A high-order tangential basis algorithm for electromagnetic scattering by curved surfaces

We describe, analyze, and demonstrate a high-order spectrally accurate surface integral algorithm for simulating time-harmonic electromagnetic waves scattered by a class of deterministic and stochastic perfectly conducting three-dimensional obstacles. A key feature of our method is spectrally accurate approximation of the tangential surface current using a new set of tangential basis functions. The construction of spectrally accurate tangential basis functions allows a one-third reduction in the number of unknowns required compared with algorithms using non-tangential basis functions. The spectral accuracy of the algorithm leads to discretized systems with substantially fewer unknowns than required by many industrial standard algorithms, which use, for example, the method of moments combined with fast solvers based on the fast multipole method. We demonstrate our algorithm by simulating electromagnetic waves scattered by medium-sized obstacles (diameter up to 50 times the incident wavelength) using a direct solver (in a small parallel cluster computing environment). The ability to use a direct solver is a tremendous advantage for monostatic radar cross section computations, where thousands of linear systems, with one electromagnetic scattering matrix but many right hand sides (induced by many transmitters) must be solved.     

An improved transmission line laser model for multimode laser diodes incorporating thermal effects

An improved transmission line model to study the thermal effects in semiconductor laser diodes is reported in this paper. The temperature effects in the laser characteristics are obtained by incorporating temperature dependent gain and carrier density equations for the laser cavity. These primary factors are introduced in the regular transmission line laser model to estimate the static and dynamic characteristics of an 1.3μm InGaAsP double heterostructure laser diode. The results show good agreement with the experimental observation and solution of rate equations referred in the literature. The key feature of this model is that it provides the laser spectra at various temperatures. Based on the model, time dependent evolution of optical spectrum, temperature dependent optical output and frequency chirp are evaluated. Further the distribution of photon and electron density within the cavity is also determined.     

Microporous Hypercross-linked Conjugated Quinonoid Chromophores of Anthracene: Novel Polymers for CO2 Adsorption

Microporous hypercross-linked conjugated quinonoid chromophores represent a novel class of amorphous polymers, synthesized by the reaction of anthracene with dimethoxy methane in the presence of FeCl3 catalyst. Their N2 adsorption isotherms confirm their microporous nature. Diffuse reflectance UV-Visible(DRS UV-Vis) spectroscopy confirms their matrix built with the conjugated quinonoids by their broad light absorption characteristics extending from 1000 nm to 200 nm with the absorbance maximum close to 400 nm. The catalyst cross-linked anthracene with ―CH2― bridges and subsequently dehydrogenating them to form quinonoids. Their Fourier transform infrared(FTIR) spectra showed their characteristic quinonoid vibrations between 1600 and 1700 cm-1. The synthesis of polymers was carried out at 30, 40, 50, 60, 70 and 80 ℃, but the quinonoid content of the polymer obtained at 80 ℃ was higher than that of the others. Their scanning electron microscopy(SEM) images showed microspheres of 1 to 5 μm size built with tiny particles. Their surfaces were not smooth. The polymer synthesized at 80 ℃ showed 5.1 wt% CO2 sorption at 25 ℃ and 0.1 MPa, but when it was recross-linked, the CO2 sorption increased to 8 wt%. Hence, hypercross-linked conjugated quinonoid chromophores of anthracene are good for sorption of CO2.     

Solutions with concentration for conservation laws with discontinuous flux and its applications to numerical schemes for hyperbolic systems

Measure-valued weak solutions for conservation laws with discontinuous flux are proposed and explicit formulae have been derived. We propose convergent discontinuous flux-based numerical schemes for the class of hyperbolic systems that admit nonclassical -shocks, by extending the theory of discontinuous flux for nonlinear conservation laws to scalar transport equation with a discontinuous coefficient. The article also discusses the concentration phenomenon of solutions along the line of discontinuity, for scalar transport equations with a discontinuous coefficient. The existence of the solutions for transport equation is shown using the vanishing viscosity approach and the asymptotic behavior of the solutions is also established. The performance of the numerical schemes for both scalar conservation laws and systems to capture the -shocks effectively is displayed through various numerical experiments.     

