Indirect spectrophotometric determination of cyanide

A spectrophotometric method for cyanide based on its inhibition of the colour formation reaction between nickel(II) and 3-(4,5-dimethyl-2-thiazolylazo)-2,6-dihydroxybenzoic acid has been developed, and allows the determination of down to 0.1 g of cyanide. Most of the interferences can be avoided by displacement of the hydrogen cyanide using an arsine generator.     

Rapid determination of ethylene glycol at toxic levels in serum and urine

The rapid gas chromatographic detection and determination of ethylene glycol in biological fluids is described. Phenylboronic acid in acetone was used for the esterification of glycol. The phenylboronates of ethylene glycol and 1,2-propylene glycol are not separated on a packed column of medium polarity (OV-17), but they can be separated on a non-polar column (OV-101). In both instances, 1,3-propylene glycol can be used as an internal standard. The method requires only 100 microliters of serum or urine and is suitable for trace analysis in an emergency toxicological laboratory. The utility of the method is demonstrated on two cases of human intoxication with ethylene glycol.     

Reaction of mercury(II) and xylenol orange-I Effect of the buffering media

The influence of the buffering medium on the reaction of Hg(II) with Xylenol Orange has been studied. Amine-type compounds are complexed by Hg(II)/Xylenol Orange with a sharp hyperchromic effect on the reagent itself, at 590 nm, but complex formation of Hg(II)/Xylenol Orange in non-amine-type buffer, such as citric acid-phosphate, gives a hypochromic effect on Xylenol Orange at 580 nm. Hg(II) is determined at pH 7.5 in two ranges of concentration, 2-9 ppm in citrate buffer, measured at 580 nm ( = 2.50 x 10(4)), and 6-11 ppm in hexamine buffer, at 590 nm ( = 4.18 x 10(4)).     

Intramolecular "Aryl-metal chelate ring" pi,pi-interactions as structural evidence for metalloaromaticity in (aromatic alpha,alpha'-diimine)-copper(II) chelates: molecular and crystal structure of aqua(1,10-phenanthroline)(2-benzylmalonato)copper(II) three-hydrate

By reaction of Cu(2)CO(3)(OH)(2), 2-benzylmalonic acid (H(2)Bzmal), and 1,10-phenanthroline (phen), [Cu(Bzmal)(phen)(H(2)O)] x 3H(2)O (compound 1) has been obtained and characterized by thermal, spectral, magnetic, and X-ray diffraction methods. The molecular structure of 1 is remarkably similar to that of [Cu(Bzmal)(bipy)(H(2)O)] x 2H(2)O (compound 2, bipy = 2,2'-bipyridine). In both complexes, the aryl(Bzmal) ring produces an unexpected pi,pi-stacking interaction with the Cu(II)-(aromatic alpha,alpha'-diimine) chelate ring, at an average distance d(pi)(-)(pi) of 3.40 A, involving roughly parallel and smoothly slipped rings. This insight is discussed as new structural evidence for metalloaromaticity of Cu(II)-(aromatic alpha,alpha'-diimine) chelate rings. Interestingly, 1 recognizes itself by a weak intermolecular pi,pi-stacking interaction between aryl(Bzmal) ligands to give pairs of complex molecules. In contrast, there is an intermolecular pyridyl-pyridyl pi,pi-stacking interaction also forming pairs of complex molecules in 2.     

Determination of the pH of binary mobile phases for reversed-phase liquid chromatography

The measurement of pH in chromatographic mobile phases has been a constant subject of discussion during many years. The pH of the mobile phase is an important parameter that determines the chromatographic retention of many analytes with acid-base properties. In many instances a proper pH measurement is needed to assure the accuracy of retention-pH relationships or the reproducibility of chromatographic procedures. Three different methods are common in pH measurement of mobile phases: measurement of pH in the aqueous buffer before addition of the organic modifier, measurement of pH in the mobile phase prepared by mixing aqueous buffer and organic modifier after pH calibration with standard solutions prepared in the same mobile phase solvent, and measurement of pH in the mobile phase prepared by mixing aqueous buffer and organic modifier after pH calibration with aqueous standard solutions. This review discusses the different pH measurement and calibration procedures in terms of the theoretical and operational definitions of the different pH scales that can be applied to water-organic solvent mixtures. The advantages and disadvantages of each procedure are also presented through chromatographic examples. Finally, practical recommendations to select the most appropriate pH measurement procedure for particular chromatographic problems are given.     

