Fermentation of a skim milk concentrate with Streptococcus thermophilus and chymosin: structure, viscoelasticity and syneresis of gels

Fermentation of a reconstituted skim milk concentrate (8% protein) was investigated to elucidate the effects of various fermentation parameters on the structural, rheological and visual (wheying-off) properties of the resulting gels (pH 4.60). Fermentation trials were performed with non-exocellular polysaccharide-producing strains of Streptococcus thermophilus at various fermentation temperatures and at various chymosin levels. Oscillatory vane rheometry carried out on the intact gels (at 4 °C) showed that the level of chymosin had a significant impact on the gel strength (storage modulus G′). This can be explained by the arrangement of casein micelles into more compact aggregates and the enhanced fusion of aggregated casein micelles as revealed by transmission electron microscopy for the gels fermented with chymosin. Wheying-off of the stirred gels as measured by a centrifugation test (at 4 °C) and pore size of the intact gel structures investigated by scanning electron microscopy both increased with increasing level of chymosin and increasing fermentation temperature (resulting in an increase in acidification rate). A higher level of syneresis (wheying-off) is explained by the larger pore size, since larger pores present a lower resistance to the outflow of whey from the gel.     

Highly Dispersible Hexagonal Carbon–MoS2–Carbon Nanoplates with Hollow Sandwich Structures for Supercapacitors

MoS₂, a typical layered transition-metal dichalcogenide, is promising as an electrode material in supercapacitors. However, its low electrical conductivity could lead to limited capacitance if applied in electrochemical devices. Herein, a new nanostructure composed of hollow carbon–MoS₂–carbon was successfully synthesized through an l -cysteine-assisted hydrothermal method by using gibbsite as a template and polydopamine as a carbon precursor. After calcination and etching of the gibbsite template, uniform hollow platelets, which were made of a sandwich-like assembly of partial graphitic carbon and two-dimensional layered MoS₂ flakes, were obtained. The platelets showed excellent dispersibility and stability in water, and good electrical conductivity due to carbon provided by the calcination of polydopamine coatings. The hollow nanoplate morphology of the material provided a high specific surface area of 543 m² g⁻¹, a total pore volume of 0.677 cm³ g⁻¹, and fairly small mesopores (≈5.3 nm). The material was applied in a symmetric supercapacitor and exhibited a specific capacitance of 248 F g⁻¹ (0.12 F cm⁻²) at a constant current density of 0.1 A g⁻¹; thus suggesting that hollow carbon–MoS₂–carbon nanoplates are promising candidate materials for supercapacitors.     

Aryl trihydroxyborates: easily isolated discrete species convenient for direct application in coupling reactions

A conceptually and practically simple alternative approach to the use of arylboron species as the organometallic component in cross-coupling processes is described whereby trihydroxyborate salts are isolated and directly employed. The protocol derives practical benefit from the ease and convenience of the isolation and subsequent use of the discrete borate salts, eliminates the need for additional base, and aids the use of correct reaction stoichiometry.     

Spot overlapping in two-dimensional polyacrylamide gel electrophoresis separations: a statistical study of complex protein maps

A statistical approach able to extract the information contained in a two-dimenisional polyacrylamide gel electrophoresis (2-D PAGE) separation is here reported. The method is based on the quantitative theory of peak overlapping, a procedure previously developed by the authors and here extended to 2-D separations. The whole map is divided into many strips in order to obtain 1-D separations on which the statistic procedure is applied: the developed algorithms, on the basis of spot experimental data (intensity and spatial coordinates) permit to estimate the intrinsic number of components and to single out the specific order present in spot positions. The procedure was validated on computer-simulated maps. Its applicability to real samples was tested on maps obtained from literature sources. The following important information on protein mixtures can be extracted: (i) the number of proteins can be accurately estimated, on the basis of the spatial coordinates and intensities of spots detected in the 2-D PAGE map; (ii) the model describing distribution of interdistance between adjacent spots can be identified in both the separation dimensions; (iii) the presence of repeated interdistances in spot positions in the maps can be easily singled out: these regularities suggest specific protein modifications.     

NMR and EPR structural delineation of copper(II) complexes formed by kanamycin A in water

The complexes formed by kanamycin A at three different pH values (5.5, 7.4 and 12.0) were investigated by NMR and EPR spectroscopy. Paramagnetic relaxation contributions to proton relaxation rates were measured using a combination of the TOCSY sequence with the inversion recovery experiment in order to gain signal resolution in the bulk region. Measured contributions were converted into distances and used for structural determination by restrained simulated annealing where all possible chair and boat conformations of the rings were taken into account. The interaction of the Cu(II) ion with the nitrogen of the C ring is apparent at all pH values. At higher pH also the amino group of ring A starts to be involved in the metal coordination sphere. This is accompanied by a switch in conformation of ring C. Structures are consistent with the involvement in the coordination sphere either of the 2' or 4' hydroxyl oxygens at pH 5.5 and the 5 and the 6' hydroxyl oxygens (or the ring oxygen) at pH 12.0.     

