Trace lead measurement and on-line removal of matrix interference in seawater by isotope dilution coupled with flow injection and ICP-MS

Isotope dilution analysis method coupled with flow injection and inductively coupled plasma mass spectrometry (ID-FI-ICP-MS), enabled trace lead concentration in seawater to be determined and the high salt concentration in the matrix, such as Na⁺, Ca²⁺ and Mg²⁺, to be removed on-line. The operational parameters of the FI system including pH for the chelating reaction, concentration of 8-hydroxyquinoline-5-sulfonic acid (8-HQS), sample loading time and injection speed, washing time and speed, eluting acid concentration and eluting speed, and instrumental parameters for ICP-MS were optimized and selected. Accurate results could be achieved because the isotope ratios required can be precisely measured in the range of the eluting peak by means of ID-FI-ICP-MS. The 3σ detection limit was 0.204 ng ml⁻¹. The trace lead concentration of seawater in south Xiamen, China was 0.988 ± 0.039 ng ml⁻¹. The recoveries of spiked Pb standard in seawater and standard reference water (GBW 08607) were 97.9 and 101.0%, respectively, with a relative standard deviation of 0.98%. This method can be used to determine trace lead concentration in high salt matrix samples, and is especially useful when the eluting peaks do not have a Gaussian-distribution.     

Lycopodine‐Type Lycopodium Alkaloids from Huperzia serrata

Eleven Lycopodium alkaloids with a lycopodine‐type skeleton were isolated from the basic material of the whole plant of Huperzia serrata (Thunb .) Trev. (Huperziaceae). Among them, 12‐epilycodoline N‐oxide (=(12α,15R)‐12‐hydroxy‐15‐methyllycopodan‐5‐one N‐oxide; 1 ), 7‐hydroxylycopodine (=(15S)‐7‐hydroxy‐15‐methyllycopodan‐5‐one; 2 ), and 4,6α‐dihydroxylycopodine (=(6α,15R)‐4,6‐dihydroxy‐15‐methyllycopodan‐5‐one; 3 ) are new compounds. Their structures were identified spectroscopically, especially by means of 1D‐ and 2D‐NMR.     

bPAK-interacting exchange factor may regulate actin cytoskeleton through interaction with actin

p21-activated kinase (PAK)-interacting exchange factor (PIX) is known to be involved in regulation of Cdc42/Rac GTPases and PAK activity. PIX binds to the proline-rich region of PAK, and regulates biological events through activation of Cdc42/Rac GTPase. To further investigate the role of PIX we produced monoclonal antibodies (Mab) against bPIX. Three clones; N-C6 against N-terminal half and C-A3 and C-B7 against C- terminal half of bPIX were generated and characterized. N-C6 Mab detected bPIX as a major band in most cell lines. C-A3 Mab recognizes GIT-binding domain (GBD), but it does not interfere with GIT binding to bPIX. Using C-A3 Mab possible bPIX interaction with actin in PC12 cells was examined. bPIX Mab (C-A3) specifically precipitated actin of the PC12 cell lysates whereas actin Mab failed to immunoprecipitate bPIX. Co-sedimentation of PC12 cell lysates with the polymerized F-actin resulted in the recovery of most of bPIX in the cell lysates. These results suggest that bPIX may not interact with soluble actin but with polymerized F-actin and revealed that bPIX constitutes a functional complex with actin. These data indicate real usefulness of the bPIX Mab in the study of bPIX role(s) in regulation of actin cyoskeleton.     

Synthesis of (±)‐Kempa‐6,8‐dien‐3‐ol (=(2aRS,3SR,4aSR,7RS,7aSR,10bSR,10cSR)‐2,2a,3,4,4a,5,6,7,7a,8,10b,10c‐Dodecahydro‐2a,7,10,10c‐tetramethylnaphth[2,18‐cde]azulen‐3‐ol)

The synthesis of kempa‐6,8‐dien‐3β‐ol ( 4a ), as a synthetic leading model of the natural product 4b , was carried out starting from intermediate 12 , the synthetic route of which has been developed previously (Scheme 1). The conversion of 12 to the model compound 4a involved the elaboration of three structure modifications by three processes, Tasks A, B, and C (see Scheme 2). Task A was achieved by epoxy‐ring opening of 41 with Me₃SiCl (Scheme 9), and Task B being performed by oxidation at the 13‐position, followed by hydrogenation, and then epimerization (Schemes 4 and 5). The removal of the 2‐OH group from 12 (Task C) was achieved via 30b according to Scheme 6, whereby 30b was formed exclusively from 30a / 31a 1 : 1 (Scheme 7). In addition, some useful reactions from the synthetic viewpoint were developed during the course of the present experiments.     

