Azulenesulfonium Salts: Accessible,Stable, and Versatile Reagents for Cross‐Coupling

Azulenesulfonium salts may be readily prepared from the corresponding azulenes by an S_EAr reaction. These azulene sulfonium salts are bench‐stable species that may be employed as pseudohalides for cross‐coupling. Specifically, their application in Suzuki–Miyaura reactions has been demonstrated with a diverse selection of coupling partners. These azulenesulfonium salts possess significant advantages in comparison with the corresponding azulenyl halides, which are known to be unstable and difficult to prepare in pure form.     

The assay of pterostilbene in spiked matrices by liquid chromatography tandem mass spectrometry and isotope dilution method

Pterostilbene (trans‐3,5‐dimethoxy‐4‐hydroxystilbene) is an active component found in several plant species, exhibiting important pharmacological properties. A new and reliable method of assaying this phyto compound in various matrices is presented; the assay is based on (1) the selectivity of liquid chromatography (LC) hyphenated with electrospray ionisation (ESI), (2) the specificity of a two‐step mass spectrometric analysis (MS/MS) and (3) the accuracy of the isotope dilution method. The labelled analogue may be conveniently synthesised in a few steps. The sensitivity of the method is confirmed by the very low limit of detection (LOD) and limit of quantitation (LOQ) values achieved in the assay of pterostilbene in two distinct fortified matrices, and is further supported by the observed accuracy values. Copyright © 2010 John Wiley & Sons, Ltd.     

On data-guided optimal control simulation of human motion

This work investigates the combination of optical motion capturing data with optimal control simulations of human motion, which can be important in a wide range of applications in the professional as well as the private sector, ranging from health and ergonomics over human-machine-interaction to sports and games [1–3]. There are methodically very different approaches to include optical measurement data in the simulation of human motion, see e.g. [4–6]. Two different approaches to combine data and simulation are investigated in this work. Either we use a soft constraints approach, where the difference of simulated and measured marker positions is part of the objective function (1), or we formulate an hard constraints approach with nonlinear constraints that set an upper bound on this difference (2), while the objective function is purely physiologically motivated. (© 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

BASE-CATALYZED HYDROGEN-DEUTERIUM EXCHANGE IN BENZO DERIVATIVES OF FIVE-MEMBERED AROMATIC HETEROCYCLES. PART VII. PRIMARY HYDROGEN ISOTOPE EFFECTS IN SOME 5- AND 6-SUBSTITUTED BENZOTHIAZOLES

Abstract

The rates of the base-catalyzed hydrogen-deuterium exchange at position 2, and the reverse, in some 5-and 6-substituted benzothiazoles are reported. The plots of log k _sH, and log k _sD against the [sgrave]_m + [sgrave]_p values of the substituents, according to the Hammett-Jaffé equations, are slightly curved. The primary hydrogen isotope effect k _sH/k _sD varies between 0.7 and 2.3 and the plot of log k _sH/k _sD against the [sgrave]_m + [sgrave]_p values of the substituents is a more pronounced curve, showing a maximum near to the [sgrave]_m + [sgrave]_p value of ?0.3. By these investigations the simple utilization of the primary hydrogen isotope effect in the prediction of reaction mechanisms seems extremely hazardous.     

Analytical determination of specific 4,4′-methylene diphenyl diisocyanate hemoglobin adducts in human blood

4,4′-Methylene diphenyl diisocyanate (MDI) is one of the most important isocyanates in the industrial production of polyurethane and other MDI-based synthetics. Because of its high reactivity, it is known as a sensitizing agent, caused by protein adducts. Analysis of MDI is routinely done by determination of the nonspecific 4,4′-methylenedianiline as a marker for MDI exposure in urine and blood. Since several publications have reported specific adducts of MDI and albumin or hemoglobin, more information about their existence in humans is necessary. Specific adducts of MDI and hemoglobin were only reported in rats after high-dose MDI inhalation. The aim of this investigation was to detect the hemoglobin adduct 5-isopropyl-3-[4-(4-aminobenzyl)phenyl]hydantoin (ABP-Val-Hyd) in human blood for the first time. We found values up to 5.2 ng ABP-Val-Hyd/g globin (16 pmol/g) in blood samples of workers exposed to MDI. Because there was no information available about possible amounts of this specific MDI marker, the analytical method focused on optimal sensitivity and selectivity. Using gas chromatography–high-resolution mass spectrometry with negative chemical ionization, we achieved a detection limit of 0.02 ng ABP-Val-Hyd/g globin (0.062 pmol/g). The robustness of the method was confirmed by relative standard deviations between 3.0 and 9.8 %. Combined with a linear detection range up to 10 ng ABP-Val-Hyd/g globin (31 pmol/g), the enhanced precision parameter demonstrates that the method described is optimized for screening studies of the human population.     

