Development and validation of a highly sensitive LC‐MS/MS‐ESI method for the determination of bicalutamide in mouse plasma: application to a pharmacokinetic study

A highly sensitive, rapid assay method has been developed and validated for the estimation of bicalutamide in mouse plasma using liquid chromatography coupled to tandem mass spectrometry with electrospray ionization in the negative‐ion mode. The assay procedure involves extraction of bicalutamide and tolbutamide (internal standard, IS) from mouse plasma with a simple protein precipitation method. Chromatographic separation was achieved using an isocratic mobile phase (0.2% formic acid:acetonitrile, 35:65, v/v) at a flow rate of 0.5 mL/min on an Atlantis dC₁₈ column (maintained at 40 ± 1°C) with a total run time of 3.0 min. The MS/MS ion transitions monitored were m/z 428.9 → 254.7 for bicalutamide and m/z 269.0 → 169.6 for IS. Method validation was performed as per FDA guidelines and the results met the acceptance criteria. The lower limit of quantitation achieved was 1.04 ng/mL and the linearity range extended from 1.04 to 1877 ng/mL. The intra‐ and inter‐day precisions were in the ranges of 0.49–4.68 and 2.62–4.15, respectively. Copyright © 2012 John Wiley & Sons, Ltd.     

Highly sensitive LC-MS/MS-ESI method for simultaneous quantitation of albendazole and ricobendazole in rat plasma and its application to a rat pharmacokinetic study

A highly sensitive and specific LC-MS/MS-ESI method was developed for simultaneous quantification of albenadazole (ABZ) and ricobendazole (RBZ) in rat plasma (50 μL) using phenacetin as an internal standard (IS). Simple protein precipitation was used to extract ABZ and RBZ from rat plasma. The chromatographic resolution of ABZ, RBZ and IS was achieved with a mobile phase consisting of 5 m m ammonium acetate (pH 6) and acetonitrile (20:80, v/v) at a flow rate of 1 mL/min on a Chromolith RP-18e column. The total chromatographic run time was 3.5 min and the elution of ABZ, RBZ and IS occurred at 1.66, 1.50 and 1.59 min, respectively. A linear response function was established for the ranges of concentrations 2.01-2007 and 6.02-6020 ng/mL for ABZ and RBZ, respectively. The intra- and inter-day precision values for ABZ and RBZ met the acceptance as per FDA guidelines. ABZ and RBZ were stable in battery of stability studies, viz. bench-top, auto-sampler and freeze-thaw cycles. The developed assay was applied to a pharmacokinetic study in rats.     

Transition metal complexes enslaved in the supercages of zeolite-Y: DFT investigation and catalytic significance

A series of zeolite-Y encapsulated hybrid catalysts, [M(STCH)·xH₂O]-Y have been prepared by encapsulating Schiff base complexes [where M?=?Mn(II), Fe(II), Co(II), Ni(II); (x?=?3) and Cu(II); (x?=?1); H₂STCH?=?salicylaldehyde thiophene-2-carboxylic hydrazone] in zeolite-Y matrix by flexible ligand method. These hybrid materials have been characterized by various physico-chemical techniques such as ICP-OES, elemental analyses, (FT-IR and electronic) spectral studies, BET, scanning electron micrographs, thermal analysis and X-ray powder diffraction patterns. X-ray powder diffraction analysis reveals that the structural integrity of the mother zeolite in the hybrid material remained intact upon immobilization of the complex. Density functional theory is employed to calculate the relaxed structure, bond angle, bond distance, dihedral angle, difference of highest occupied molecular orbital and lowest unoccupied molecular orbital energies gap and electronic density of states of ligand and their neat transition metal complexes. The hybrid materials are active catalysts for the hydroxylation of phenol using hydrogen peroxide (30% H₂O₂) as an oxidant in order to selectively synthesize catechol or hydroquinone, amongst them [Cu(STCH)·H₂O]-Y shown the highest % of selectivity towards catechol (81.3%).     

Molecular and Biochemical Characteristics of Recombinant β-Propeller Phytase from Bacillus licheniformis Strain PB-13 with Potential Application in Aquafeed

Phytic acid is the major storage form of organic phosphorus in nature- and plant-based animal feed. It forms insoluble complexes with nutritionally important metals and proteins that are unavailable for monogastric or agastric animals. Phytases initiate the stepwise hydrolysis of phytic acid and release inorganic orthophosphate. In the present investigation, the phytase gene from a phytase producing Bacillus licheniformis strain PB-13 was successfully expressed in Escherichia coli BL21. Recombinant phytase ‘rPhyPB13’ was found to be catalytically active, with an activity of 0.97 U/mL and specific activity of 0.77 U/mg. The rPhyPB13 was purified to 14.10-fold using affinity chromatography. Similar to other β-propeller phytases, purified rPhyPB13 exhibited maximal activity at pH 6.0–6.5 and 60 °C in the presence of 1 mM Ca²⁺ and was highly active over a wider pH range (pH 4.0–8.0) and high temperature (80 °C). It has shown maximum activity towards Na-phytate as substrate. The observed K _m , V _max and k _cat of purified rPhyPB13 were 1.064 mM, 1.32 μmol/min/mg and 27.46 s^?1, respectively. PhyPB13 was resistant to trypsin inactivation, activated in presence of Ca²⁺ and inhibited in presence of EDTA. Crude rPhyPB13 has good digestion efficiency for commercial feed and soybean meal. These results indicate that PhyPB13 is a β-propeller phytase that has application potential in aquaculture feed.     

