Stereoselective syntheses of 1,4-dideoxy-1,4-imino-octitols and novel tetrahydroxyindolizidines

A new route for the preparation of four new indolizidines, (1R,2S,6S,7S,8aS)- and (1R,2S,6R,7R,8aS)-1,2,6,7-tetrahydroxyindolizidine (30 and 32) and (1S,2R,7S,8S,8aR)- and (1S,2R,7R,8R,8aR)-1,2,7,8-tetrahydroxyindolizidine (44 and 46), is reported. The synthesis is based on Knoevenagel homologation of the readily available enantiomerically pure pyrrolidin-carbaldehydes 13 and 37followed by asymmetric dihydroxylation of the subsequent alkenyl pyrrolidines and cyclization of the corresponding imino-octitols. The new indolizidines and their precursors (imino-octitols 20, 25, 26) and indolizidinones 28a and 28b have been tested for inhibitory activities toward 26 glycosidases. The enzymatic inhibition of trans-7-hydroxy-d-(-)-swainsonine (44) toward alpha-mannosidases is similar to that described for trans-7-hydroxy-l-(+)-swainsonine (11b) toward naringinase (alpha-l-rhamnosidase from Penicillium decumbens).     

Extraction of cesium from water into nitrobenzene using hydrogen dicarbollylcobaltate in the presence of p-nonylphenylnonaethylene glycol

The extraction of cesium by a nitrobenzene solution of hydrogen dicarbollylcobaltate (H⁺B^-) in the presence of Slovafol 909 (p-nonylphenylnonaethylene glycol, L) has been investigated. The equilibrium data have been explained assuming that the complexes HL⁺, HL₂ ⁺, CsL⁺ and CsL₂ ⁺ are extracted into the organic phase. The values of extraction and stability constants of the species in nitrobenzene saturated with water have been determined.     

Carbocyclic analogues of nucleosides from bis-(Hydroxymethyl)-cyclopentane: synthesis,antiviral and cytostatic activities of adenosine,inosine and uridine analogues

Six new carbocyclic nucleosides were prepared by constructing a purine base (in compounds 9-11) or pyrimidine base (in 6-8) on the amino groups of (+/-)-(1 beta,2 alpha,4 beta)-4-amino-1,2-cyclopentanedimethanol (4) and (+/-)-(1 beta,3 alpha,4 beta)-4-amino-1,3-cyclopentanedimethanol (5), and their activities against a variety of viruses and tumour cell lines were determined.     

Extraction of Pb2+ with sodium dicarbollylcobaltate in the presence of 15-crown-5

From extraction experiments with ²² Na as a tracer, the exchange extraction constant corresponding to the equilibrium Pb²⁺ (aq)+2 NaL⁺ (nb)PbL₂ ²⁺ (nb)+2 Na⁺ (aq) in the two-phase water-nitrobenzene system (L = 15-crown-5; aq = aqueous phase, nb = nitrobenzene phase) was evaluated as log K_ex (Pb²⁺ , 2NaL⁺ ) = 4.7±0.1. Moreover, the stability constant of the complex PbL₂ ²⁺ in nitrobenzene saturated with water was calculated for a temperature of 25 °C as log _nb (PbL₂ ²⁺ ) = 17.9±0.1.     

Rare earth metal complexes with 1,3-bis-(2-hydroxyphenyl)-1,3-propanedione. An example of anhydrous rare earth β-diketonates

Summary The interaction of non-anhydrous solutions of the ligand 1,3-bis-(2-hydroxyphenyl)-1,3-propanedione (bhppH₃) with hydrated rare earth chlorides resulted in the formation of anhydrous, non-solvated, complexes M(bhppH₂)₃ (M=Y, La, Nd, Pr, Sm or Yb). The complexes have been characterized by elemental analysis, t.g., i.r. and¹H n.m.r. spectroscopy. The evidence suggests that the coordination is through the -diketone site.     