Synthesis of 2‐Dihydrooxadiazolinyl Chromones

Reactions of the substituted 2‐formyl chromones with aroylhydrazines gave corresponding 2‐(aroylhydrazonomethylidyne) chromones. Then 2‐(3′‐acetyl‐5′‐aryl‐2′,3′‐dihydro‐1′,3′,4′‐oxadiazol‐2′‐yl) chromones were prepared by these 2‐(aroylhydrazonomethylidyne) chromones under refluxing with Ac₂O. All target compounds were characterized through elemental analysis and IR, ¹H NMR, MS.     

Effective isolation of magnesium lithospermate B and its inhibition of aldose reductase and fibronectin on mesangial cell line

We developed an effective isolation method of magnesium lithospermate B from Salviae miltiorrhizae Radix and found for the first time that magnesium lithospermate B shows strong in vitro inhibition (IC50=0.04 microM) of aldose reductase (AR), 2.5 times than that of clinically used epalrestat (IC50=0.1 microM) and accumulation of fibronectin dose dependently.     

Polyterephthalamides with naphthoxy‐pendent groups

A series of new aromatic polyamides having pendent naphthoxy groups were synthesized by the triphenyl phosphite‐activated polycondensation of (2‐naphthoxy)terephthalic acid (NOTPA) with various aromatic diamines in a medium consisting of N‐methyl‐2‐pyrrolidone (NMP), pyridine, and calcium chloride. The diacid monomer NOTPA was prepared from the nitro displacement of dimethyl 2‐nitroterephthalate with the potassium naphthoxide of β‐naphthol, followed by base‐induced ester hydrolysis. All the resulting polymers were noncrystalline and readily soluble in aprotic polar solvents such as NMP and N,N‐dimethylacetamide. Almost all the polymers could be solution‐cast to tough, creasable amorphous films with good mechanical properties, the values of tensile strengths ranging from 90 to 124 MPa with initial moduli ranging from 1.72 to 2.51 GPa. Except for two examples, all the other polyamides displayed discernible glass transitions between 189 and 248 °C in the differential scanning calorimetric traces. These polyamides showed insignificant decomposition below 400 °C in nitrogen or air. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1781–1789, 2002     

Packed capillary column supercritical fluid chromatography of fat-soluble vitamins using liquid crystal polysiloxane coated particles

Summary Liquid crystal polysiloxane stationary phases were prepared by coating two different polymers on deactivated porous silica particles (10 m diameter, 80 Å pores). Deactivation of the silica particles before coating was necessary to prepare highly efficient and inert stationary phases for supercritical fluid chromatography (SFC). Fat-soluble vitamins E, A, K₁, K₂, D₂, and D₃ were separated on these columns using neat supercritical CO₂ as mobile phase. The analyses were completed within 40 min at 70 °C. The results were compared to those obtained using a capillary column packed with less ordered liquid crystalm,m-cyanobiphenyl-substituted polysiloxane coated particles. Reduced shape selectivity was observed with this cyanobiphenyl phase. The response factors of vitamins A, E, K₁, K₂, D₂, and D₃ when using the flame ionization detector (FID) were determined to be very similar.     

Suzuki-Miyaura coupling reaction of aryl chlorides using di(2,6-dimethylmorpholino)phenylphosphine as ligand

Suzuki-Miyaura coupling was achieved on a variety of aryl chlorides by using di(2,6-dimethylmorpholino)phenylphosphine (L1) as a bulky electron-rich monoaryl phosphine ligand. We report the couplings of various chlorobenzenes and heteroaryl chlorides.     

Low-valent chemistry of cobalt amide. Synthesis and structural characterization of cobalt(II) amido, aryloxide, and thiolate compounds

The binuclear cobalt(II) amide complex [(CoL2)2-(TMEDA)] (1) [L = N(Si(t)BuMe2)(2-C5H3N-6-Me); TMEDA = Me2NCH2CH2NMe2] has been synthesized by the reaction of anhydrous CoCl2 with 2 equiv of [Li(L)(TMEDA)]. X-ray crystallography revealed that complex 1 consists of two [CoL2] units linked by one TMEDA ligand molecule, which binds in an unusual N,N'-bridging mode. Protolysis of 1 with the bulky phenol Ar(Me)OH (Ar(Me) = 2,6-(t)Bu2-4-MeC6H2) and thiophenol ArSH (Ar = 2,4,6-(t)Bu3C6H2) gives the neutral monomeric cobalt(II) bis(aryloxide) [Co(OAr(Me))2(TMEDA)] (2) and dithiolate [Co(SAr)2(TMEDA)] (3), respectively. Complexes 1-3 have been characterized by mass spectrometry, microanalysis, magnetic moment, and melting-point measurements, in addition to X-ray crystallography.