Heterocyclic compounds studies. Dynamic 13C NMR investigation and crystal structure of 3-hydroxy-1,5-benzoxathiepine

1-5-benzoxathiepine compounds are a novel class of heterocyclic rings that present interesting properties as central nervous system depressants. With the aim to contribute to the elucidation of the structure-activity relationship of this class of compounds we report a structural study of the 3-hydroxy-1,5-benzoxathiepine both in solution and in the solid state. Studies by dynamic ¹³C-nmr in solution show that three conformations are possible for the oxathiepin ring. A unique chair conformation characterizes the atoms in the oxathiepine ring of the crystallized molecule. The crystal structure was solved by direct methods. Values of bond distances and angles are within the expected range.     

New halogenated furanones from the marine alga delisea pulchra (cf. fimbriata)

An investigation of the natural products chemistry of the red alga Delisea pulchra, collected from the Cape Banks, New South Wales, Australia, yielded eight new polyhalogenated furanones (1–7) and the previously reported metabolites 8–24). The structures of 1–8 were determined from the interpretation of their 1D and 2D NMR, UV, IR and mass spectral data. For the first time, complete ¹H and ¹³C NMR data for compounds 14, 18, and 20-23 are reported.     

Spectroscopy of Dibenzorubicene: Experimental Data for a Search in Interstellar Spectra

We report on the characterization of dibenzo[cde,opq]rubicene (C₃₀H₁₄). The molecule was studied in solution at room temperature with absorption spectroscopy in the visible (vis) and ultraviolet (UV) wavelength ranges, and with emission spectroscopy. The infrared (IR), visible, ultraviolet, and vacuum ultraviolet (VUV) absorption spectra of a thin film were measured also at room temperature. In addition, the UV/vis absorption spectrum was measured at cryogenic temperatures using the matrix isolation spectroscopy technique. The interpretation of spectra was supported by theoretical calculations based on semiempirical and ab initio models, as well as on density functional theory. Finally, the results of the laboratory study were compared with interstellar spectra.     

Gas phase vibrational spectroscopy of mass-selected vanadium oxide anions

The vibrational spectra of vanadium oxide anions ranging from V(2)O(6)(-) to V(8)O(20)(-) are studied in the region from 555 to 1670 cm(-1) by infrared multiple photon photodissociation (IRMPD) spectroscopy. The cluster structures are assigned and structural trends identified by comparison of the experimental IRMPD spectra with simulated linear IR absorption spectra derived from density functional calculations, aided by energy calculations at higher levels of theory. Overall, the IR absorption of the V(m)O(n)(-) clusters can be grouped in three spectral regions. The transitions of (i) superoxo, (ii) vanadyl and (iii) V-O-V and V-O single bond modes are found at approximately 1100 cm(-1), 1020 to 870 cm(-1), and 950 to 580 cm(-1), respectively. A structural transition from open structures, including at least one vanadium atom forming two vanadyl bonds, to caged structures, with only one vanadyl bond per vanadium atom, is observed in-between tri- and tetravanadium oxide anions. Both the closed shell (V(2)O(5))(2,3)VO(3)(-) and open shell (V(2)O(5))(2-4)(-) anions prefer cage-like structures. The (V(2)O(5))(3,4)(-) anions have symmetry-broken minimum energy structures (C(s)) connected by low-energy transition structures of C(2v) symmetry. These double well potentials for V-O-V modes lead to IR transitions substantially red-shifted from their harmonic values. For the oxygen rich clusters, the IRMPD spectra prove the presence of a superoxo group in V(2)O(7)(-), but the absence of the expected peroxo group in V(4)O(11)(-). For V(4)O(11)(-), use of a genetic algorithm was necessary for finding a non-intuitive energy minimum structure with sufficient agreement between experiment and theory.     

Molecular dynamics simulation of the dielectric constant of water: the effect of bond flexibility

The role of bond flexibility on the dielectric constant of water is investigated via molecular dynamics simulations using a flexible intermolecular potential SPC/Fw [Y. Wu, H. L. Tepper, and G. A. Voth, J. Chem. Phys. 128, 024503 (2006)]. Dielectric constants and densities are reported for the liquid phase at temperatures of 298.15 K and 473.15 K and the supercritical phase at 673.15 K for pressures between 0.1 MPa and 200 MPa. Comparison with both experimental data and other rigid bond intermolecular potentials indicates that introducing bond flexibility significantly improves the prediction of both dielectric constants and pressure-temperature-density behavior. In some cases, the predicted densities and dielectric constants almost exactly coincide with experimental data. The results are analyzed in terms of dipole moments, quadrupole moments, and equilibrium bond angles and lengths. It appears that bond flexibility allows the molecular dipole and quadrupole moment to change with the thermodynamic state point, and thereby mimic the change of the intermolecular interactions in response to the local environment.     

