<Emphasis Type="Italic">N</Emphasis>-Alkoxy-3,5-dinitro-4-aminobenzoic acid derivatives with controlled physico-chemical properties

Starting from 4-chloro-3,5-dinitrobenzoic acid 1, compounds 2–10 (N-alkoxy-3,5-dinitro-4-aminobenzoic acid esters where alkoxy stands for methoxy, carboxymethoxy, triphenylmethoxy, or corresponding amides) have been obtained, from which compounds 3–5 and 7–10 are new, and for the known compounds 2 and 6 the synthetic procedure has been improved. The new derivatives have been characterized by appropriate means (IR, UV–Vis, ¹H- and ¹³C-NMR, fluorescence) and their properties were studied. Thus, depending on their structure, the compounds have acid properties, fluorescence and complexing properties with alkaline cations.     

Simultaneous determination of angiotensins II and 1-7 by capillary zone electrophoresis in plasma and urine from hypertensive rats

We describe the procedure developed for the simultaneous detection and quantification of angiotensin II and angiotensin-(1-7), by capillary zone electrophoresis with UV detection by photodiode-array, at a wavelength of 200 nm, in the plasma and urine from hypertensive rats. Optimal separation was achieved with a 100 mM boric acid + 3 mM tartaric acid + 10 fM gold (III) chloride electrolyte solution at pH 9.80. The applied voltage was 30 kV and the capillary temperature was kept constant at 20 °C. The method was over the concentration range of 0.01-500 pmol/mL. All determination coefficients were higher or equal to 0.9985. Limits of detection and quantification for angiotensin II were 0.0110 pmol/mL (S/N = 3) and 0.0195 pmol/mL (S/N = 5), respectively. While for angiotensin-(1-7), the limits were 0.0112 pmol/mL (S/N = 3) and 0.0193 pmol/mL (S/N = 5), respectively. The present method offers a time-saving way to simultaneous determination of angiotensin II and angiotensin-(1-7), since it can be completed in 10 min, compared to other methodologies reported in the literature for capillary electrophoresis and liquid chromatography, which require more than 1 h for analysis of complex matrices, such as plasma and urine. The procedure is illustrated by experiments that quantify simultaneously angiotensin II and angiotensin-(1-7) in plasma and urine from hypertensive and normotensive rats, with and without antihypertensive treatment. The levels of angiotensin II and angiotensin-(1-7) detected in the experimental model, resulted in a recovery of 99.00-106.01% and a reproducibility of less than 10%. The proposed analytical method is a use full tool for the simultaneous detection of angiotensin II and angiotensin-(1-7) implicated in vascular remodeling in pathologies such as hypertension.     

Thermal behavior study of biodiesel standard reference materials

Quality control of fuel-related properties of biodiesel, such as thermal stability, is needed to obtain consistent engine performance by fuel users, since biodiesel is susceptible to auto-oxidation when exposed to air, light, and temperature during storage. In this work two pure standard reference materials of biodiesels produced from soy oil and animal feedstocks were studied. Differential scanning calorimetry and thermogravimetry measurements were performed and the analysis of the results revealed small temperature variations in the thermal events among the two standards, these differences are due mainly to their chemical composition, been highly influenced by the amounts of unsaturated esters.     

Further Studies on Homo- and Copolymerization of Styrene through Metallocenic Initiator Systems

Summary: Binary metallocene-MAO and ternary diphenylzinc-metallocene-MAO initiator systems have been tested as initiators in the homopolymerization of styrene and also in its copolymerization with several diverse comonomers including substituted styrenes, styrene derivatives, α-olefins and dienes. Various titanocenes and zirconocenes and some exploratory experiment with hafnocene were carried out. The results indicate that titanocenes were more effective than zirconocenes in the homopolymerization of styrene while zirconocenes did better in α-olefin polymerization. It was found that titanocenes generated mainly syndiotactic polystyrene, s-PS, while zirconocenes yielded atactic polystyrene or, depending on the zirconocene, a low percentage of s-PS. For these types of initiators the polymerization process depends largely on the inductive effect of the substituents linked to the benzene ring of styrene and on its position (ortho, meta or para). Substituent multiplicity reduced markedly the effectiveness of these initiator systems. Styrene/isoprene polymerization was also studied using binary zirconocene-MAO initiator systems that yielded low conversions and also low molecular weight polymers.     