On the Cl···N halogen bond: a rotational study of CF3Cl···NH3

The rotational spectra of six isotopologues (CF(3)(35)Cl···(14)NH(3), CF(3)(37)Cl···(14)NH(3), CF(3)(35)Cl···(15)NH(3), CF(3)(37)Cl···(15)NH(3), CF(3)(35)Cl···(14)ND(3) and CF(3)(37)Cl···(14)ND(3)) of the CF(3)Cl···NH(3) adduct have been investigated and analyzed by pulsed jet Fourier transform microwave spectroscopy. Rotational, centrifugal distortion and quadrupole ((35)Cl, (37)Cl, (14)N) coupling constants have been precisely obtained. The two subunits of the complex are held together via a Cl···N halogen bond interaction. Information on the internal dynamics and on the dissociation energy of the complex is provided.     

Synthesis of silver nanoparticle necklaces without explicit addition of reducing or templating agents

Here we report that silver nanoparticle necklaces can be readily formed by treatment of colloidal silica with ammoniacal silver complex solution followed by washing, deposition and ageing. We investigate the morphology of the produced materials and elucidate the key variables that influence this promising new approach to one-dimensional nanostructuring.     

Oligoporphyrin Arrays Conjugated to [60]Fullerene: Preparation,NMR Analysis,and Photophysical and Electrochemical Properties

We report the synthesis and physical properties of novel fullerene–oligoporphyrin dyads. In these systems, the C‐spheres are singly linked to the terminal tetrapyrrolic macrocycles of rod‐like meso,meso‐linked or triply‐linked oligoporphyrin arrays. Monofullerene–mono(Zn^II porphyrin) conjugate 3 was synthesized to establish a general protocol for the preparation of the target molecules (Scheme 1). The synthesis of the meso,meso‐linked oligopophyrin–bisfullerene conjugates 4 – 6 , extending in size up to 4.1 nm ( 6 ), was accomplished by functionalization (iodination followed by Suzuki cross‐coupling) of the two free meso‐positions in oligomers 21 – 23 (Schemes 2 and 3). The attractive interactions between a fullerene and a Zn^II porphyrin chromophore in these dyads was quantified as ΔG=−3.3 kcal mol⁻¹ by variable‐temperature (VT) ¹H‐NMR spectroscopy (Table 1). As a result of this interaction, the C‐spheres adopt a close tangential orientation relative to the plane of the adjacent porphyrin nucleus, as was unambiguously established by ¹H‐ and ¹³C‐NMR (Figs. 9 and 10), and UV/VIS spectroscopy (Figs. 13–15). The synthesis of triply‐linked diporphyrin–bis[60]fullerene conjugate 8 was accomplished by Bingel cyclopropanation of bis‐malonate 45 with two C₆₀ molecules (Scheme 5). Contrary to the meso,meso‐linked systems 4 – 6 , only a weak chromophoric interaction was observed for 8 by UV/VIS spectroscopy (Fig. 16 and Table 2), and the ¹H‐NMR spectra did not provide any evidence for distinct orientational preferences of the C‐spheres. Comprehensive steady‐state and time‐resolved UV/VIS absorption and emission studies demonstrated that the photophysical properties of 8 differ completely from those of 4 – 6 and the many other known porphyrin–fullerene dyads: photoexcitation of the methano[60]fullerene moieties results in quantitative sensitization of the lowest singlet level of the porphyrin tape, which is low‐lying and very short lived. The meso,meso‐linked oligoporphyrins exhibit ¹O₂ sensitization capability, whereas the triply‐fused systems are unable to sensitize the formation of ¹O₂ because of the low energy content of their lowest excited states (Fig. 18). Electrochemical investigations (Table 3, and Figs. 19 and 20) revealed that all oligoporphyrin arrays, with or without appended methano[60]fullerene moieties, have an exceptional multicharge storage capacity due to the large number of electrons that can be reversibly exchanged. Some of the Zn^II porphyrins prepared in this study form infinite, one‐dimensional supramolecular networks in the solid state, in which the macrocycles interact with each other either through H‐bonding or metal ion coordination (Figs. 6 and 7).     

Separation of biomolecules by μ-high-performance anion-exchange chromatography using a tentacle-like stationary phase

A variety of biomolecules and their variants, which have previously been problematic to separate, have been analysed using a novel anion-exchange resin based on a non-porous polystyrene polymeric support with a hydrophilic coating and grafted tentacular quaternary ammonium functional groups. The hydrophilic coating results in minimal interaction between the support and the biomolecule, while the highly flexible tentacular-like anion-exchange groups increase the ionic interaction potential and act as an umbrella to hold the proteins away from the surface. Because of the removal of silanophilic interactions, minimisation of hydrophobic interactions, and the highly flexible nature of the tentacle-like ion exchangers, ionic interactions can therefore dominate the separation. As such this phase is highly suited to the separation of highly charged biomolecules and their variants. This polymeric strong anion-exchange (SAX) support was packed into a fused-silica capillary column and, using a salt concentration gradient, various recombinant proteins were analysed by -HPLC resulting in baseline resolution.Awarded a poster prize on the occasion of the Euranalysis XIII conference, Salamanca, Spain, 5–10 September 2004