On distribution of molecular weight in anionic polymerizates of caprolactam

Measurement has been made of the dependence of the molecular weight distribution on the ratio of the catalytic system components and on the polymerization time for polycaprolactam obtained by anionic polymerization. A bimodal character of the curves was observed for products made using molar ratios of activator (N-benzoylcaprolactam) to initiator (sodium dihydro-bis(methoxyethoxy)aluminate) of 1:1 and 1:3, when the polymerization times were less than 1 hr. This course is explained by the influence of fast side-reactions, mainly condensations. For a ratio of 3:1 of the components of the catalytic system, smooth integral distribution curves are obtained, accounting for a very fast decrease in the strong base concentration in the initial stages of the polymerization.     

Influence of the pyridine methyl substituent position on the chemical changes of the NCS groups in the thermal decomposition of coordination compounds of the type Cu(NCS)2L2

The influence of the position of the CH₃ group in picoline and lutidine ligands on the degree of chemical change of the NCS groups in coordination compounds of the type Cu(NCS)₂L₂ (whereL=2-, 3- and 4-picoline, and 2,3-, 2,4-, 2,5-, 2,6-, 3,4- and 3,5-lutidine) is dealt with. The most marked effect of the CH₃ group is found to be exerted in position 4. This effect of the methyl group on the degree of chemical change points to the mutual influence of the ligands in coordination compounds of Cu(II).

---

Zusammenfassung Der Artikel befaßt sich mit dem Einfluß der Lage der CH₃ Gruppe in Pikolinen und Lutidinen als Liganden auf den Grad der chemischen Änderungen der Gruppen NSC in Koordinationsverbindungen des Typs Cu(NCS)₂L₂ (L=2-, 3- und 4-Pikoline, 2,3-, 2,4-, 2,5-, 2,6-, 3,4- und 3,5-Lutidine). Der ausgeprägteste Effekt der CH₃ Gruppe wurde in der Position 4 beobachtet. Dieser Einfluß der Methylgruppe auf das Ausmaß der chemischen Änderungen deutet auch auf die gegenseitige Wirkung der Liganden in Koordinationsverbindungen von Cu(II).

---

Résumé L'article a trait à l'influence de la position du groupe CH₂ dans les picolines et lutidines, en tant que ligands, sur le degré des changements chimiques des groupes SCN dans les composés de coordination du type Cu(SCN)₂L₂ (L=2-, 3 et 4-picoline, 2,3-, 2,4-,2,5-, 2,6-, 3,4- et 3,6-lutidine). L'effet le plus prononcé du groupe CH₃ s'observe en position 4. Cette influence du groupe méthyle sur le degré des changements chimiques indique aussi l'influence mutuelle des ligands dans les composés de coordination du Cu(II).

---

- , , NCS Cu(NCS)₂,L₂, L=2-, 3- 4- , 2.3-, 2.4-, 2.5-, 2.6-, 3.4- 3.5-. , 4. Cu(II).

     

Geometrical structure of yttrium and metal-bromine complexes in solution: limitations of extended X-ray absorption fine structure analysis (EXAFS)

An extensive study on the appearance of multi-electron features in the X-ray absorption spectra of several yttrium(III)-based compounds has been performed. The existence of a multi-electron transition of non-negligible intensity within the extended X-ray absorption fine structure (EXAFS) region of the Y K-edge spectra has been proven. The impact of such features in the EXAFS analysis is made evident for aqueous solutions of YBr3 x 6H2O in liquid and glassy states in the concentration range 0.005-2.0 M, in which this transition induces an overestimation in the coordination numbers derived from EXAFS. We have performed theoretical computation of cross-sections for the double-electron processes at the K-edge of both Y and Br. These computations have been applied to the experimental EXAFS K-edge spectra of both Y and Br in several solids and in aqueous solutions. While in the case of Y K-edge spectra the presence of such multi-electron transitions was seen to seriously affect the standard EXAFS analysis, its influence in the case of Br K-edge spectra was determined to be negligible.     

Thermodynamic parameters for the molecular inclusion reaction of dulcin with beta-cyclodextrin. spectrofluorimetric determination of dulcin

The inclusion of dulcin in alpha- and beta-cyclodextrin has been studied by fluorescence spectroscopy. To quantitatively describe complex formation between the beta-cyclodextrin and dulcin, an association constant of 290 M(-1) at 21 degrees was obtained. The thermodynamics associated with the complex formation between dulcin and beta-cyclodextrin in aqueous solution has been studied. The obtained value of DeltaG(0) = -13.7 kJ/mole at 21 degrees , together with DeltaH(0) = -33.6 +/- 2.3 kJ/mole and DeltaS(0) = -67.2 +/-8.3 Jmole(-1) K(-1) indicate that dulcin has a very marked tendency to associate with beta-cyclodextrin in water. The inclusion complex of dulcin in beta-cyclodextrin has been used to determine dulein in the range 0.13-5 mug/ml the method has been applied to determine dulcin in soft drinks.