Synthesis of (Z)-tributylstannyl enynes: systematic studies of Sonogashira cross-coupling reactions between (E)-1-iodovinyl-1-tributylstannanes and terminal acetylenes using amines or tetrabutylammonium hydroxide (TBAOH) as activator

Sonogashira cross-coupling reactions involving (E)-iodo vinyl stannanes and terminal acetylenes were carried out in the presence of Pd(PPh₃)₄, CuI and several amines, affording (Z)-tributylstannyl enynes in moderate to good yields (62-91%). Utilizing the catalytic system containing Pd(PPh₃)₄ (5%), CuI (10%), and TBAOH (40% in aqueous media) as activator, better yields (72-91%) and lower reaction times were achieved.     

Studies on the adsorption of cell impurities from plasmid-containing lysates to phenyl boronic acid chromatographic beads

Plasmid DNA (pDNA) is purified directly from alkaline lysis-derived Escherichia coli (E. coli) lysates by phenyl boronate (PB) chromatography. The method explores the ability of PB ligands to bind covalently, but reversibly, to cis-diol-containing impurities like RNA and lipopolysaccharides (LPS), leaving pDNA in solution. In spite of this specificity, cis-diol free species like proteins and genomic DNA (gDNA) are also removed. This is a major advantage since the process is designed to keep the target pDNA from binding. The focus of this paper is on the study of the secondary interactions between the impurities (RNA, gDNA, proteins, LPS) in a pDNA-containing lysate and 3-amino PB controlled pore glass (CPG) matrices. Runs were designed to evaluate the role of adsorption buffer composition, feed type (pH, salt content), CPG matrix and sample pretreatment (RNase A, isopropanol precipitation). Water was chosen as the adsorption buffer over MgCl(2) solutions since it maximised pDNA yield (96.2±4.9%) and protein removal (61.3±3.0%), while providing for a substantial removal of RNA (65.5±3.5%) and gDNA (44.7±14.1%). Although the use of pH 3.5 maximised removal of impurities (~75%), the best compromise between plasmid yield (~96%) and RNA clearance (~60-70%) was obtained for a pH of 5.2. Plasmid yield was maximal (>96%) when the concentration of acetate and potassium ions in the incoming lysate feed were 1.7 M and 1.0 M, respectively. The pre-treatment of lysates with RNase A deteriorated the performance since the resulting oligoribonucleotides lack the cis-diol group at their 3' termini. Overall, the results support the idea that charge transfer interactions between the boron atom at acidic pH and electron donor groups in the aromatic bases of nucleic acids and side residues of proteins are responsible for the non-specific removal of gDNA, RNA and proteins.     

Prediction of self-diffusion coefficient and shear viscosity of water and its binary mixtures with methanol and ethanol by molecular simulation

Density, self-diffusion coefficient, and shear viscosity of pure liquid water are predicted for temperatures between 280 and 373 K by molecular dynamics simulation and the Green-Kubo method. Four different rigid nonpolarizable water models are assessed: SPC, SPC/E, TIP4P, and TIP4P/2005. The pressure dependence of the self-diffusion coefficient and the shear viscosity for pure liquid water is also calculated and the anomalous behavior of these properties is qualitatively well predicted. Furthermore, transport properties as well as excess volume and excess enthalpy of aqueous binary mixtures containing methanol or ethanol, based on the SPC/E and TIP4P/2005 water models, are calculated. Under the tested conditions, the TIP4P/2005 model gives the best quantitative and qualitative agreement with experiments for the regarded transport properties. The deviations from experimental data are of 5% to 15% for pure liquid water and 5% to 20% for the water + alcohol mixtures. Moreover, the center of mass power spectrum of water as well as the investigated mixtures are analyzed and the hydrogen-bonding structure is discussed for different states.