Preparation of USY zeolite VOx supported catalysts from V(AcAc)3 and NH4VO3. Catalytic properties for the dehydrogenation of n-butane in oxygen-free atmosphere

The preparation of different samples of vanadia supported on ultrastable zeolite (VO(x)/USY) is discussed. The samples were prepared in order to obtain highly dispersed V-species, avoiding the formation of crystalline vanadia and the destruction of the zeolite framework. Two methods were employed for preparing VO(x)/USY samples: an organic route using V(AcAc)3 and an inorganic route using NH4VO3. The characterization of the samples was performed with XRD, TPR, NH3-TPD, and N2 isotherms. From these results it is concluded that when VO(x) is supported on the surface of USY from acidic aqueous solution of ammonium metavanadate, the destruction of the zeolite framework is accomplished. For higher pH values in the impregnating solution, undesired V2O5 is formed on the USY surface. On the other hand, VO(x)/USY prepared from the organic precursor shows no destruction of the USY structure. In addition, highly dispersed VO(x) are formed, though for relatively high V loadings (6%) an obstruction of the zeolite windows takes place. The samples are tested as catalysts for gas phase dehydrogenation of n-butane to olefins. The catalysts prepared from NH4VO3 are almost inactive for the reaction. On the other hand, both samples prepared from V(AcAc)3 present initial conversion levels in the 8-12% range. However, the selectivity depends on the V loading, the catalysts with 6% loading being the most selective (75%). The catalytic patterns of the samples (activity and selectivity) are in agreement with the physicochemical features of the VO(x)/USY surface.     

Polymeric flocculants processing by accelerated electron beams and microwave heating

Results obtained by accelerated electron beam, microwave and simultaneous microwave and electron beam application in the chemistry of acrylamide and acrylic acid copolymers (polymeric flocculants used for wastewater treatment) are presented. Comparative results concerning the molecular weight and Huggins’ constant for the acrylamide and acrylic acid copolymers obtained by classical heating, microwave heating, electron beam irradiation and simultaneous microwave and electron beam treatment are reported. Microwave heating produces high water solubility of the polymeric flocculants but median molecular weight values. Electron beam irradiation gives high molecular weight values but associated with a cross-linked structure (poor water solubility) while microwave energy addition to electron beam energy gives simultaneously high molecular weight values and high water solubility.     

Kinetics of thermal decomposition of alkaline phosphates

Summary The thermal behavior of KH₂PO₄, NaH₂PO₄ and Na₂HPO₄ under non-isothermal conditions using TG method with different heating rates was studied. The values of the reaction rate were processed by means of Friedmans differential-isoconversional method. A dependence of the activation energy vs. conversion was observed. Therefore a procedure based on the compensation effect (suggested by Budrugeac and Segal) was applied. A less speculative data processing protocol was offered by the non-parametric kinetics method suggested by Serra, Nomen and Sempere. Three steps were observed by non-isothermal heating: a dehydration, a dimerization and a polycondensation. The differences in the intimate reaction mechanism are determined by the initial number of water molecules.     

Type 2 intramolecular nitroso Diels-Alder reaction. Synthesis and structure of bridgehead oxazinolactams

[reaction--see text] The type 2 intramolecular Diels-Alder cycloaddition utilizing N-acylnitroso dienophiles provides an efficient entry into bridged oxazinolactams. In contrast to the bimolecular counterpart, the reaction is completely regioselective. Structural characterization of the cycloadducts allows for evaluation of the olefin distortion and the degree of pyramidalization of the bridgehead oxazinolactam.     

