Electrocatalytic hydrogen redox chemistry on gold nanoparticles

Electrocatalytic proton reduction leading to the formation of adsorbed molecular hydrogen on gold nanoparticles of 1-3 and 14-16 nm diameter stabilized by 1-mercapto-undecane-11-tetra(ethyleneglycol) has been demonstrated by cyclic voltammetry using a hanging mercury drop electrode. The nanoparticles were adsorbed to the electrode from aqueous dispersion and formed robust surface layers transferrable to fresh base electrolyte solutions. Unique electrocatalytic proton redox chemistry was observed that has no comparable counterpart in the electrochemistry of bulk gold electrodes. Depending on size, the nanoparticles have a discrete number of electrocatalytically active sites for the two-electron/two-proton reduction process. The adsorbed hydrogen formed is oxidized with the reverse potential sweep. These findings represent a new example of qualitative different behavior of nanoparticles in comparison with the corresponding bulk material.     

Connection between the upper and lower energy regions of the potential energy surface of the ground electronic state of the HSO2 system

The importance of the HSO(2) system in atmospheric and combustion chemistry has motivated several works dedicated to the study of associated structures and chemical reactions. Nevertheless, controversy still exists about a possible connection between the upper and lower energy regions of the potential energy surface (PES) for the ground electronic state of the system. Very recently, a path to connect these regions was proposed based on studies at the CASPT2/aug-cc-pV(T+d)Z level of calculation but the small energy difference between some of the transitions states along that path suggested the necessity of calculations at a higher level of theory. In the present work, we report a CCSD(T)/aug-cc-pV(T+d)Z study of the stationary states associated to the proposed connection path, including assessment of the most reliable complete basis set (CBS) extrapolation scheme for the system. Among the new features, the present calculations show that there are no structures corresponding to the HSO(2)(b) minimum and the TS3 saddle point obtained at the CASPT2 level and that the connection path between the upper and lower energy regions of the PES for the ground electronic state involves only one transition state and most probably more than one electronic state.     

Organic nanoparticles whose size and rigidity are finely tuned by cross-linking the end groups of dendrimers

Dendrimers with molecular weights ranging from ca. 2700 to 11 000 and from 16 to 64 homoallyl ether end groups were cross-linked using the Grubbs ring-closing metathesis reaction. A combination of SEC, MALDI-TOF-MS, and AFM were used to characterize the cross-linked nanoparticles. The data suggest a significant decrease in volume with cross-linking and a concomitant increase in rigidity, both of which can be controlled independently with a fair degree of precision.     

Ab initio calculations and vibrational energy level fits for the lower singlet potential-energy surfaces of C3

Ab initio multireference configuration interaction potential energy surfaces are computed for the eight lowest singlet surfaces of C(3). These reveal several important features, including several conical intersections in linear, nonlinear, and equilateral triangle geometries. These intersections are important because, particularly for the excited A (1)Pi(u) state, reasonable ab initio results could only be obtained by including nearby, near degenerate, (1)Sigma(u) (-) and (1)Delta(u) states that cross the A (1)Pi(u) state around 4500 cm(-1) above the equilibrium geometry, and a (1)Pi(g) state whose potential in turn crosses the other states about 2000 cm(-1) further up. These states are probably responsible for the complexity of the shorter wavelength UV absorption spectrum of C(3). The computed potential energy surface for the ground, X (1)Sigma(g) (+), state and for the lowest two excited singlet surfaces (which both correlate with the A (1)Pi(u) state in a collinear geometry) are fitted to analytic functional forms. Vibrational energy levels are calculated for both states, taking account of the Renner-Teller coupling in the excited A (1)Pi(u) state. The potential parameters for both states are then least-squares fitted to experimental data. The ground-state fit covers a range of approximately 8500 cm(-1) above the lowest level, and reproduces 100 observed vibrational levels with an average error of 2.8 cm(-1). The A (1)Pi(u) state surfaces cover a range of 3250 cm(-1) above the zero-point level, and reproduce the 44 observed levels in this range with an average error of 2.8 cm(-1).     

Simultaneous determination of copper and lead in ethanol fuel by anodic stripping voltammetry

The presence of trace metals in car fuels plays an important role in the engine maintenance. In addition, these metals contribute for the environmental contamination in big cities and their control is necessary. Square Wave Stripping Voltammetry (SWSV) is a very sensitive technique for elemental trace determination and was applied for ethanol fuel analysis. The first studies were done searching for the best conditions for copper determination in alcoholic medium, utilizing gold electrodes. During these studies, the possibility of the simultaneous determination of copper and lead in the same experiment was observed. Two procedures for the analysis of these metals were adopted: The direct quantification of metals in alcohol–water mixtures and a second way that involves the evaporation of the organic solvent and re-suspension of the ions with water+electrolyte. Good recovery values were obtained for synthetic samples spiked with known amounts of metals. The results obtained for the two methods were in good agreement. The detection limits for copper and lead in 75% ethanol–water ratio solution were calculated as 120 and 235 ng l⁻¹, respectively, for 15-min deposition time.     

