Two salts of 5‐sulfosalicylic acid and 3‐aminopyridine

5‐Sulfosalicylic acid (5‐SSA) and 3‐aminopyridine (3‐APy) crystallize in the same solvent system, resulting in two kinds of 1:1 proton‐transfer organic adduct, namely 3‐aminopyridinium 3‐carboxy‐4‐hydroxybenzenesulfonate monohydrate, C₅H₇N₂⁺·C₇H₅O₆S⁻·H₂O or 3‐APy·5‐SSA·H₂O, (I), and the anhydrous adduct, C₅H₇N₂⁺·C₇H₅O₆S⁻ or 3‐APy·5‐SSA, (II). Both compounds have extensively hydrogen‐bonded three‐dimensional layered polymer structures, with interlayer homo‐ and heterogeneous π–π interactions in (I) and (II), respectively.     

Linear alkyl benzene sulphonate (LAS) degradation by immobilized Pseudomonas aeruginosa under low intensity ultrasound

We studied the LAS degradation of immobilized Pseudomonas aeruginosa with low-intensity ultrasonic and the influence of original LAS concentration, pH, rotary velocity and different conditions of low-intensity ultrasonic irradiation on the degradation of LAS. In our experiment, the degradation rate of LAS was the main index. We found that low-intensity ultrasonic irradiation could improve the metabolism of microorganism cells and promote the LAS biodegradation of immobilized cells. In the experiment, 50 mg/l LAS were used to simulate wastewater, and low-intensity ultrasonic was considered. We found the influence was obvious, and the optimal degradation rate was acquired when the conditions of ultrasonic were frequency 24 kHz, power 8 W, stimulation time 5 s, intermissive time 30 s, and total time 10 min. The LAS degradation rate of immobilized cells with ultrasonic were respectively 40% and 9.5% higher than that of the suspending cells and immobilized cells without irradiation.     

全硅MCM-41担载的加氢脱硫催化剂的TPR研究

用TRP技术研究了以全硅MCM-41(Si-MCM-41)和HNO3交换的全硅MCM-41(H-MCM-41)为载体制备的Ni-Mo、Co-Mo和Ni-W加氢脱硫(HDS)催化剂的还原性能，并以0．8(wt)％二苯并噻吩(DBT)的十氢萘溶液为模型化合物，在高压固定床反应器上考察了上述催化剂的加氢脱硫(HDS)反应性能。结果表明，Si-MCM-41经稀HNO3交换后，所担载的Ni-Mo和Ni-W催化剂还原性能、HDS活性和加氢活性有显著变化，但对Co-Mo催化剂影响不大。这说明在Ni-Mo／H-MCM-41和Ni-W／H-MCM-41中可能存在氢溢流现象，DBT的HDS活性与载体表面酸性和氢溢流有关。     

关于超高分子量聚丙烯超拉伸膜的结构性能的研究——Ⅱ.形态结构变化对力学性能的影响

用X-射线衍射、动态力学测定等手段研究了不同拉伸倍数的超高分子量聚丙烯薄膜的力学性能的变化.以X-射线衍射法并基于串联力学模型的假设得到的各样品的表观晶区模量E_c~(app)约为34-38GPa.样品模量E_b随拉伸倍数增加而逐渐增大,其变化趋势与非晶区取向因子的变化相类似,说明非晶区取向是左右样品模量的重要因素.室温下,69倍拉伸样品的模量为27GPa,约为表观结晶模量的3/4,且其值在-150-160℃的温度范围内没有急剧变化,说明超拉伸明显改善了材料的力学性能及热稳定性.在各拉伸样品中,考虑伸直链结晶生成的可能性,利用并串联力学模型对伸直链结晶的体积分数做了估算,并对X-射线衍射法所得表观结晶模量进行了修正,认为室温下聚丙烯的真正晶区模量约为47GPa.     

Preparation of [5,6]- and [6,6]-oxahomofullerene derivatives and their interconversion by Lewis acid assisted reactions of fullerene mixed peroxides

[60]Fullerene mixed peroxides C60(O)(OOtBu)4 exhibit chemo- and regioselective reactions under mild conditions. The epoxy moiety is opened by ferric chloride to form vicinal hydroxy chloride C60Cl(OH)(OOtBu)4. BF3 is also effective in opening the epoxy moiety. The O-O bond of the fullerene mixed peroxide is cleaved by aluminum chloride to form both [5,6]- and [6,6]-fullerene hemiketals (oxohomo[60]fullerenes). A Hock-type rearrangement is proposed for the formation of the hemiketals, in which a fullerene C-C bond is cleaved. Lewis acids and/or visible light can initiate isomerization of the hemiketal isomers. Single-crystal X-ray analysis and theoretical calculations confirmed the results.     