Facile access to polymer supported zinc–salen complex: highly efficient heterogeneous catalyst for synthesizing hydantoins,thiohydantoins and Schiff bases in aqueous medium

Research on Chemical Intermediates - The synthesis of polymer supported zinc–salen complex (PS-Zn–salen) is described. The mononuclear zinc(II)–salen complex was characterized by...     

Synthesis of polyhydroxy piperidines and their analogues: a novel approach towards selective inhibitors of alpha-glucosidase

Various polyhydroxy piperidine azasugars have been synthesized from precursors 18a and 18b, obtained in both enantiomeric forms from d-ribose. Out of these polyhydroxy piperidine azasugars, 22, 39 and 20 were found to be potent as well as selective inhibitors of alpha-glucosidase with K(i) values ranging as low as 1.07 microM, 16.4 microM, and 88.2 microM, respectively. Replacement of the hydroxy methylene moiety of (K(i) 33% at 1 mM) by an amino methylene moiety (32, K(i) 36.8 microM) showed a remarkable increase in the activity (almost 30 times). Furthermore, increasing the lipophilicity of by N-alkylation with a dodecyl group (36) showed a three-fold enhancement in the activity (K(i) 217 microM to K(i) 72.3 microM).     

Surface passivation of MgAl2O4 spinel powder by chemisorbing H3PO4 for easy aqueous processing

A stoichiometric MgAl 2O 4 spinel (MAS) powder was synthesized by heat treating at 1400 degrees C for 2 h a compacted mixture of alpha-Al 2O 3 and calcined caustic MgO, followed by crushing and milling. The surface of this powder was then passivated against hydrolysis with H 3PO 4 and Al(H 2PO 4) 3 in an ethanol solution. The as-passivated powder could then be dispersed in water using tetramethylammonium hydroxide (TMAH) and an ammonium salt of poly(acrylic acid) (Duramax D-3005) as dispersing agents and gelcast to form green consolidates with relatively high strength (>15 MPa). The good dispersing behavior of the passivated powder in water was confirmed by the low viscosity of its suspension containing 41-45 vol % solids, demonstrating the viability of replacing organic solvents by water in colloidal processing of MAS-based ceramics. The Fourier transform infrared (FT-IR), X-ray diffraction (XRD), and energy dispersive X-ray (EDAX) studies revealed that only negligible amounts of phosphate ions at the surface are required to effectively protect the powder from reacting with water.     

Ex Vivo and In Vitro Studies on the Cytotoxicity and Immunomodulative Properties of Poly(2‐isopropenyl‐2‐oxazoline) as a New Type of Biomedical Polymer

Poly(2‐alkenyl‐2‐oxazoline)s are promising functional polymers for a variety of biomedical applications, such as drug delivery systems, peptide conjugates, or gene delivery. In this study, poly(2‐isopropenyl‐2‐oxazoline) (PIPOx) is prepared through free‐radical polymerization initiated with azobisisobutyronitrile. Reactive 2‐oxazoline units in the side chain support an addition reaction with different compounds containing a carboxylic group, which facilitates the preparation of polymers labeled with two different fluorescent dyes. The cytotoxicities of 2‐oxazoline monomers, PIPOx, and fluorescently labeled PIPOx are evaluated in vitro using an 3‐(4,5‐Dimethyldiazol‐2‐yl)‐2,5‐diphenyl tetrazolium bromide assay and ex vivo using a cell proliferation assay with adenosine triphosphate bioluminescence. The cell uptake of labeled PIPOx is used to determine the colocalization of PIPOx with cell organelles that are part of the endocytic pathway. For the first time, it is shown that poly(2‐isopropenyl‐2‐oxazoline) is a biocompatible material and is suitable for biomedical applications; further, its immunomodulative properties are evaluated.