Synthesis, structure and catalytic properties of [Cp*Cr(C6F5)(Bn)(THF)] toward ethylene in the presence of AlEt3

Treatment of [Cp*CrCl(C₆F₅)]₂ with BnMgCl (Bn = benzyl) in Et₂O/THF affords [Cp*Cr(C₆F₅)(Bn)(THF)] (1) which has been isolated in 72% yield. This compound whose magnetic moment is equal to of 4.037 μ_B has been characterized by NMR and single crystal X-ray analysis. Compound 1 alone does not polymerize ethylene when dissolved in toluene. However, addition of excess AlEt₃ to a solution of 1 in toluene leads to a catalytically active system which readily oligomerizes ethylene under standard conditions. Oligomerization experiments carried out with [1] = 10⁻³ M and [AlEt₃] = 9 × 10⁻² M for 15 min lead to the production of ethylene oligomers with an activity of 280 kg mol Cr⁻¹ h⁻¹. The experimental molecular weight distribution observed at intermediate times during the reaction is satisfactorily accounted for by the Poisson distribution formula, which is indicative of a living polymerization system. These observations are in agreement with a catalytic cycle in which the growing alkyl chain is transferred from chromium to aluminum via a bimetallic complex in which the chromium and aluminum centers are bridged by an alkyl group and the growing polymer chain.     

A molecular beam study of the NO + CO reaction on Pd(111) surfaces

Nitric oxide (NO) reduction with carbon monoxide (CO) on the Pd(111) surface was studied under isothermal conditions by molecular beam techniques as a function of temperature, NO:CO beam composition, and beam flux. Systematic experiments were performed under transient and steady state conditions. Displacement of adsorbed CO by NO in the transient state of the reaction was observed at temperatures between 375 and 475 K for all the NO:CO compositions studied. NO accumulation occurs on Pd(111) surface under steady state conditions, below 475 K, due to stronger chemisorption of NO. The steady state reaction rates attain a maximum at about 475 K, nearly independent of beam composition. N2 was found to be the major product of the reduction, along with a minor production of N2O. The production of N2 and N2O indicates molecular and dissociative adsorption of NO on Pd(111) at temperatures up to 525 K. Postreaction TPD measurements were performed in order to determine the nitrogen coverage under steady-state conditions. Finally, the results are discussed with respect to the rate-controlling character of the different elementary steps of the reaction system.     

Schiff bases of nickel(II), copper(II) porphyrins and dibenzo-18-crown-6 interspersed bis -metal porphyrins. Protonation studies

Schiff-base (SB) derivatives of Ni(II) and Cu(II) porphyrins endowed with various amine functions (R−NH₂),n-butylamine,p-anisidine andm-nitroaniline have been prepared from corresponding formyl porphyrins. Protonation studies of these SB derivatives reveal a marked red shift of the optical absorption bands in the visible region relative to the unprotonated imines. The magnitude of the observed red shifts in the protonated derivatives, (SBH⁺) are found to depend on the electron-withdrawing or electron-donating nature of the R group of the amines. The results of the optical absorption,¹H NMR, EPR, and cyclicovoltammetric studies are illustrative of the fact that protonation of the SB derivatives results in a localized positive charge, in the periphery of the porphyrin (p) system. The dibenzo-18-crown-6 interspersedbisporphyrin schiff bases have been prepared fromtrans 4,4′-diamino dibenzo-18-crown-6 and formyl porphyrins. The protonation of these SB derivatives is found to proceed in a concerted fashion. The cation complexation studies by the crown ether entity in thebisporphyrin systems have been investigated using optical absorption, magnetic resonance and electrochemical methods. The redox characteristics of the protonated dimeric SB porphyrins reveal that the first oxidation step involves a two-electron transfer reaction. This is important in view of their possible usage in multielectron transfer reactions of biological and catalytic interest.     

Theoretical studies on the mechanism of acid-promoted hydrolysis of N-formylaziridine in comparison with formamide

[reaction: see text] We present an ab initio study of the acid-promoted hydrolysis reaction mechanism of N-formylaziridine in comparison with formamide. Since the rate of amide hydrolysis reactions depends on the formation of the tetrahedral intermediate, we focused our attention mainly on the reactant complex, the tetrahedral intermediate, and the transition state connecting these two stationary points. Geometries were optimized using the density functional theory, and the energetics were refined using ab initio theory including electron correlation. Solvent effects were investigated by using polarizable continuum method calculations. The proton-transfer reaction between the O-protonated and N-protonated amides was investigated. In acidic media, despite that the N-protonated species is more stable than the O-protonated one, it is predicted that both N-protonated and O-protonated pathways compete in the hydrolysis reaction of N-formylaziridine.     

Investigation of the use of B3LYP zero-point energies and geometries in the calculation of enthalpies of formation

The use of B3LYP/6–31G^* zero-point energies and geometries in the calculation of enthalpies of formation has been investigated for the enlarged G2 test set of 148 molecules [J. Chem. Phys. 106 (1997) 1063]. A scale factor of 0.96 for the B3LYP zero-point energies gives an average absolute deviation nearly the same as scaled HF/6–31G^* zero-point energies for G2, G2(MP2), and B3LYP/6–311 + G(3df,2p) enthalpies. A scale factor of 0.98, which has been recommended in some studies, increases the average absolute deviation by about 0.2 kcal/mol. Geometries from B3LYP/6–31G^* are found to do as well as MP2/6–31G^* geometries in the calculation of the enthalpies of formation.     

