Radiation-induced synthesis of RuO2 nanoparticles by thermal decomposition of Ru-tris-acetylacetonate

Pure-phase RuO₂ nanoparticles were obtained by thermal decomposition of unirradiated and γ-irradiated Ru-tris-acetylacetonate precursors. Several influencing factors including absorbed dose, calcination times and temperatures and addition of surfactants were thoroughly investigated. The newly synthesized RuO₂ nanoparticles were characterized by X-ray diffraction, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques. The results showed that the best conditions for the preparation of mono-dispersed RuO₂ nanoparticles were achieved by calcinations of unirradiated Ru-tris-acetylacetonate for 6 h at 600°C. For γ-irradiated Ru-tris-acetylacetonate with 10² Gy total γ-ray doses, the optimal conditions for RuO₂ preparation were calcination for 2 h at 200°C. Thermal stability of RuO₂ nanoparticles was studied using thermogravimetric (TG) and differential thermal analysis (DTA) techniques, and the results were evaluated and discussed.     

Thermal conductivity of Zn doped CoFe2O4 ferrites

A series of samples of the type Co_1-xZn_xFe₂O₄ (x = 0.0, 0.2, 0.3, 0.4, 0.5, 0.6, 0.8 and 1.0) was prepared as ceramics. The existence of a single phase was confirmed by x-ray studies. The thermal conductivity and specific heat were measured at temperatures ranging from 100°C to 200°C. The thermal conductivity had a minimum value at x = 0.4, caused by maximum scattering of thermal phonons which arose from the change of crystal size and excess of lattice vacancies. The phonon frequency was estimated to have an optimum value at x = 0.4, resulting from maximum porosity which disturbs the propagation of the thermal waves.     

Recent synthetic methodologies for pyrazolo[1,5-a]pyrimidine

The development of new synthetic routes towards pyrazolo[1,5-a]pyrimidines for their biological and medicinal exploration is an attractive area for researchers. This review focuses on various synthetic routes developed in the last decade for the synthesis of differently substituted pyrazolo[1,5-a]pyrimidines by a broad range of organic reactions by means of 5-aminopyrazole as a precursor.     

Selective uranium adsorption using modified acrylamide resins

Polymeric matrices composed of N,N′-Methylenebis(acrylamide)/glycidyl methacrylate was prepared and modified producing two resins (GMA/MBA/OH and GMA/MBA/SO₃H). The adsorption of U(VI) ions onto the modified acrylamide resins was studied from synthetic and granite samples. For better understanding around the uranium mineralization and the rock-forming minerals of the hosted granitic rocks, to facilitate the choice of the appropriate ore-processing techniques, it was necessary to identify the mineral composition and the radiometric specifications of the used granitic rock. The synthesized adsorbents revealed a promising selective adsorption toward the U(VI) ions from its bearing solutions even with the competence of other cations.

     

Pyrazoles and Isoxazoles Based Sulfanilamide and Phenazone as Antimicrobial Agents: Synthesis and Biological Activity

New pyrazole and pyridine derivatives have been synthesized from sulfanilamide and phenazone via diazotization and coupling with a wide range of α-CH acids followed by heterocyclization with hydrazine derivative, hydroxylamine and cyanoacetamide. The antimicrobial tests of the products demonstrate high to moderate activity against Gram (?ve) bacteria and the tested fungi. No positive action of the products is observed against Gram (+ve) bacteria.

