Single-Atom Electrocatalysts from Multivariate Metal–Organic Frameworks for Highly Selective Reduction of CO2 at Low Pressures

Single-atom catalysts (SACs) are of great interest because of their ultrahigh activity and selectivity. However, it is difficult to construct model SACs according to a general synthetic method, and therefore, discerning differences in activity of diverse single-atom catalysts is not straightforward. Herein, a general strategy for synthesis of single-atom metals implanted in N-doped carbon (M₁-N-C; M=Fe, Co, Ni and Cu) has been developed starting from multivariate metal–organic frameworks (MOFs). The M₁-N-C catalysts, featuring identical chemical environments and supports, provided an ideal platform for differentiating the activity of single-atom metal species. When employed in electrocatalytic CO₂ reduction, Ni₁-N-C exhibited a very high CO Faradaic efficiency (FE) up to 96.8 % that far surpassed Fe₁-, Co₁- and Cu₁-N-C. Remarkably, the best-performer, Ni₁-N-C, even demonstrated excellent CO FE at low CO₂ pressures, thereby representing a promising opportunity for the direct use of dilute CO₂ feedstock.     

固相萃取-离子色谱法测定血液中草甘膦及其代谢物氨甲基膦酸

草甘膦是目前世界上使用量最大的除草剂之一,被广泛应用于控制农田或非耕作用地中一年生或多年生杂草的生长[1]。草甘膦是一种生物蛋白质合成抑制剂,其通过抑制5-烯醇丙酮莽草酸-3-磷酸盐合成酶(EPSPs)的活性,使植物体内蛋白质合成受阻,致使植物死亡[2]。草甘膦原药在美国毒性分级中被评定为Ⅲ,被认为是相对较安全的农药,但经商品化改造的草甘膦的毒性是前者的数倍[3],会造成人体上皮细胞膜的损伤[4]、细胞中的血浆损伤和线粒体功能受损[5],甚至有致癌的风险。     

BiPO4/石墨烯光电极的制备及其光电催化性能（英文）

光电催化(PEC)氧化法是一种使用半导体电极材料在光和电的共同作用下处理水中有机污染的有效方法.在PEC工艺中,施加偏压不仅可以利用电催化对有机污染物进行降解,而且在偏压作用下,光生电子-空穴对能够得到有效的分离和传输,从而大大提高了机物污染物的去除速率.尽管PEC技术已经取得了许多重要的突破,但是能量转换效率仍然无法满足实际应用.因此,开发具有优异性能,良好稳定性和低成本的光电极材料是一项具有挑战性的研究工作.本文采用两步电沉积法制备了BiPO4纳米棒/还原氧化石墨烯/FTO复合光电极(BiPO4/r GO/FTO).电镜结果表明,电沉积制得的纳米棒状磷酸铋均匀负载在石墨烯纳米片层表面.采用甲基橙为模型体系,考察了复合光电极的光电催化活性.BiPO4/r GO/FTO复合电极的光电催化降解速率是BiPO4/FTO光电极的2.8倍,显示出优良的光电催化活性.实验进一步研究了工作电压和BiPO4沉积时间对甲基橙光电降解性能的影响.最佳的BiPO4沉积时间为45 min,最佳工作电压为1.2 V.捕获实验和ESR实验表明羟基自由基(·OH)和超氧化物自由基(·O2-)是该电极的主要活性物种.BiPO4/r GO/FTO复合电极经过四次循环实验后其降解甲基橙效率保持不变,显示出高稳定性,采用光电流,交流阻抗及其荧光测试对其光催化机理进行推测.结果表明该复合光电极具有高PEC活性的主要原因是:石墨烯的引入加快了BiPO4的电子空穴的分离,拓宽了石墨烯的可见光吸收范围;同时,石墨烯诱导产生的BiPO4混合相也进一步促进了光生电子空穴的分离,提高了光电降解活性.     

三氟乙酸酐(TFAA)促进的Stieglitz重排反应制备苯胺

本工作使用简单易得的三氟乙酸酐作为活化试剂,拓展了Stieglitz重排反应的底物适用范围,发展了一种通过C—C键断裂由苯乙基羟胺制备芳基伯胺的方法.该反应条件较为温和且对官能团具有较好的兼容性.机理研究表明,反应经历了活性三氟乙酸酯中间体的原位生成,并通过C—C和N—O键的断裂实现芳基迁移的过程.     

Controlling the Microstructure of Conjugated Polymers in High‐Mobility Monolayer Transistors via the Dissolution Temperature

It remains a challenge to precisely tailor the morphology of polymer monolayers to control charge transport. Herein, the effect of the dissolution temperature (T_dis) is investigated as a powerful strategy for morphology control. Low T_dis values cause extended polymer aggregation in solution and induce larger nanofibrils in a monolayer network with more pronounced π–π stacking. The field‐effect mobility of the corresponding monolayer transistors is significantly enhanced by a factor of four compared to devices obtained from high T_dis with a value approaching 1 cm² V^?1 s^?1. Besides that, the solution kinetics reveal a higher growth rate of aggregates at low T_dis, and filtration experiments further confirm that the dependence of the fibril width in monolayers on T_dis is consistent with the aggregate size in solution. The generalizability of the T_dis effect on polymer aggregation is demonstrated using three other conjugated polymer systems. These results open new avenues for the precise control of polymer aggregation for high‐mobility monolayer transistors.     

