The electrochemical behaviour of the altenuene mycotoxin and its acidic properties

The electrooxidation of altenuene (ALT), one of the mycotoxins of the Alternaria alternata genus, on a glassy carbon disk electrode is studied for the first time by using cyclic and square wave voltammetry. From the electrochemical responses, a complex reaction mechanism could be inferred. Values of 1.06×10⁻⁵ cm² s⁻¹, 1.116 V and 2 were determined for the diffusion coefficient, the apparent formal potential and the electron number, respectively, for the overall electrode process by convolution analysis of linear scan voltammograms. Square wave voltammetry was used to generate I_p versus c_ALT* calibration curves for this fungal metabolite. A detection limit of 4.0×10⁻⁷ M was determined for a 2:1 signal to noise ratio. The acid dissociation constant for ALT was determined from conventional UV–vis spectrophotometric measurements. Experimental variations of absorbance as a function of pH at a given wavelength were fitted by using the exact equation that describes the system. Good agreement between the experimental absorbance versus pH plots and the curves generated by the fitting process was found.     

Spectroscopic investigation of the adsorption and oxidation of thiourea on polycrystalline Au and Au(111) in acidic media

In the present paper, a systematic electrochemical investigation on thiourea (TU) electrooxidation was developed on polycrystalline and (111) single-crystal gold electrodes in 0.1 M perchloric acid. The combination of cyclic voltammetry with in situ Fourier transform infrared spectroscopy (FTIRS) and differential electrochemical mass spectrometry techniques have allowed the nature of the species formed during the electroadsorption and electrooxidation of TU to be established. FTIRS experiments were performed in D2O to clean up the region of the H2O bending around 1600 cm(-1). It was concluded that TU adsorbs tilted on the surface in the 0.05-0.40 VRHE potential range. A dual-path reaction mechanism was evidenced in the oxidation process. The first pathway takes place from adsorbed TU at E > 0.40 VRHE and implies the formation of [Au(I)-(TU)2]+, which is oxidized to NH2CN and S0 at E > 0.80 VRHE. In a following oxidation step at E > 1.20 V, N2, CO2, and HSO4-/SO4(2-) were produced. The second parallel reaction occurs from TU in solution at E > 0.50 VRHE to form (TU)2(2+). All these species were characterized from the spectroscopic experiments. Similar results were obtained for both surfaces.     

Intra- and intermolecular fluorescence quenching in 7-(pyridyl)indoles

Three isomeric 7-(pyridyl)indoles reveal very different, solvent-dependent photophysical properties. Due to rapid excited state depopulation involving intramolecular hydrogen bonding, 7-(2′-pyridyl)indole is practically nonfluorescent at room temperature. In nonpolar and polar aprotic solvents, 7-(3′-pyridyl)indole and 7-(4′-pyridyl)indole fluorescence strongly, but the emission is quenched in alcohols. Syn and anti rotameric forms of 7-(3′-pyridyl)indole are detected, each quenched to a different degree. This differential quenching is interpreted as evidence of enhanced S₁ → S₀ internal conversion being more efficient in cyclic solvates, with alcohol molecules forming a bridge between the proton donor and acceptor groups of an excited chromophore.     

Mass spectrometry of rhenium complexes: a comparative study by using LDI‐MS,MALDI‐MS,PESI‐MS and ESI‐MS

A group of rhenium (I) complexes including in their structure ligands such as CF₃SO₃‐, CH₃CO₂‐, CO, 2,2′‐bipyridine, dipyridil[3,2‐a:2′3′‐c]phenazine, naphthalene‐2‐carboxylate, anthracene‐9‐carboxylate, pyrene‐1‐carboxylate and 1,10‐phenanthroline have been studied for the first time by mass spectrometry. The probe electrospray ionization (PESI) is a technique based on electrospray ionization (ESI) that generates electrospray from the tip of a solid metal needle. In this work, mass spectra for organometallic complexes obtained by PESI were compared with those obtained by classical ESI and high flow rate electrospray ionization assisted by corona discharge (HF‐ESI‐CD), an ideal method to avoid decomposition of the complexes and to induce their oxidation to yield intact molecular cation radicals in gas state [M]^+. and to produce their reduction yielding the gas species [M]^–.. It was found that both techniques showed in general the intact molecular ions of the organometallics studied and provided additional structure characteristic diagnostic fragments. As the rhenium complexes studied in the present work showed strong absorption in the UV–visible region, particularly at 355 nm, laser desorption ionization (LDI) mass spectrometry experiments could be conducted. Although intact molecular ions could be detected in a few cases, LDI mass spectra showed diagnostic fragments for characterization of the complexes structure. Furthermore, matrix‐assisted laser desorption ionization (MALDI) mass spectra were obtained. Nor‐harmane, a compound with basic character, was used as matrix, and the intact molecular ions were detected in two examples, in negative ion mode as the [M]^–. species. Results obtained with 2‐[(2E)‐3‐(4‐tert‐buthylphenyl)‐2‐methylprop‐2‐enylidene] malononitrile (DCTB) as matrix are also described. LDI experiments provided more information about the rhenium complex structures than did the MALDI ones. Copyright © 2012 John Wiley & Sons, Ltd.     