Determination of aflatoxins in peanuts by matrix solid-phase dispersion and liquid chromatography

A new method based on matrix solid-phase dispersion (MSPD) extraction was studied to determine aflatoxin B1, B2, G1 and G2 from peanuts. Optimization of different parameters, such as type of solid supports for matrix dispersion and elution solvents were carried out. The method used 2 g of peanut sample, 2 g of C18 bonded silica as MSPD sorbent and acetonitrile as eluting solvent. Recoveries of each aflatoxin spiked to peanut samples at 2.5 ng/g (5 ng/g for aflatoxin G2) level were between 78 and 86% with relative standard deviations ranging from 4 to 7%. The limits of quantification ranged from 0.125 to 2.5 ng/g for the four studied aflatoxins using liquid chromatography (LC) with fluorescence detection. In addition, LC coupled to mass spectrometry with an electrospray interface was used for confirmation of aflatoxins present in real samples. Eleven peanut samples from different countries were analyzed by the proposed method and by using an enzyme-linked immunosorbent assay (ELISA). ELISA test is a good screening method for investigation of these mycotoxins in peanut samples.     

Determination of cadmium,aluminium, and copper in beer and products used in its manufacture by electrothermal atomic absorption spectrometry

Procedures were developed for determining cadmium, aluminium, and copper in beer and the products used in its manufacture by electrothermal atomic absorption spectrometry. Beer samples were injected into the furnace and solid samples were introduced as suspensions after preparation in a medium containing hydrogen peroxide, nitric acid, and ammonium dihydrogen phosphate for cadmium atomization. Calibration was performed with aqueous standards, and characteristic masses and detection limits were, respectively, 1 and 0.3 pg for cadmium, 18 and 5.4 pg for aluminium, and 5.6 and 6.8 pg for copper. Different samples of beer, wort, brewer's yeast, malt, raw grain, and hops were analyzed by the proposed procedures. Cadmium was found in low concentrations (0.001-0.08 microg/g and 0-1.3 ng/mL); copper (3-13 microg/g and 25-137 ng/mL) and aluminium (0.6-9 microg/g and 0.1-2 microg/mL) were found at higher levels. The reliability of the procedure was confirmed by comparing the results obtained with others based on microwave oven sample digestion, and by analyzing several certified reference materials.     

Polarographic and voltammetric determination of trace amounts of 2-nitronaphthalene

The polarographic behaviour of 2-nitronaphthalene was investigated by DC tast polarography (DCTP) and differential pulse polarography (DPP), both at a dropping mercury electrode, and differential pulse voltammetry and adsorptive stripping voltammetry, both at a hanging mercury drop electrode. Optimum conditions have been found for the determination of 2-nitronaphthalene by the given methods in the concentration ranges of 2×10^–6–1×10^–4, 2×10^–7–1×10^–4, 1×10^–8–1×10^–4 and 2×10^–9–1×10^–8 M, respectively. Practical applicability of these techniques was demonstrated by the determination of 2-nitronaphthalene in drinking and river water after its preliminary separation and preconcentration using liquid–liquid and solid-phase extraction with limits of determination of 3×10^–10 M (drinking water) and 3×10^–9 M (river water).     

Dilatational rheology of beta-casein adsorbed layers at liquid-fluid interfaces

The rheological behavior of beta-casein adsorption layers formed at the air-water and tetradecane-water interfaces is studied in detail by means of pendant drop tensiometry. First, its adsorption behavior is briefly summarized at both interfaces, experimentally and also theoretically. Subsequently, the experimental dilatational results obtained for a wide range of frequencies are presented for both interfaces. An interesting dependence with the oscillation frequency is observed via the comparative analysis of the interfacial elasticity (storage part) and the interfacial viscosity (loss part) for the two interfaces. The analysis of the interfacial elasticities provides information on the conformational transitions undergone by the protein upon adsorption at both interfaces. The air-water interface shows a complex behavior in which two maxima merge into one as the frequency increases, whereas only a single maximum is found at the tetradecane interface within the range of frequencies studied. This is interpreted in terms of a decisive interaction between the oil and the protein molecules. Furthermore, the analysis of the interfacial viscosities provides information on the relaxation processes occurring at both interfaces. Similarly, substantial differences arise between the gaseous and liquid interfaces and various possible relaxation mechanisms are discussed. Finally, the experimental elasticities obtained for frequencies higher than 0.1 Hz are further analyzed on the basis of a thermodynamic model. Accordingly, the nature of the conformational transition given by the maximum at these frequencies is discussed in terms of different theoretical considerations. The formation of a protein bilayer at the interface or the limited compressibility of the protein in the adsorbed state are regarded as possible explanations of the maximum.