microwave irradiation is presented; this method proved to be an advantageous alternative to the thermal reaction.     

Excess molar volumes and excess viscosities for then-hexane+dichloromethane+tetrahydrofuran ternary system at 25°C

Exces molar volumes, and excess viscosities of then-hexane+dichloromethane+tetrahydrofuran system have been determined at 25°C by measuring densities and viscosities. Different expressions exist in the literature to predict these excess properties from binary data. The empirical correlation of Cibulka is shown to be the best in this system.     

Control of the Properties of Carbon Nanotubes Synthesized by CVD for Application in Electrochemical Biosensors

Interest in carbon nanotubes (CNT) has grown at a very rapid rate in the last decade. Their interesting physical and chemical properties open attractive possibilities in many application areas. These properties depend on the process conditions during synthesis and on subsequent purification steps. Recent studies have demonstrated that CNT can promote the electron transfer of biomolecules. These exceptional properties make them attractive for use in electrochemical biosensors. Multi walled nanotubes have been synthesized by the Chemical Vapor Deposition (CVD) method using methane as a carbon source and Ni–Al₂O₃–SiO₂ as the catalyst. The influence of the variation of certain reaction parameters such as feed gas composition, catalyst mass, temperature and reaction time in the yield of the CVD process has been established. In addition, the structural and chemical characteristics of the CNTs have been studied and a purification process to eliminate the catalyst and amorphous carbon has been developed that involves a gaseous oxidative process and acid treatment. The efficiency of the purification step has been determined by analytical techniques. Atomic force microscopy, Raman scattering, thermogravimetric analysis, inductively coupled plasma atomic spectroscopy are the characterization techniques employed in this work.     

Detection of soil pollution by hydrocarbons using headspace-mass spectrometry and identification of compounds by headspace-fast gas chromatography-mass spectrometry

The direct coupling of a headspace sampler with a mass spectrometer is proposed as a screening tool for the rapid detection of soil pollution by hydrocarbons from petroleum and derivatives. The samples are subjected to the headspace generation process, with no prior treatment, and the volatiles generated are introduced directly into the mass spectrometer, thereby obtaining a fingerprint of the sample analysed. Suitable treatment of the signal by chemometric techniques allows unequivocal characterisation of the different types of sample. The use of fast gas chromatography with a mass spectrometer detector coupled to the headspace sampler allows identification of the major hydrocarbons present in the mineral and organic polluted samples, interpretation of the results obtained, and demonstrates the analytical potential of headspace-mass spectrometry coupling.     

Patterns in the precision of quantitative data from multicomponent gas chromatographic or gas chromatographic-mass spectrometric analysis

The dispersion of the quantitative results in the analysis of volatile compounds from multicomponent mixtures by different fractionation techniques (solid-phase microextraction and direct thermal desorption) followed by GC or GC-MS presents nonrandom patterns related to the existence of different factors in the fractionation process or in the chromatographic separation which affect, to a different extent, the recovery of the sample components. Statistical techniques have been used to show the relative importance of these factors. The improvement in data precision achieved by using volatile compound concentration ratios is discussed.     

Study on resolution capacity and secondary mechanisms of three different TSK gels for organic SEC

A comparative study on the elution behavior in size-exclusion chromatography (SEC) of three polymeric TSK gel packings, named H, H(HR), and H(XL) types, is performed. The deviations of the universal calibration (u.c.) curves of seven solvent-polymer systems show evidence that the existence of secondary effects accompanying the main SEC mechanism. These secondary mechanisms are a consequence of the binary enthalpic interactions between the different components of the chromatographic system, such as polymer-solvent, polymer-gel and solvent-gel. However, in the present case, the observed deviations from a unique u.c. curve can mainly be attributed to adsorption of polymeric solutes (analytes) onto the residual moieties of the gel surfaces, (i.e., to polymer-gel interactions). These enthalpic interactions can be quantitated by the values of the distribution coefficient, Kp, which follows the order: Kp (gel H(XL)) > Kp (gel H(HR)) > Kp (gel H). Moreover, the specific resolution of the three types of packings is also estimated, and its comparison yields that Rsp (gel H(HR)) > Rsp (gel H(XL)) > Rsp (gel H), in good agreement with their increasing particle size and decreasing crosslinking degrees. Finally, the errors and inaccuracies committed on the estimation of the sample average molar masses from their respective calibration curves serves the assessment that the packing with lesser secondary mechanisms is the H-type.     

Spectroscopic investigation of the adsorption and oxidation of thiourea on polycrystalline Au and Au(111) in acidic media

In the present paper, a systematic electrochemical investigation on thiourea (TU) electrooxidation was developed on polycrystalline and (111) single-crystal gold electrodes in 0.1 M perchloric acid. The combination of cyclic voltammetry with in situ Fourier transform infrared spectroscopy (FTIRS) and differential electrochemical mass spectrometry techniques have allowed the nature of the species formed during the electroadsorption and electrooxidation of TU to be established. FTIRS experiments were performed in D2O to clean up the region of the H2O bending around 1600 cm(-1). It was concluded that TU adsorbs tilted on the surface in the 0.05-0.40 VRHE potential range. A dual-path reaction mechanism was evidenced in the oxidation process. The first pathway takes place from adsorbed TU at E > 0.40 VRHE and implies the formation of [Au(I)-(TU)2]+, which is oxidized to NH2CN and S0 at E > 0.80 VRHE. In a following oxidation step at E > 1.20 V, N2, CO2, and HSO4-/SO4(2-) were produced. The second parallel reaction occurs from TU in solution at E > 0.50 VRHE to form (TU)2(2+). All these species were characterized from the spectroscopic experiments. Similar results were obtained for both surfaces.     

Determination of iron at ng/ml level by solid phase spectrophotometry after preconcentration on cation exchange filters

A cationic exchanger paper is used to retain analytes in solution and, after drying, to analyze directly by measuring the UV-Vis absorbance of the paper. The method was applied to determination of iron using its known 1,10-phenanthroline complex. Using 100 ml of sample the applicable concentration range was between 1.0 and 10.0 ng/ml with a detection limit of 0.2 ng/ml and a RSD around 2%. The method was applied to determination of iron total in snow, human serum and wine.