Electrochemical and spectroscopic behavior of iron(III) porphyrazines in Langmuir-Schafer films

Thin films of a newly synthesized iron(III) porphyrazine, LFeOESPz ( L = ClEtO, OESPz = ethylsulfanylporphyrazine), have been deposited by the Langmuir-Schafer (LS) technique (horizontal lifting) on ITO or gold substrates. Before deposition, the floating films have been investigated at the air-water interface by pressure/area per molecule (pi/ A) experiments, Brewster angle microscopy (BAM) and UV-vis reflection spectroscopy (RefSpec). The complex reacts with water subphase (pH 6.2) forming the mu-oxo dimer, which becomes the predominant component of the LS films ( LS-Fe) as indicated by optical, IR, XPS, and electrochemical data. LS-Fe multilayers exhibit, between open circuit potential (OCP) and +0.90 V (vs SCE), two independent peak pairs with formal potentials, E surf (I) and E surf(II) of +0.56 V and +0.78 V, respectively. According to dynamic voltammetric and coulometric experiments the peak pair at +0.56 V is attributed to one-electron process at the iron(III) centers on the monomer, while the peak pair at +0.78 V is associated to a four-electron process involving mu-oxo-dimer oligomers. LS-Fe films prove to be quite stable electrochemically between OCP and +0.90 V. The electrochemical stability decreases, however, when the potential range is extended both anodically and cathodically outside these limits, due to formation of new species. Upon incubation with TCA solutions, LS-Fe films show remarkable changes in the UV-vis spectra, which are consistent with a significant mu-oxo dimer --> monomer conversion. Addition of TCA to the electrochemical cell using a LS-Fe film as working electrode, results in a linear increase of a cathodic current peak near -0.40 V as the TCA concentration varies in the 0.1-2.0 mM range. This behavior is interpreted in terms of TCA inducing a progressive change in the composition of the LS-Fe films in favor of the monomeric iron(III) porphyrazine, which is responsible for the observed increase in the cathodic current near -0.40 V.     

Magnesium hydrides and the dearomatisation of pyridine and quinoline derivatives

Reactions of the β-diketiminato n-butyl magnesium complex, [HC{(Me)CN(2,6-(i)Pr(2)C(6)H(3))}(2)Mg(n)Bu], with a range of substituted pyridines and fused-ring quinolines in the presence of PhSiH(3) has been found to result in dearomatisation of the N-heterocyclic compounds. This reaction is proposed to occur through the formation of an unobserved N-heterocycle-coordinated magnesium hydride and subsequent hydride transfer via the C2-position of the heterocycle prior to hydride transfer to the C4-position and formation of thermodynamically-favoured magnesium 1,4-dihydropyridides. This reaction is kinetically suppressed for 2,6-dimethylpyridine while the kinetic product, the 1,2-dihydropyridide derivative, was isolated through reaction with 4-methylpyridine (4-methylpyridine), in which case the formation of the 1,4-dihyropyridide is prevented by the presence of the 4-methyl substituent. X-ray structures of the products of these reactions with 4-methylpyridine, 3,5-dimethylpyridine and iso-quinoline comprise a pseudo-tetrahedral magnesium centre while the regiochemistry of the particular dearomatisation reaction is determined by the substitution pattern of the N-heterocycle under observation. The compounds are all air-sensitive and exposure of the magnesium derivatives of dearomatised pyridine and 4-dimethylaminopyridine (DMAP) to air resulted in ligand rearomatisation and the formation of dimeric μ(2)-η(2)-η(2)-peroxomagnesium compounds which have also been subject to analysis by single crystal X-ray diffraction analysis. An unsuccessful extension of this chemistry to N-heterocycle hydrosilylation is suggested to be a consequence of the low basicity of the silane reagent in comparison to the pyridine substrates which effectively impedes any further interaction with the magnesium centres.     

Modeling aqueous electrolyte solutions: Part 1. Fully dissociated electrolytes

Liquid densities (pvT), vapor pressures (VLE), and mean ionic activity coefficients (MIAC) at 25 °C of 115 single-salt electrolyte solutions containing univalent up to trivalent ions are modeled with the ePC-SAFT equation of state proposed by Cameretti et al. [L.F. Cameretti, G. Sadowski, J.M. Mollerup, Ind. Eng. Chem. Res. 44 (2005) 3355–3362; ibid., 8944]. For each ion, only two model parameters were adjusted to experimental density and MIAC data. Without using any additional binary parameters, ePC-SAFT is able to reproduce experimental data of the respective salt solutions up to high electrolyte molalities. Moreover, it is even able to describe the reversed MIAC series for alkali hydroxides and fluorides.     

Intra-operative optical diagnostics with vibrational spectroscopy

Established methods for characterization of tissue and diagnostics, for example histochemistry, magnetic resonance imaging (MRI), X-ray tomography, or positron emission tomography (PET), are mostly not suitable for intra-operative use. However, there is a clear need for an intra-operative diagnostics especially to identify the borderline between normal and tumor tissue. Currently, vibrational spectroscopy techniques (both Raman and infrared) complement the standard methods for tissue diagnostics. Vibrational spectroscopy has the potential for intra-operative use, because it can provide a biochemically based profile of tissue in real time and without requiring additional contrast agents, which may perturb the tissue under investigation. In addition, no electric potential needs to be applied, and the measurements are not affected by electromagnetic fields. Currently, promising approaches include Raman fiber techniques and nonlinear Raman spectroscopy. Infrared spectroscopy is also being used to examine freshly resected tissue ex vivo in the operating theater. The immense volume of information contained in Raman and infrared spectra requires multivariate analysis to extract relevant information to distinguish different types of tissue. The promise and limitations of vibrational spectroscopy methods as intra-operative tools are surveyed in this review.