Effect of electrolytes on the cloud point of chlorpromazine hydrochloride solutions

Cloud point (CP) phenomenon occurring in amphiphilic drug chlorpromazine hydrochloride (CPZ) solutions with and without salts is reported herein. The CP of a 50mM CPZ solution (prepared in 10mM sodium phosphate, SP, buffer) was found to decrease with increasing pH, both in the absence as well as presence (50mM) of added salts (NaCl, NaBr, LiBr, KBr, tetra-n-butylammonium bromide). Whereas, at a fixed concentration of NaCl, the CP increased with increasing CPZ concentration, addition of increasing amounts of salts (NaF, NaCl, NaBr, LiCl, KCl) to 50mM CPZ solution (at pH 6.7) caused continuous increase in CP. On the basis of these studies the binding-effect orders of counterions and co-ions have been deduced, respectively, as: Br(-)>Cl(-)>F(-) and Li(+)>Na(+)>K(+). The similar trend of increasing CP with addition of increasing amounts of quaternary bromides (tetramethylammonium bromide, TMeAB; tetraethylammonium bromide, TEtAB; tetra-n-propylammonium bromide, TPrAB; tetra-n-butylammonium bromide, TBuAB; tetra-n-pentylammonium bromide, TPeAB) to 50mM CPZ solutions (at pH 6.7) was found to be dependent upon the alkyl chain length of the particular salt. The overall behaviour has been discussed in terms of electrostatic interactions, micellar growth, and mixed micelle formation.     

Meso-diacylated calix[4]pyrrole: structural diversities and enhanced binding towards dihydrogenphosphate ion

Meso-diacylated calix[4]pyrrole was obtained via acid catalysed condensation of meso-acylated dipyrromethane with acetone. Selective presence of flexible substituents at the calix[4]pyrrole periphery led to interesting structural motifs in the solid state along with enhanced binding towards anions, especially dihydrogenphosphate ion via anchoring.     

Production of Raw Starch-Saccharifying Thermostable and Neutral Glucoamylase by the Thermophilic Mold <Emphasis Type="Italic">Thermomucor indicae-seudaticae</Emphasis> in Submerged Fermentation

Among physical and nutritional parameters optimized by “one variable at a time” approach, four cultural variables (sucrose, MgSO₄ ^.7H₂O, inoculum size, and incubation period) significantly affected glucoamylase production. These variables were, therefore, selected for optimization using response surface methodology. The p-values of the coefficients for linear effect of sucrose and inoculum size were less than 0.0001, suggesting them to be the key experimental variables in glucoamylase production. The enzyme production (34 U/ml) attained under optimized conditions (sucrose, 2%; MgSO₄ ^.7H₂O, 0.13%; yeast extract, 0.1%; inoculum size, 5 × 10⁶ spores per 50 ml production medium; incubation time, 48 h; temperature, 40°C; and pH 7.0) was comparable with the value predicted by polynomial model (34.2 U/ml). An over all 3.1-fold higher enzyme titers were attained due to response surface optimization. The experimental model was validated by carrying out glucoamylase production in shake flasks of increasing capacity (0.25–2.0 l) and 22-l laboratory bioreactors (stirred tank and airlift), where the enzyme production was sustainable. Furthermore, the fermentation time was reduced from 48 h in shake flasks to 32 h in bioreactors.     

A photodimerization approach to crosslink and functionalize microgels

Microgels were prepared within reverse micelles via photocrosslinking. Gelation resulted from the [2 + 2] photodimerization reaction of nitrocinnamoyl (NC) groups on multi-arm polyethylene glycol (PEG) or gelatin. Because of the potential for biomedical and chemical applications, immobilization capacity within the microgels was investigated. Quantum dots (QDs), for example, share a similar size scale with proteins and can be physically trapped within the microgels. In addition, the optoelectronic properties of QDs could be utilized for analytical, imaging, and therapeutic purposes. Small molecules and recognition sequences (e.g. biotin) can also be covalently immobilized within the microgel networks through the photodimerization reaction. In the presence of biotin-PEG-NC, the resulting microgels added to streptavidin-coated plates. The microgel properties such as biodegradability and degree of swelling may be engineered for particular applications including targeted monitoring and controlled drug delivery systems.