A liquid-liquid extraction procedure followed by a low temperature purification step for the analysis of macrocyclic lactones in milk by liquid chromatography-tandem mass spectrometry and fluorescence detection

In this work a method is proposed and demonstrated for the analysis of the macrocyclic lactones abamectin, doramectin, eprinomectin, ivermectin and moxidectin in bovine milk by liquid chromatography coupled to mass spectrometry (LC-MS/MS) and liquid chromatography with fluorescence detection (LC-FL). The method is based on liquid-liquid extraction followed by a low temperature purification (LLE-LTP) step. Moreover, the proposed method was validated according to the Commission Decision 2002/657/EC, using LC-MS/MS and LC-FL for confirmatory and quantitative analysis, respectively. For LC-MS/MS the recovery rates observed ranged from 101.2 to 141.6% with coefficient of variation from 2.6 to 19.8%. For LC-FL the recovery rates observed ranged from 100.2 to 105% and coefficient of variations from 2.9 to 8.8%. Matrix effects were negligible due to the low temperature purification step. The quantification limits were far below the maximum limits established by regulations of all countries consulted. The proposed method proved to be simple, easy, and adequate for high-throughput analysis of a large number of samples per day at low cost.     

Stabilizing carbon-lithium stars

We have explored in silico the potential energy surfaces of the C(5)Li(n)(n-6) (n = 5, 6, and 7) clusters using the Gradient Embedded Genetic Algorithm (GEGA) and other computational strategies. The most stable forms of C(5)Li(5)(-) and C(5)Li(6) are two carbon chains linked by two lithium atoms in a persistent seven membered ring capped by two Li atoms. The other Li atoms are arrayed on the edge of the seven membered ring. In contrast, the global minimum structure for C(5)Li(7)(+) is a bicapped star of D(5h) symmetry. The molecular orbital analysis and computed magnetic field data suggest that electron delocalization, as well as the saturation of the apical positions of the five-membered carbon ring with lithium atoms in C(5)Li(7)(+) plays a key role in the stabilization of the carbon-lithium star. In fact, the planar star sub-structure for the carbon ring are unstable without the apical caps. This is also what has been found for the Si analogues. The split of the B(ind)(z) in its σ- and π-contribution indicates that C(5)Li(7)(+) is a π-aromatic and σ-nonaromatic system.     

Electrochemical Oxidation of Ibuprofen and Its Voltammetric Determination at a Boron‐Doped Diamond Electrode

The electrochemical oxidation of ibuprofen at a boron‐doped diamond electrode (BDDE) and its voltammetric determination is reported for the first time. A well‐defined oxidation peak was observed at around 1.6 V in 0.1 mol L^?1 H₂SO₄ solution with 10 % (v/v) ethanol at the BDDE surface activated by either cathodic or anodic pretreatments. A differential‐pulse voltammetric method for the determination of ibuprofen in pharmaceutical formulations was optimized with a detection limit of 5 µmol L^?1 and compared with the British Pharmacopeia method.     

Analysis of the hydrogen and oxygen stable isotope ratios of beverage waters without prior water extraction using isotope ratio infrared spectroscopy

Hydrogen (δ²H) and oxygen (δ¹⁸O) stable isotope analysis is useful when tracing the origin of water in beverages, but traditional analytical techniques are limited to pure or extracted waters. We measured the isotopic composition of extracted beverage water using both isotope ratio infrared spectroscopy (IRIS; specifically, wavelength‐scanned cavity ring‐down spectroscopy) and isotope ratio mass spectrometry (IRMS). We also analyzed beer, sodas, juices, and milk ‘as is’ using IRIS. For IRIS analysis, four sequential injections of each sample were measured and data were corrected for sample‐to‐sample memory using injections (a) 1‐4, (b) 2‐4, and (c) 3‐4. The variation between δ²H and δ¹⁸O values calculated using the three correction methods was larger for unextracted (i.e., complex) beverages than for waters. The memory correction was smallest when using injections 3‐4. Beverage water δ²H and δ¹⁸O values generally fit the Global Meteoric Water Line, with the exception of water from fruit juices. The beverage water stable isotope ratios measured using IRIS agreed well with the IRMS data and fit 1:1 lines, with the exception of sodas and juices (δ²H values) and beers (δ¹⁸O values). The δ²H and δ¹⁸O values of waters extracted from beer, soda, juice, and milk were correlated with complex beverage δ²H and δ¹⁸O values (r = 0.998 and 0.997, respectively) and generally fit 1:1 lines. We conclude that it is possible to analyze complex beverages, without water extraction, using IRIS although caution is needed when analyzing beverages containing sugars, which can clog the syringe and increase memory, or alcohol, a known spectral interference. Copyright © 2010 John Wiley & Sons, Ltd.     

A Pressure‐Induced Inverse Order–Disorder Transition in Double Perovskites

Given the consensus that pressure improves cation ordering in most of known materials, a discovery of pressure‐induced disordering could require recognition of an order–disorder transition in solid‐state physics/chemistry and geophysics. Double perovskites Y₂CoIrO₆ and Y₂CoRuO₆ polymorphs synthesized at 0, 6, and 15 GPa show B‐site ordering, partial ordering, and disordering, respectively, accompanied by lattice compression and crystal structure alteration from monoclinic to orthorhombic symmetry. Correspondingly, the long‐range ferrimagnetic ordering in the B‐site ordered samples are gradually overwhelmed by B‐site disorder. Theoretical calculations suggest that unusual unit‐cell compressions under external pressures unexpectedly stabilize the disordered phases of Y₂CoIrO₆ and Y₂CoRuO₆.