The behavior of cracked cross-ply composite laminates under shear loading

An interlaminar-shear-stress analysis developed earlier by Tsai et al. (1990, Micro-cracking-Induced Damage in Composites) for a [φ_m/θ_n], bi-directional composite laminate is used to solve the case of a cross-ply [0_m/90_n]_x laminate with the 90° layer only or both layers cracked under pure shear loading. Strains, forces and laminate shear modulus reduction due to matrix cracking were obtained. Experimental results for shear modulus as a function of crack densities were obtained by a simple shear test and they agree very well with the theoretical prediction.     

Uniformization and the diversity of Whitehead groups

Techniques of uniformization are used to prove that it is not consistent that the Whitehead groups of cardinality ℵ₁ are exactly the strongly ℵ₁-free groups. Some consequences of the assumption that every strongly ℵ₁-free group of cardinality ℵ₁ is Whitehead are derived. Other results about uniformization are also proved. Research partially supported by NSERC grant #9848. Research partially supported by the BSF. The authors thank Rutgers University for its support. Publication #441.     

Ein Verfahren zur Synthese enantiomerenreiner Alkanole durch reduktive Entschwefelung von Thiophenalkoholen

Summary Acetals3 and4 of alkylthienylcarbinols1 were prepared using an enantiomerically pure lactol2. In the key step these compounds were desulfurized. After deprotection the target compounds7 andent-7 were obtained.

Herrn Prof. Dr. H. Oelschläger zum 70. Geburtstag gewidmet     

Reactions of the nitrate radical with a series of reduced organic sulphur compounds in air

A 480 L evacuable reaction chamber, equipped with FT-IR spectroscopy on-line and ion chromatography off-line, has been used to study the gas phase reaction between the nitrate radical, NO₃, and the reduced organic sulphur compounds CH₃CH₂SH, (CH₃CH₂)₂S, (CH₃CH₂)₂S₂, and CH₃CH₂SCH₃ in air. The products CH₃CH₂SO₃H, SO₂, H₂SO₄, CH₃CHO, and CH₃CH₂ONO₂ were identified and quantified in the reactions of the first three compounds, CH₃CH₂SH, (CH₃CH₂)₂S, and (CH₃CH₂)₂S₂. The reaction products were CH₃CH₂SO₃H, CH₃SO₃H, SO₂, H₂SO₄, CH₃CHO, and CH₂O in the reaction of CH₃CH₂SCH₃. On the basis of identified reaction products and intermediates observed in the infrared spectra, mechanisms are proposed for the reactions between the NO₃ radical and the four reduced organic sulphur compounds. The results of this study, together with those from previous experiments performed in this laboratory on CH₃SCH₃, CH₃SH, and CH₃SSCH₃ lead to the conclusion that all these species, in the reaction with the NO₃ radical, follow a similar degradation mechanism producing SO₂, H₂SO₄, R? SO₃H, R? CHO, and R? CH₂ONO₂, as the main reaction products. The inital step of the reaction of NO₃ with R? S? R and R? S? H type (R = CH₃, CH₂CH₃) reduced organic sulphur compounds was found to be H-atom abstraction, probably after the formation of an initial adduct. For the reaction between NO₃ and R? S? S? R type compounds, evidence for an addition-decomposition reaction, as the initial steps, was obtained. R? S·, R? S(O)·, and R? S(O)₂· appear to be formed as intermediates in all the reactions. © John Wiley & Sons, Inc.     

Rapid magnetization reversal in magnetic small particles induced by non-static bias field

Magnetization reversal processes by a switching field in single-domain nano-sized magnetic particles in the presence of a small transverse non-static bias field are studied. Applying an oscillating bias field instead of a static field, the reversal time becomes much shorter when the switching field is slightly stronger than the effective anisotropy field. A pulsed bias field of a suitably chosen duration in the nanosecond scale is found to induce a rapid switching, even when the switching field is smaller than the anisotropy field. The dependence of the reversal time on the frequency of an oscillating bias field and the duration of a pulsed bias field are studied. The present work thus complement the earlier studies on switching in the presence of a static bias field.     

Three chiral vinyldioxaza­borocanes

The structures of three chiral vinyldioxaza­borocanes are reported, namely (2E)‐ and (2Z)‐6‐benzyl‐2‐buten‐2‐yl‐1,3,6,2‐dioxaza­borocane, C₂₇H₃₀BNO₂, (II) and (III), respectively, and (2Z)‐2‐buten‐2‐yl‐6‐isobutyl‐1,3,6,2‐dioxaza­boro­cane, C₂₄H₃₂BNO₂, (IV). These compounds may be useful in asymmetric reactions. In the structures reported here, the N—B donor–acceptor bond is longer than in any previously reported analogous compounds.     

2-Propanol oxidation on platinum and platinum–rhodium electrodeposits

The electrocatalytic oxidation of 2-propanol was investigated using on line differential electrochemical mass spectrometry (DEMS) on electrodeposited Pt and an arrange of bimetallics: Pt_0.84Rh_0.16, Pt_0.70Rh_0.30, Pt_0.55Rh_0.45. It has been observed that the Pt_0.84Rh_0.16 bimetallic electrode presented the best catalytic activity for 2-propanol electrochemical oxidation. Since 2-propanol is a secondary alcohol, only acetone and CO₂ are produced. The total yield of CO₂ and acetone has been determined from the DEMS measurements. It is found that acetone is the major product, as reported before for other electrodes. The acetone and CO₂ yield depends on the electrode composition. High amount of rhodium in the electrode composition strongly diminish the reaction rate as indicated by the decrease of both the acetone and CO₂ yield. However, acetone inhibition is much more intense. The only bimetallic electrode that presents considerable mass spectroscopy signals intensity for CO₂ and acetone is the Pt_0.84Rh_0.16 electrode. This electrode shows a slight increase in CO₂ selectivity, compared to the other electrodes studied in this work. Only very low coverages of stable adsorbates were present during the reaction. Two and one carbon adsorbate were observed for all the electrodes. Three carbon adsorbates were detected only for the Pt_0.84Rh_0.16 electrode. Therefore, acetone production does not require a stable adsorbate.     

Sorption of cesium from aqueous waste solution on a SuperLigÒ644 resin

Summary The removal of cesium from aqueous waste solution was investigated in a column setup using a relatively coarse SuperLig^ò644 resin. The bed volume (BV=140) at the onset of breakthrough surpassed the design requirement of 100 BV at 50% breakthrough, and also corresponds to 99.96% cesium removal. Cesium elution with 0.5M HNO₃was satisfactory with a peak BV of 2.5. The elution BV for C/C₀=0.01 was 10, which is less than the target of 15 BV. The percent of sorbed cesium eluted was 99.88%. Further, the BV of the various solutions used for the supporting process steps was sufficient.