块菌的傅里叶变换红外光谱研究

块菌是珍稀野生食用菌,其蛋白质和糖类含量较高,块菌多糖具有潜在的药用价值。文章利用傅里叶变换红外光谱技术(FTIR)对五种云南野生块菌作了研究。结果表明,块菌属真菌有其独特的光谱特征,全谱最强峰为出现在1 042和1 077 cm-1附近的强双峰。在脂分子的羰基峰1 742 cm-1及糖类异构体的指纹区1 200～750 cm-1,不同种类、不同产地块菌的光谱有明显差异,另外,正常块菌和霉变块菌的光谱亦有明显差异,主要体现在谱峰吸收强度的变化上,部分谱峰吸收强度比的变化表明,块菌样品变质前后,其蛋白质和糖类物质的含量发生了变化。FTIR光谱提供了块菌成分的有关化学信息,为鉴别块菌和区分块菌的种类、质量提供了简便快捷的手段。     

Improved crystal quality of GaN film with the in-plane lattice-matched Ino.17Alo.s3N interlayer grown on sapphire substrate using pulsed metal-organic chemical vapor deposition

We report on an improvement in the crystal quality of GaN film with an Ino.17Alo.83N interlayer grown by pulsed metal-organic chemical vapor deposition, which is in-plane lattice-matched to GaN films. The indium composition of about 17% and the reductions of both screw and edge threading dislocations （TDs） in GaN film with the InA1N interlayer are estimated by high resolution X-ray diffraction. Transmission electron microscopy （TEM） measurements are employed to understand the mechanism of reduction in TD density. Raman and photoluminescence measurements indicate that the InA1N interlayer can improve the crystal quality of GaN film, and verify that there is no additional residual stress induced into the GaN film with InA1N interlayer. Atomic force microscopy measurement shows that the InA1N interlayer brings in a smooth surface morphology of GaN film. All the results show that the insertion of the InA1N interlayer is a convenient method to achieve excellent crystal quality in GaN epitaxy.     

圆窗片表面次级电子倍增效应的数值模拟

基于Monte Carlo模拟算法, 建立了粒子输运模型, 通过对盒形窗内圆窗片表面次级电子倍增现象进行数值仿真, 获得了TE₁₁模非均匀分布电场作用下次级电子倍增的规律. 结果表明: 在微波输入端, 指向窗片表面的磁场力起到了维持次级电子与窗片碰撞的作用, 在电场强度较高的区域倍增剧烈, 有质动力对倍增无贡献; 在微波输出端, 受背离窗片表面磁场力的影响, 在表面静电场较弱的情况下, 次级电子倍增不能发生; 当表面静电场足以维持单面倍增的发生, 随着传输功率的增大, 电子渡越时间增长, 有质动力使得倍增强烈的区域由强电场区逐渐转移到弱电场区域. 对利用外静电场抑制微波输入端次级电子倍增效应的方法进行了数值模拟验证. 关键词： 圆窗片 11模')" href="#">TE₁₁模 次级电子倍增 MonteCarlo模拟     

核动力航空推进探析

文献调研国外核动力航空推进相关技术研究,美国GE与PW公司通过ANP计划已试验验证了核动力航空推进的可行性;分析认为核动力航空推进当前最佳用途是长航时无人机与巡航导弹动力,关键技术是核屏蔽的轻量化设计、热交换效率与速率、热力系统设计与新型结构问题;核动力航空推进若采用蒸汽介质的二回路闭式循环驱动螺旋桨,蒸汽透平及动力系统设计没有技术障碍,闭式循环蒸汽流量关键取决于蒸汽透平汽耗率与热交换循环时间。     

The influence of thermally assisted tunneling on the performance of charge trapping memory

We evaluate the influence of the thermally assisted tunneling (TAT) mechanism on charge trapping memory (CTM) cell performance by numerical simulation, and comprehensively analyse the effects of the temperature, trap depth, distribution of trapped charge, gate voltage and parameters of TAT on erasing/programming speed and retention performance. TAT is an indispensable mechanism in CTM that can increase the detrapping probability of trapped charge. Our results reveal that the TAT effect causes the sensitivity of cell performance to temperature and it could affect the operational speed, especially for the erasing operation. The results show that the retention performance degrades compared with when the TAT mechanism is ignored.     