聚1-氨基蒽醌在二次锂电池正极材料中的应用

采用化学方法合成聚1-氨基蒽醌并用于二次锂电池正极材料,通过红外光谱、扫描电镜、粒度测试、循环伏安以及充放电测试等方法对材料的官能团结构、微观形貌、颗粒大小以及电化学性能等进行了研究与分析.实验表明,与金属锂组成二次锂电池后,聚1-氨基蒽醌达到了218.3 mAh•g－1的首次放电容量,经过25次循环后仍可保持较高的充放电效率.由于材料具有较高的能量密度且不含对环境有污染的元素S,因此是二次锂电池非常有希望的正极材料.     

Complexes formed between nitrilotris(methylenephosphonic acid) and M(2+) transition metals: isostructural organic-inorganic hybrids

Nitrilotris(methylenephosphonic acid) (NTP, [N(CH(2)PO(3)H(2))(3)]) recently has been found to form three-dimensional porous structures with encapsulation of templates as well as layered and linear structures with template intercalation. It was, therefore, of interest to examine the type of organic-inorganic hybrids that would form with metal cations. Mn(II) was found to replace two of the six acid protons, while a third proton bonds to the nitrilo nitrogen, forming a zwitter ion. Two types of compounds were obtained. When the ratio of acid to Mn(II) was less than 10, a trihydrate, Mn[HN(CH(2)PO(3)H)(3)(H(2)O)(3)] (2) formed. Compound 2 is monoclinic P2(1)/c, with a = 9.283(2) A, b = 16.027(3) A, c = 9.7742(2) A, beta = 115.209(3) degrees, V = 1315.0(5) A(3), and Z = 4. The Mn atoms form zigzag chains bridged by two of the three phosphonate groups. The third phosphonate group is only involved in hydrogen bonding. The metal atoms are octahedrally coordinated with three of the sites occupied by water molecules. Adjacent chains are hydrogen-bonded to each other through POH and HN donors, and the additional participation of all the water hydrogens in H-bonding results in a corrugated sheet-like structure. Use of excess NTP at a ratio to metal of 10 to 1 yields an anhydrous compound Mn[HN(CH(2)PO(3)H)(3)] (1), P2(1)/n, a = 9.129(1) A, b = 8.408(1) A, c = 13.453(1) A, beta = 97.830(2) degrees, V = 1023.0(2) A(3), and Z = 4. Manganese is five coordinate forming a distorted square pyramid with oxygens from five different phosphonate groups. The sixth oxygen is 2.85 A from an adjacent Mn, preventing octahedral coordination. All the protonated atoms, three phosphonate oxygens and N, form moderately strong hydrogen bonds in a compact three-dimensional structure. The open-structured trihydrate forms a series of isostructural compounds with other divalent transition metal ions as well as with mixed-metal compositions. This is indicative that the hydrogen bonding controls the type of structure formed irrespective of the cation.     

The Chemical Speciation and Behavior of Mercury and Selenium in the Insoluble Fraction of Striped Dolphin Liver

Most of the mercury and selenium exist in the insoluble fraction of dolphin liver. After the insoluble fraction was digested by alkaline protease in the presence of 1% SDS, approximately 50% of Hg and Se consisted in the supernatant and the others in the residue. Gel filtration chromatography of the hydrolysate showed that 96% of Hg and 87% of Se were combined with the high molecular weight proteins stably, which cannot be substituted by the complex reagents.Mercury and selenium in the residue were confirmed as HgSe crystal.     

Predictions of moiré excitons in twisted two-dimensional organic–inorganic halide perovskites

Recent breakthrough in synthesizing arbitrary vertical heterostructures of Ruddlesden–Popper (RP) perovskites opens doors to myriad quantum optoelectronic applications. However, it is not clear whether moiré excitons and flat bands can be formed in such heterostructures. Here, we predict from first principles that twisted homobilayers of RP perovskite, MA₂PbI₄, can host moiré excitons and yield flat energy bands. The moiré excitons exhibit unique and hybridized characteristics with electrons confined in a single layer of a striped distribution while holes localized in both layers. Nearly flat valence bands can be formed in the bilayers with relatively large twist angles, thanks to the presence of hydrogen bonds that strengthen the interlayer coupling. External pressures can further increase the interlayer coupling, yielding more localized moiré excitons and flatter valence bands. Finally, electrostatic gating is predicted to tune the degree of hybridization, energy, position and localization of moiré excitons in twisted MA₂PbI₄ bilayers.

Excitonic states in twisted MA₂PbI₄ bilayers were calculated by first-principles calculations.     

Low-temperature growth and photoluminescence property of ZnS nanoribbons

At a low temperature of 450 degrees C, ZnS nanoribbons have been synthesized on Si and KCl substrates by a simple chemical vapor deposition (CVD) method with a two-temperature-zone furnace. Zinc and sulfur powders are used as sources in the different temperature zones. X-ray diffraction (XRD), selected area electron diffraction (SEAD), and transmission electron microscopy (TEM) analysis show that the ZnS nanoribbons are the wurtzite structure, and there are two types-single-crystal and bicrystal nanoribbons. Photoluminescence (PL) spectrum shows that the spectrum mainly includes two parts: a purple emission band centering at about 390 nm and a blue emission band centering at about 445 nm with a weak green shoulder around 510 nm.