C−C Bond Formation in Syngas Conversion over Zinc Sites Grafted on ZSM‐5 Zeolite

Despite significant progress achieved in Fischer–Tropsch synthesis (FTS) technology, control of product selectivity remains a challenge in syngas conversion. Herein, we demonstrate that Zn²⁺‐ion exchanged ZSM‐5 zeolite steers syngas conversion selectively to ethane with its selectivity reaching as high as 86 % among hydrocarbons (excluding CO₂) at 20 % CO conversion. NMR spectroscopy, X‐ray absorption spectroscopy, and X‐ray fluorescence indicate that this is likely attributed to the highly dispersed Zn sites grafted on ZSM‐5. Quasi‐in‐situ solid‐state NMR, obtained by quenching the reaction in liquid N₂, detects C₂ species such as acetyl (‐COCH₃) bonding with an oxygen, ethyl (‐CH₂CH₃) bonding with a Zn site, and epoxyethane molecules adsorbing on a Zn site and a Brønsted acid site of the catalyst, respectively. These species could provide insight into C?C bond formation during ethane formation. Interestingly, this selective reaction pathway toward ethane appears to be general because a series of other Zn²⁺‐ion exchanged aluminosilicate zeolites with different topologies (for example, SSZ‐13, MCM‐22, and ZSM‐12) all give ethane predominantly. By contrast, a physical mixture of ZnO‐ZSM‐5 favors formation of hydrocarbons beyond C₃₊. These results provide an important guide for tuning the product selectivity in syngas conversion.     

Structure Determination of Alkynyl‐Protected Gold Nanocluster Au22(tBuC≡C)18 and Its Thermochromic Luminescence

An alkynyl‐protected gold nanocluster, Au₂₂(^tBuC≡C)₁₈ ( 1 ), has been synthesized and its structure has been determined by single‐crystal X‐ray diffraction. The molecular structure consists of a Au₁₃ cuboctahedron kernel and three [Au₃(^tBuC≡C)₄] trimeric staples. The cluster 1 has strong luminescence in the solid state with a 15 % quantum yield, and it displays interesting thermochromic luminescence as revealed by temperature‐dependent emission spectra. The enhanced room‐temperature emission is characterized as thermally activated delayed fluorescence.     

Flame retardancy and thermal decomposition behavior of TPU/chitosan composites

The application of chitosan (CS) in new materials is a hot research topic. In this paper, CS was used alone as flame retardant to prepare thermoplastic polyurethane elastomer (TPU) composites. Then, the flame retardancy and thermal decomposition behavior of TPU/CS composites were intensively investigated using cone calorimeter test (CCT), scanning electron microscope (SEM), microscale combustion colorimeter (MCC) test, thermogravimetric analysis/infrared spectrometry (TG‐IR), and gas chromatography‐mass spectrometry (GC‐MS). The results showed that CS can reduce the fire risk of TPU; 2.0‐wt% CS could make the peak value of heat release rate (pHRR) decreased to 457.2 kW/m², reduced by 65.9% compared with TPU. And the peak value of smoke production rate (pSPR) and total smoke release (TSR) of the same sample was decreased by 79.4% and 54.2%, respectively. The TG‐IR and GC‐MS results confirmed that CS could promote TPU decomposition in advance, reacting with the decomposition products of TPU. Therefore, the production of combustible gas was reduced. The GC‐MS results showed that the production of isocyanates and ethers was reduced with the addition of CS. The digital photographs of SEM for the samples after CCT were shown that the char residue layer of the sample containing 2.0‐wt% CS was fibrous in shape. It could be speculated that the thermal decomposition products from TPU could react with CS at low temperature, which reduced the production of flammable gases. So CS had a good prospect in reducing the fire hazard for TPU.     

Enabling High‐Voltage Lithium Metal Batteries by Manipulating Solvation Structure in Ester Electrolyte

Lithium metal is an ideal electrode material for future rechargeable lithium metal batteries. However, the widespread deployment of metallic lithium anode is significantly hindered by its dendritic growth and low Coulombic efficiency, especially in ester solvents. Herein, by rationally manipulating the electrolyte solvation structure with a high donor number solvent, enhancement of the solubility of lithium nitrate in an ester‐based electrolyte is successfully demonstrated, which enables high‐voltage lithium metal batteries. Remarkably, the electrolyte with a high concentration of LiNO₃ additive presents an excellent Coulombic efficiency up to 98.8 % during stable galvanostatic lithium plating/stripping cycles. A full‐cell lithium metal battery with a lithium nickel manganese cobalt oxide cathode exhibits a stable cycling performance showing limited capacity decay. This approach provides an effective electrolyte manipulation strategy to develop high‐voltage lithium metal batteries.     

Photocatalytic Conversion of Waste Plastics into C2 Fuels under Simulated Natural Environment Conditions

Reported here is the first highly selective conversion of various waste plastics into C₂ fuels under simulated natural environment conditions by a sequential photoinduced C?C cleavage and coupling pathway, where single‐use bags, disposable food containers, food wrap films, and their main components of polyethylene, polypropylene, and polyvinyl chloride can be photocatalytically transformed into CH₃COOH without using sacrificial agents. As an example, polyethylene is photodegraded 100 % into CO₂ within 40 h by single‐unit‐cell thick Nb₂O₅ layers, while the produced CO₂ is further photoreduced to CH₃COOH. Various methods and experiments disclose that O₂ and ^.OH radicals trigger the oxidative C?C cleavage of polyethylene to form CO₂, while other investigations show that the yielded CH₃COOH stems from CO₂ photoreduction by C?C coupling of ^.COOH intermediates. This two‐step plastic‐to‐fuel conversion may help to simultaneously address the white pollution crisis and harvest highly valuable multicarbon fuels in natural environments.