Scaling properties of phase-change line memory

Phase-change line memory cells with different line widths are fabricated using focused-ion-beam deposited C-Pt as a hard mask. The electrical performance of these memory devices was characterized. The current-voltage (I-V ) and resistance-voltage (R-V ) characteristics demonstrate that the power consumption decreases with the width of the phase-change line. A three-dimensional simulation is carried out to further study the scaling properties of the phase-change line memory. The results show that the resistive amorphous (RESET) power consumption is proportional to the cross-sectional area of the phase-change line, but increases as the line length decreases.     

Defect modes tuning of one-dimensional photonic crystals with lithium niobate and silver material defect

In this paper, a novel PCs defect mode is designed by inserting a Ag/LiNbO₃/Ag sandwich structure into periodically stacked TiO₂/MgF₂ dielectric superlattice. The band gap calculation is conducted using transfer matrix method. An emergence of defect mode around 525 nm is demonstrated. By applying an external voltage on this defect mode, remarkable wavelength tuning can be achieved. At normal incidence, a tuning bandwidth up to 70 nm is obtained by moderate change of external voltage from −250 to 250 V. This feature can be employed to fabricate practical tunable filters in visible region.     

复杂混合溶液成分高光谱分析的可行性

采用高光谱技术对复杂混合溶液进行检测分析,同时利用被测物质的吸光度和散射特性信息以提高光谱的信噪比。实验设计了高光谱采集装置,采集生物组织模拟液(Intralipid-10%)的漫反射高光谱图像,并用Monte Carlo方法和漫射近似理论对其进行了正向和反向推导,获得了632nm波长下,Intralipid-10%吸收系数为0.002 0cm-1,与标准参数相对误差为11.1%;约化散射系数为63.35cm-1,与标准参数相对误差为6.49%,基本符合标准参数的误差范围,验证了该高光谱检测系统的准确性。还利用该高光谱系统对不同厂家出品的牛奶、果汁等样本进行了高光谱采集,得到不同样本间差异较传统二维光谱更为明显的结果,充分证明了高光谱方法在复杂混合溶液成分分析中具有很强的可行性。     

大管径油气两相流流型变化机理的研究

本文对大直径水平和不同倾角的倾斜管道内油气混输流动的流型及流行转换进行了研究,探讨大直径油气混输管道不同倾斜度油气两相流动过程中段塞流的形成机理。在大型多相流流动模拟实验装置上,模拟油气在大直径管道内的混输流动。通过改变倾斜角度,研究倾角分别为1°、5°以及10°下的油气两相流流型及流型转换的特性,实验结果表明,倾斜角度对段塞流流型的产生及其变化影响显著。     

周视大像旋稳海天线向量角补偿算法

为使两轴周视光电探测系统在三自由度扰动和大像旋条件下搜索并跟踪水面目标,在虚拟天际线焦平面像五自由度解析表达式基础上,推导出焦平面坐标系铅直轴的方向向量和该坐标系下海天出射平面法向量夹角的余弦表达式.该式求反余弦后减π/2,得到焦平面铅直坐标轴的方向向量和海天出射平面法向量小于π/2的夹角,该夹角的0.5倍作为俯仰反射镜的净作动量,目的是克服非线性像旋使包含目标信息的虚拟海天线的像线通过焦平面中心.该算法与方位补偿算法联动能够使目标像点始终逼近焦平面原点.通过数学模型仿真和真实工况试验都验证了俯仰机构位置环海天线向量角补偿算法的合理性.