     

Co-pyrolysis of macroalgae and lignocellulosic biomass

Synergistic effect of co-pyrolysis of macroalgae [Enteromorpha prolifera (EP)] and lignocellulosic biomass [rice husk (RH)] in a fixed bed reactor for maximum and enhanced biofuels yield has been investigated. The main and interaction effects of three effective co-pyrolysis parameters (pyrolysis temperature, feedstock blending ratio, and heating rate) were also modeled and simulated to determine the yield rates of bio-oil and bio-char, respectively. Optimization studies were, then, performed to predict the optimal conditions for maximum yields using the central composite circumscribed experimental design in Design Expert^® software 8.0.6. Analysis of variance was carried out to determine whether the fit of the multiple regressions is significant for the second-order model. Normal pyrolysis oils from EP, RH, and co-pyrolysis oils obtained from different feedstock blending ratios were examined using the gas chromatography-mass spectrometry to identify their compositions. Some vital properties of oils and bio-chars such as the heating value, water content, elemental compositions, and specific gravity were also determined, which unveiled that synergistic effect exists between EP and RH during co-pyrolysis, and this led to increase in products’ yields and improved co-pyrolysis products’ quality.

     

Thermal-diffusion and diffusion-thermo effects on combined heat and mass transfer by hydromagnetic three-dimensional free convection over a permeable stretching surface with radiation

The thermal-diffusion and diffusion-thermo effects on the heat and mass transfer characteristics of free convection past a continuously stretching permeable surface in the presence of magnetic field, blowing/suction and radiation are studied. The fluid viscosity is assumed to vary with temperature. The resulting, governing three-dimensional equations are transformed using a similarity transformation and then solved numerically by the shooting method. Comparison with previously published work is performed and full agreement is obtained. A parametric study showing the effects of variable viscosity parameter β, magnetic parameter M, Dufour number Df, Soret number Sr, radiation parameter R and blowing/suction parameter f₀ on the velocity, temperature, and concentration field of a hydrogen-air mixture as a non-chemical reacting fluid pair, as well as the local skin-friction coefficient, the local Nusselt number, and the local Sherwood number is carried out. These are illustrated graphically and in tabular form to depict special features of the solutions.     

The influence of heat transfer and magnetic field on peristaltic transport of a Newtonian fluid in a vertical annulus: Application of an endoscope

This Letter discusses the influence of heat transfer and magnetic field on the peristaltic flow of Newtonian fluid in a vertical annulus under a zero Reynolds number and long wavelength approximation. The inner tube is uniform, rigid, while the outer tube has a sinusoidal wave traveling down its wall. The flow is investigated in a wave frame of reference moving with velocity of the wave. Numerical calculations are carried out for the pressure rise and frictional forces. The features of the flow characteristics are analyzed by plotting graphs and discussed in detail.     

Novel flame retardant paint based on Co(II) and Ni(II) metal complexes as new additives for surface coating applications

The study is focused on the synthesis of a new Co(II) and Ni(II) metal complexes, which is synthesized by the reaction of the isatin 4‐aminoantipyrine Schiff base ligand with selected divalent Co(II) and Ni(II) ions and their possible applications as flame retardant additives in paint formulations for surface coating application. The prepared metal complexes were characterized using a combination of Fourier transform infrared, elemental analysis, proton nuclear magnetic resonance, ¹³C‐NMR spectra, and mass spectroscopy. The prepared Schiff base ligand metal complexes were physically added to alkyd paint formulation to give coating formulations at a laboratory scale and then applied onto plywood and steel panels using a brush. The ignitability and oxygen index values obtained indicated that the paint which contained the prepared Co(II) and Ni(II) metal complexes as additives exhibited very good flame retardant. The physical and mechanical characteristics of the coatings were studied in order to estimate any disadvantages due to the incorporation of the additives. It was discovered that the added substances did not impact the hardness, flexibility, and adhesion of the prepared coating films. The gloss of the paint formulation film was improved due to the incorporation of the aromatic ring into the formulation and the level of the oil percent.     

The impact of indium metal as a minor bimetal on the anodic dissolution and passivation performance of zinc for alkaline batteries: part I—potentiodynamic,potentiostatic, XRD,SEM, and EDAX studies

Journal of Solid State Electrochemistry - Zinc metal is an important element that can be used for long-life alkaline batteries. In this work, it is found that the addition of minor amounts of...