Stabilization of the Triphosphallyl Ligand η3‐P3{P(O)H} at Iridium via Alkaline Activation of P4

The selective functionalization of the polyphosphorus moiety Ph₂PCH₂PPh₂PPPP present as a tetrahapto‐ligand in complex [Ir(dppm)(Ph₂PCH₂PPh₂PPPP)]⁺ ( 1 , dppm=Ph₂PCH₂PPh₂) was obtained by reaction of 1 with water under basic conditions at room temperature. The formation of the new triphosphaallyl moiety η³‐P₃{P(O)H} was determined in solution by NMR spectroscopy, and confirmed in the solid state by a single‐crystal X‐ray structure of the stable product [Ir(κ²‐dppm)(κ¹‐dppm)(η³‐P₃{P(O)H})] ( 2 ). In solution, 2 has a fluxional behavior attributable to the four P atoms belonging to the tetraphosphorus moiety in 1 and exhibits a chemical exchange process involving the two PPh₂ moieties of the same bidentate ligand, as determined by 1D and 2D NMR spectroscopy experiments carried out at variable temperature. The mechanism of the reaction was investigated at the DFT level, which suggested a selective attack of an in‐situ generated OH^? anion on one of the non‐coordinated phosphorus atoms of the P₄ moiety. The reaction then evolves through an acid‐assisted tautomerization, which leads to the final compound 2 . Bonding analysis pointed out that the new unsubstituted P₃‐unit in the η³‐P₃{P(O)H} moiety behaves as a triphosphallyl ligand.     

Targeted Metabolomics of Dried Blood Spot Extracts

Dried blood spot (DBS) samples are already successfully used in newborn screening and pharmacological analyses. The application of DBS matrix to further metabolomic methods will considerably extend the analytical options for the diagnostics of metabolic diseases. We present an MS/MS based method for the simultaneous extraction and quantification of 188 metabolites from dried blood spots. We provide a sensitive and reproducible method that adapts the AbsoluteIDQ? p180 kit of Biocrates to the DBS matrix for the quantification of metabolites of different substance classes including amino acids, biogenic amines, free carnitine, acylcarnitines, hexoses, glycerophospholipids, lysophosphatidylcholines, phosphatidylcholines, and sphingolipids.     

Progress in the Understanding of the Key Pharmacophoric Features of the Antimalarial Drug Dihydroartemisinin: An Experimental and Theoretical Charge Density Study

The accurate, experimental charge density distribution, ρ( r ), of the potent antimalarial drug dihydroartemisinin (DHA) has been derived for the first time from single‐crystal X‐ray diffraction data at T=100(2) K. Gas‐phase and solid‐state DFT simulations have also been performed to provide a firm basis of comparison with experimental results. The quantum theory of atoms in molecules (QTAIM) has been employed to analyse the ρ( r ) scalar field, with the aim of classifying and quantifying the key real‐space elements responsible for the known pharmacophoric features of DHA. From the conformational perspective, the bicyclo[3.2.2]nonane system fixes the three‐dimensional arrangement of the 1,2,4‐trioxane bearing the active O? O redox centre. This is the most nucleophilic function in DHA and acts as an important CH???O acceptor. On the contrary, the rest of the molecular backbone is almost neutral, in accordance with the lipophilic character of the compound. Another remarkable feature is the C? O bond length alternation along the O‐C‐O‐C polyether chain, due to correlations between pairs of adjacent C? O bonds. These bonding features have been related with possible reactivity routes of the α‐ and β‐DHA epimers, namely 1) the base‐catalysed hemiacetal breakdown and 2) the peroxide reduction. As a general conclusion, the base‐driven proton transfer has significant non‐local effects on the whole polyether chain, whereas DHA reduction is thermodynamically favourable and invariably leads to a significant weakening (or even breaking) of the O? O bond. The influence of the hemiacetal stereochemistry on the electronic properties of the system has also been considered. Such findings are discussed in the context of the known chemical reactivity of this class of important antimalarial drugs.     

Pyrrolic Tripodal Receptors for the Molecular Recognition of Carbohydrates: Ditopic Receptors for Dimannosides

Synthetic ditopic receptors, designed for the molecular recognition of dimannosides, have been prepared by bridging two monotopic units effectively recognizing mannosides with linkers of the appropriate size and flexibility, endowed with hydrogen‐bonding groups. Affinities toward the α and β glycosides of the biologically relevant Manα(1–2)Man disaccharide were measured by NMR spectroscopy and isothermal titration calorimetry (ITC) in polar organic media (30–40 % DMF in chloroform). Significant selectivities and affinities in the micromolar range were observed in most cases, with two newly designed receptors being the most effective receptors of the set, together with a distinct preference of the dimannosides for the (S) enantiomer of the receptor in all cases. A 3D view of the recognition mode was elucidated by a combined NMR spectroscopic/molecular modeling approach, showing the dimannoside included in the cleft of the receptor. Compared to the monotopic precursors, the ditopic receptors showed markedly improved recognition properties, proving the efficacy of the modular receptor design for the recognition of disaccharides.