A gravimetric and an X-ray fluorescence method for the determination of rubidium in Rb2U(SO4)3

Chemical characterization of rubidium uranium(IV) trisulfate, Rb₂U(SO₄)₃, a new chemical assay standard for uranium requires accurate analysis of rubidium. A gravimetric and an X-ray fluorescence method (XRF) for the determination of rubidium in this compound are described. In the gravimetric method, rubidium is determined as Rb₂Na[Co(NO₂)₆].H₂O without separating uranium with a precision of the order of ±0.5%. In the XRF method, the concentration ratio of rubidium to uranium, C_Rb/C_U, is determined in the solid samples by the binary ratio method using calibration between intensity ratios (I_Rb/I_U) and concentration ratios (C_Rb/C_U). The concentration of rubidium is derived using the uranium value which is known with a precision better than ±0.05%. The XRF method has a precision better than ±0.8% for rubidium determination.     

The ground-state singlet potential surface for C2H4

Calculations with an extended polarized basis set and Møller-Plesset perturbation theory including triple substitution correlation corrections in the fourth-order treatment indicate that singlet ethylidene (CH₃CH:) is not a local minimum on the C₂H₄ potential energy surface. Rearrangement to ethylene occurs without actuation. Barriers for hydrogen scrambling and for 1,1-hydrogen elimination are estimated.     

Electron spin resonance study of copper(II) complexes with square pyramidal and compressed trigonal bipyramidal symmetries in different solvents at 295 K and 77 K

An electron spin resonance (ESR) study has been carried out on six copper(II) complexes. Two of these, Cu(den)(SCN)₂ and [Cu(den)(SCN)](ClO₄), have a square pyramidal CuN₄S coordination in the solid state while the remaining four complexes, Cu(pib)tu, Cu(bipy)tu, Cu(bipy) and Cu(bipyam), have compressed trigonal bipyramidal Cu(N₂S)N₂ Cu(N₂S)N₂, Cu(N₂Cl)N₂ and Cu(N₂I)N₂, respectively, type of coordination in the solid state. Excepting Cu(pib)tu, all complexes show characteristic isotropic fourline hyperfine structure in water, methanol, ethanol and dimethylformamide at 295 K. At 77 K, owing to the poor glass-forming ability of water, the spectral features are not properly resolved and are also not consistent with the lineshape requirements. Therefore, evaluation of spin Hamiltonian parameters is made from the frozen dimethylformamide spectra. Some interesting observations have been made. In highly viscous 2-methyl-benzoxazole, the spectral lineshape is considerably modified. Quantitative evaluation has been made of metal-ligand bonding and various contributions to linewidths.     

Ultracentrifugation Method to Measure Water-Soluble Monomer Incorporation in Latex

Emulsion copolymerizations involving water-soluble functional monomers such as N-methylolacrylamide often result in the formation of water-soluble polymer that remains in the aqueous phase of the latex. A simple procedure is developed to determine the amount of water-soluble polymer in the aqueous phase of a high-solids latex using ultracentrifugation. Dilution of the latex with water is usually found necessary for good separation during ultracentrifugation. If the latex contains a surface-active species (surfactant) in amounts comparable to the amount of water-soluble polymer, calculation of the amount of water-soluble polymer in the serum of the original latex will require information about dilution dependent partitioning of the surfactant between the surface of the particles and the aqueous phase. This paper outlines a procedure that enables determination of the amount of water-soluble polymer in the aqueous phase of the original latex, by ultracentrifugation of the latex diluted to different concentrations. The procedure also gives the Henrys constant for the adsorption of the surfactant on the surface of the polymer particles in the latex.     

In vitro and in vivo investigations on the photodynamic activity of core-modified expanded porphyrin--ammonium salt of 5,10,15,20-tetrakis-(meso-p-sulfonato phenyl)-25,27,29-trithia sapphyrin

The core modification of expanded porphyrins has been proved to have better photochemical properties, which are favorable for photodynamic therapy (PDT) applications. In this context, this study was aimed to investigate the in vitro and in vivo photodynamic activity of one such core-modified expanded porphyrin, namely, ammonium salt of 5,10,15,20-tetrakis-(meso-p-sulfonato phenyl)-25,27,29-trithia sapphyrin. For the in vitro studies, human erythrocytes were used as a membrane semimodel system to investigate the partitioning ability and drug-uptake characteristics. The partition studies on the membrane semimodel system revealed that maximum partitioning occurs at 12 microgm/mL concentration, and from the drug-uptake studies it is observed that maximum amount of the sensitizer is bound to the erythrocyte membranes during a 45 min incubation period. Photohemolysis studies at different concentrations of the sensitizer and exposure time showed maximum damage at 5 microgm/mL and 30 min exposure time. In vivo studies were performed on 7,12-dimethylbenz(a)nthracene-induced superficial squamous cell carcinoma on mouse skin. The sensitizer at a concentration of 2.5% in 2.0% dimethyl sulfoxide was applied topically on the tumor spot. After 1 h incubation the tumor spot was exposed to laser irradiation from Nd-YAG laser at its second harmonic wavelength of 532 nm. The photodynamic efficacy was estimated by tumor volume measurements at regular intervals after the treatment. One month after PDT exposure a 3.9-fold decrease in the tumor volume was observed with respect to the tumor volume before treatment. The treatment efficacy was further confirmed by histological and fluorescence spectroscopic evaluations of the tissue biopsy sample from the treated area. The results of our study suggest that the ammonium salt of 5,10,15,20-tetrakis-(meso-p-sulfonato phenyl)-25,27,29-trithia sapphyrin may find possible applications in the new modality of cancer treatment.