Spectroscopic investigation of the adsorption and oxidation of thiourea on polycrystalline Au and Au(111) in acidic media

In the present paper, a systematic electrochemical investigation on thiourea (TU) electrooxidation was developed on polycrystalline and (111) single-crystal gold electrodes in 0.1 M perchloric acid. The combination of cyclic voltammetry with in situ Fourier transform infrared spectroscopy (FTIRS) and differential electrochemical mass spectrometry techniques have allowed the nature of the species formed during the electroadsorption and electrooxidation of TU to be established. FTIRS experiments were performed in D2O to clean up the region of the H2O bending around 1600 cm(-1). It was concluded that TU adsorbs tilted on the surface in the 0.05-0.40 VRHE potential range. A dual-path reaction mechanism was evidenced in the oxidation process. The first pathway takes place from adsorbed TU at E > 0.40 VRHE and implies the formation of [Au(I)-(TU)2]+, which is oxidized to NH2CN and S0 at E > 0.80 VRHE. In a following oxidation step at E > 1.20 V, N2, CO2, and HSO4-/SO4(2-) were produced. The second parallel reaction occurs from TU in solution at E > 0.50 VRHE to form (TU)2(2+). All these species were characterized from the spectroscopic experiments. Similar results were obtained for both surfaces.     

Carbon-carbon coupling on tetrahedral iridium clusters: X-ray molecular structures and multinuclear NMR studies of the two isomeric forms of [Ir4(CO)6(μ3-η-HCCPh)(μ2-η-C4H2Ph2)(μ-PPh2)2]

The reactions of [HIr₄(CO)₉(Ph₂PCCPh)(μ-PPh₂)] (1) or [Ir₄(CO)₈(μ₃-η²-HCCPh)(μ-PPh₂)₂] (2) with HCCPh gave two isomeric forms of [Ir₄(CO)₆(μ₃-η²-HCCPh)(μ₂-η⁴-C₄H₂Ph₂)(μ-PPh₂)₂] (3 and 4) in good yields as the only products. These compounds were characterized with analytical and spectroscopic data including ¹H, ¹³C and ³¹P NMR (1 and 2D) spectroscopy and their molecular structures were established by X-ray diffraction studies. Compounds 3 and 4 exhibit the same distorted butterfly metal polyhedral arrangement of metal atoms with two μ-PPh₂ that occupy different positions in the structures of the two isomers. Both molecules contain a HCCPh ligand bonded in a μ₃-η²-// mode to one of the wings of the butterfly and a metallacyclic ring, which resulted from head-to-tail coupling, in the case of [Ir₄(CO)₆(μ₃-η²-HCCPh){μ₂-η⁴-(H)CC(Ph)C(H)C(Ph)}(μ-PPh₂)₂] (3) and tail-to-tail coupling, in that of [Ir₄(CO)₆(μ₃-η²-HCCPh){μ₂-η⁴-(H)CC(Ph)C(Ph)C(H)}(μ-PPh₂)₂] (4), and which is linked to two metal atoms of the second wing of the butterfly.     

Covalently bonded platinum(II) complexes of alpha-amino acids and peptides as a potential tool for protein labeling

Arylplatinum(II) complexes have been covalently bonded to the N and C termini and to the alpha-carbon of various amino acid derivatives. These organometallic-functionalized amino acid compounds can be converted into the corresponding free amino acids under both basic and acidic conditions; this demonstrates the excellent stability properties of these biomolecules. Due to the NMR activity displayed by the 195Pt nucleus (natural abundance 33.8%, I = 1/2) these compounds are functional bio-markers. Furthermore, the ability of the arylplatinum functional group to bind SO2 gas, selectively and reversibly as indicated by changes in the spectroscopic properties (1H, 13C, 195Pt NMR and UV spectra) of these compounds, allows for the potential use of these complexes as in vitro biosensors.     

Hyperbranched polycyclocarbosiloxane

A new cross-linkable naphthalene-cyclocarbosiloxane was synthesised starting from bis[1,4-bis(methylhydrosiloxanyl)-dihydronaphthalene] via catalytic addition of the Si-H reactive groups to the unsaturated bond of triethoxyvinylsilane. Hyperbranched polycyclocarbosiloxane networks were formed by condensation of the alcoxyl groups in the presence of dibutyltin dilaurate as catalyst. The cross-linking process was studied in order to obtain information concerning the values of the reaction parameters and to determine the position of the gelation point relative to conversion.GPC analysis, IR, and 1H-NMR spectral analysis techniques were used to investigate the chemical structures of the intermediates and of the product.