贵金属纳米材料的液相合成及其表面等离子体共振性质应用

金属中的表面等离子体共振是描述其导带电子在电磁场作用下集体振荡的一个物理概念。金属纳米颗粒由于其表面等离子体共振性质表现出独特的光学应用。本文在相关研究的基础上,综述了具备表面等离子体共振性质的不同形貌及多种复合结构的贵金属纳米材料的制备和应用,并对其发展及应用前景进行了展望。     

新型亲核NO供体Diazeniumdiolate及其靶向性控释材料

新型亲核NO供体diazeniumdiolate独特的化学结构和性质,使其成为目前NO供体研究的一个热点.要使其成为更有效的药物,它的靶向性和控释性能是当前研究的重点,减小亲核试剂(多胺)的细胞毒性和亚硝胺的生成是研究的难点.本文对增强靶向性释放所采取的三个措施(聚合物控释、特定酶代谢释放和光降解释放)的近十几年国外的研究情况进行了综述.     

脱氢枞胺及其衍生物的研究与应用进展

脱氢枞胺及其衍生物在手性拆分、金属离子浮选、表面活性、杀菌、医药、染料等领域有着重要的用途。本文对脱氢枞胺的制备、脱氢枞胺成盐衍生物以及脱氢枞胺成键衍生物的研究与应用进展进行了综述,并对脱氢枞胺及其衍生物的研究及应用前景进行了展望。     

亚氯酸盐氧化硫脲非缓冲体系的复杂动力学行为

研究了ClO2--SC(NH2)2的非缓冲体系中的动力学行为,发现在开放体系中,体系的铂电极电位和pH呈现反相位连续的大幅度振荡,随着流速的降低,体系行为更加丰富,在高流速的混合模式之后出现了低流速的混合模式;在外部条件变化时,观察到了准周期振荡和倍周期振荡现象;考察了温度、流速、酸度以及反应物的初始浓度比等主要的影响因素,发现分叉参数的变化与体系的行为紧密相关。     

Double Feature Extraction Method of Ship-Radiated Noise Signal Based on Slope Entropy and Permutation Entropy

In order to accurately identify various types of ships and develop coastal defenses, a single feature extraction method based on slope entropy (SlEn) and a double feature extraction method based on SlEn combined with permutation entropy (SlEn&PE) are proposed. Firstly, SlEn is used for the feature extraction of ship-radiated noise signal (SNS) compared with permutation entropy (PE), dispersion entropy (DE), fluctuation dispersion entropy (FDE), and reverse dispersion entropy (RDE), so that the effectiveness of SlEn is verified, and SlEn has the highest recognition rate calculated by the k-Nearest Neighbor (KNN) algorithm. Secondly, SlEn is combined with PE, DE, FDE, and RDE, respectively, to extract the feature of SNS for a higher recognition rate, and SlEn&PE has the highest recognition rate after the calculation of the KNN algorithm. Lastly, the recognition rates of SlEn and SlEn&PE are compared, and the recognition rates of SlEn&PE are higher than SlEn by 4.22%. Therefore, the double feature extraction method proposed in this paper is more effective in the application of ship type recognition.     

烯丙基硅烷的一步法合成研究

采用一步合成方式,将3-溴丙烯与金属镁在以甲苯和供电子溶剂(乙醚或THF)构成的混合溶剂中进行反应,继而与四氯化硅反应,成功合成了四烯丙基硅烷,其产率在乙醚与3-溴丙烯的摩尔比为4(V甲苯/V乙醚=1·1)时达到极值,超过了91%。研究同时发现,选择THF代替乙醚时,同样在THF与3-溴丙烯的摩尔比为4(V甲苯/VTHF=1·7)时产率达到极值(63·12%)。本过程可提高产率,降低成本,是一条好的生产四烯丙基硅烷的路线。     

序线性空间中向量优化问题的K-T型定理

本文在广义凸性条件下,研究实线性空间中一类向量优化问题的最优性条件,我们引入F ritz-John鞍点,、“K-T鞍点”讨论它们与有效解、弱有效解之间的关系.     

Light Intensity and Photoperiod Affect Growth and Nutritional Quality of Brassica Microgreens

We explored the effects of different light intensities and photoperiods on the growth, nutritional quality and antioxidant properties of two Brassicaceae microgreens (cabbage Brassica oleracea L. and Chinese kale Brassica alboglabra Bailey). There were two experiments: (1) four photosynthetic photon flux densities (PPFD) of 30, 50, 70 or 90 μmoL·m⁻²·s⁻¹ with red:blue:green = 1:1:1 light-emitting diodes (LEDs); (2) five photoperiods of 12, 14, 16, 18 or 20 h·d⁻¹. With the increase of light intensity, the hypocotyl length of cabbage and Chinese kale microgreens shortened. PPFD of 90 μmol·m⁻²·s⁻¹ was beneficial to improve the nutritional quality of cabbage microgreens, which had higher contents of chlorophyll, carotenoids, soluble sugar, soluble protein and vitamin C, as well as increased antioxidant capacity. The optimal PPFD for Chinese kale microgreens was 70 μmol·m⁻²·s⁻¹. Increasing light intensity could increase the antioxidant capacity of cabbage and Chinese kale microgreens, while not significantly affecting glucosinolate (GS) content. The dry and fresh weight of cabbage and Chinese kale microgreens were maximized with a 14-h·d⁻¹ photoperiod. The chlorophyll, carotenoid and soluble protein content in cabbage and Chinese kale microgreens were highest for a 16-h·d⁻¹ photoperiod. The lowest total GS content was found in cabbage microgreens under a 12-h·d⁻¹ photoperiod and in Chinese kale microgreens under 16-h·d⁻¹ photoperiod. In conclusion, the photoperiod of 14~16 h·d⁻¹, and 90 μmol·m⁻²·s⁻¹ and 70 μmol·m⁻²·s⁻¹ PPFD for cabbage and Chinese kale microgreens, respectively, were optimal for cultivation.     

Suspension quality and power consumption of the complex multiphase flow field in a draft-tube stirred reactor

Experiment and simulation were used to study the flow fields of a liquid-solid-solid three-phase system in a draft-tube stirred reactor with a six-flat-bladed t...     

单晶金刚石p型和n型掺杂的研究

超宽禁带半导体材料金刚石在热导率、载流子迁移率和击穿场强等方面表现出优异的性质,在功率电子学领域具有广阔的应用前景。实现p型和n型导电是制备金刚石半导体器件的基础要求,其中p型金刚石的发展较为成熟,主流的掺杂元素是硼,但在高掺杂时存在空穴迁移率迅速下降的问题;n型金刚石目前主流的掺杂元素是磷,还存在杂质能级深、电离能较大的问题,以及掺杂之后金刚石晶体中的缺陷造成载流子浓度和迁移率都比较低,电阻率难以达到器件的要求。因此制备高质量的p型和n型金刚石成为研究者关注的焦点。本文主要介绍金刚石独特的物理性质,概述化学气相沉积法和离子注入法实现金刚石掺杂的基本原理和参数指标,进而回顾两种方法进行单晶金刚石薄膜p型和n型掺杂的研究进展,系统总结了其面临的问题并对未来方向进行了展望。