Naphthocrown‐Strapped Calix[4]pyrroles: Formation of Self‐Assembled Structures by Ion‐Pair Recognition

A new approach to the construction of self‐assembled structures is reported that is based on ion‐pair recognition. Towards this end, the calix[4]pyrrole naphthocrown‐4 hybrid structures 2 and 3 were prepared. These multitopic receptors contain recognition sites for both anions and cations. On the basis of solution‐phase ¹H NMR spectroscopic analysis and solid‐state single‐crystal X‐ray diffraction structural studies, it was established that receptors 2 and 3 are able to bind specific ion pairs with high selectivity via different binding modes. In the case of CsF and CsCl, the ion‐pair complexes formed from receptors 2 and 3 were found to self‐assemble to produce either linear supramolecular polymeric crystalline solids or nanotube‐like cyclic hexamers depending on the specific choice of ion pairs and crystallization solvents. Proton NMR studies provided evidence for solution‐phase self‐association in organic media.     

Efficient Biocatalytic Degradation of Pollutants by Enzyme‐Releasing Self‐Propelled Motors

The first example of a self‐propelled tubular motor that releases an enzyme for the efficient biocatalytic degradation of chemical pollutants is demonstrated. How the motors are self‐propelled by the Marangoni effect, involving simultaneous release of SDS surfactant and the enzyme remediation agent (laccase) in the polluted sample, is illustrated. The movement induces fluid convection and leads to the rapid dispersion of laccase into the contaminated solution and to a dramatically accelerated biocatalytic decontamination process. The greatly improved degradation efficiency, compared to quiescent solutions containing excess levels of the free enzyme, is illustrated for the efficient biocatalytic degradation of phenolic and azo‐type pollutants. The high efficiency of the motor‐based decontamination approach makes it extremely attractive for a wide‐range of remediation processes in the environmental, defense and public health fields.     

Magnetic mixed matrix membranes in air separation

Ethylcellulose (EC) or linear polyimide (LPI) and magnetic neodymium powder particles MQP-14-12 were used for the preparation of inorganic-organic hybrid membranes. For all the membranes, N₂, O₂ and air permeability were examined. Mass transport coefficients were determined using the Time Lag System based on dynamic experiments in a constant pressure system. The results showed that the membrane permeation properties were improved by the addition of magnetic neodymium particles to the polymer matrix. The magnetic ethylcellulose and polyimide membranes exhibited higher gas permeability and diffusivity, while their permeability selectivity and solubility were either unchanged or slightly increased. Polyimide mixed matrix membranes were characterised by a higher thermal and mechanical stability, larger filler loading, better magnetic properties and reasonable selectivity in the air separation.     

Characterization of an electrochemical mercury sensor using alternating current,cyclic, square wave and differential pulse voltammetry

Here we report the characterization of an electrochemical mercury (Hg²⁺) sensor constructed with a methylene blue (MB)-modified and thymine-containing linear DNA probe. Similar to the linear probe electrochemical DNA sensor, the resultant sensor behaved as a “signal-off” sensor in alternating current voltammetry and cyclic voltammetry. However, depending on the applied frequency or pulse width, the sensor can behave as either a “signal-off” or “signal-on” sensor in square wave voltammetry (SWV) and differential pulse voltammetry (DPV). In SWV, the sensor showed “signal-on” behavior at low frequencies and “signal-off” behavior at high frequencies. In DPV, the sensor showed “signal-off” behavior at short pulse widths and “signal-on” behavior at long pulse widths. Independent of the sensor interrogation technique, the limit of detection was found to be 10 nM, with a linear dynamic range between 10 nM and 500 nM. In addition, the sensor responded to Hg²⁺ rather rapidly; majority of the signal change occurred in <20 min. Overall, the sensor retains all the characteristics of this class of sensors; it is reagentless, reusable, sensitive, specific and selective. This study also highlights the feasibility of using a MB-modified probe for real-time sensing of Hg²⁺, which has not been previously reported. More importantly, the observed “switching” behavior in SWV and DPV is potentially generalizable and should be applicable to most sensors in this class of dynamics-based electrochemical biosensors.     

Thermal behaviour of some novel antimicrobials based on complexes with a Schiff base bearing 1,2,4-triazole pharmacophore

A series of complexes of type [ML(CH₃COO)(OH₂)₂] (M: Co, Ni; HL: 2-[(E)-1H-1,2,4-triazol-3-ylimino)methyl]phenol)) and [M₂L₂(CH₃COO)₂(OH₂)_n] (M: Cu, n = 2; M: Zn, n = 0) were synthesised by template condensation. The compounds were characterised with microanalytical, ESI–MS, IR, electronic, EPR spectra and magnetic data at room temperature. Based on the IR and ESI–MS spectra, a dinuclear structure with the acetate as bridge was proposed for Cu(II) and Zn(II) complexes. The dinuclear structure of Cu(II) complex is also consistent with both magnetic behaviour and EPR spectrum. The thermal analyses have evidenced processes as water elimination, acetate decomposition, as well as oxidative degradation of the Schiff base. The final decomposition product was the most stable metal oxide as indicated by powder X-ray diffraction. The cobalt and copper compounds exhibited a broad spectrum of antibacterial activity towards both planktonic and biofilm-embedded cells. The complexes exhibit a low cytotoxicity except for Cu(II) species that induces the early apoptosis for the HEp 2 cells.     

Synthesis and thermal behavior of new ambazone complexes with some transitional cations

Ambazone is a pharmaceutical compound that possesses antiseptic activity and tested as well for anti-tumor properties. Metal complexes of Zn(II), Fe(III), and Cu(II) containing ambazone as ligand were synthesized using a molar ratio salt:ligand of 1:1, heating the mixture up to 50 °C for 6 h. Coordination compounds were characterized by thin-layer chromatography, FT-IR spectroscopy, elemental analysis, and thermal behavior. The non-isothermal experiments were carried out in order to investigate the thermal degradation process of these complexes and were performed in a dynamic air atmosphere at a heating rate β = 10 °C min^?1 from ambient temperature, up to 500 °C. It was revealed that decomposition process is a multistadial one.