On the estimation of the reaction mechanisms of thermal decomposition of solids from the fraction reacted at the maximum reaction rate

A procedure is developed for determining equilibrium constants of reactions of the type: A (solid) ? B (solid) + C (gas) from TG data. The method is based upon the overlapping of both formation and decomposition TG diagrams when an appropriate heating rate is applied.     

Study of Langmuir and Langmuir-Blodgett films of odorant-binding protein/amphiphile for odorant biosensors

To make ultrathin films for the fabrication of artificial olfactory systems, odorant biosensors, we have investigated mixed Langmuir and Langmuir-Blodgett films of odorant-binding protein/amphiphile. Under optimized experimental conditions (phosphate buffer solution, pH 7.5, OBP-1F concentration of 4 mg L(-1), target pressure 35 mN m(-1)), the mixed monolayer at the air/water interface is very stable and has been efficiently transferred onto gold supports, which were previously functionalized by self-assembled monolayers (SAMs) with 1-octadecanethiol (ODT). Atomic force microscopy and electrochemical impedance spectroscopy were used to characterize mixed Langmuir-Blodgett (LB) films before and after contact with a specific odorant molecule, isoamyl acetate. AFM phase images show a higher contrast after contact with the odorant molecule due to the new structure of the OBP-1F/ODA LB film. Non-Faradaic electrochemical spectroscopy (EIS) is used to quantify the effect of the odorant based on the electrical properties of the OBP-1F/ODA LB film, as its resistance strongly decreases from 1.18 MOmega (before contact) to 25 kOmega (after contact).     

Pentacoordinate nickel(II) complexes double bridged by phosphate ester or phosphinate ligands: spectroscopic, structural, kinetic, and magnetic studies

The bis(phosphatediester)-bridged complexes [[Ni([12]aneN(3))(mu-O(2)P(OR)(2))](2)](PF(6))(2) [[12]aneN(3)=Me(3)[12]aneN(3), 2,4,4-trimethyl-1,5,9-triazacyclododec-1-ene; R=Me (1), Bu (2), Ph (3), Ph-4-NO(2) (4); [12]aneN(3)=Me(4)[12]aneN(3), 2,4,4,9-tetramethyl-1,5,9-triazacyclododec-1-ene; R=Me (5), Bu (6), Ph (7), Ph-4-NO(2) (8)] were prepared by hydrolysis of the phosphate triester with the hydroxo complex [[Ni([12]aneN(3))(mu-OH)](2)](PF(6))(2) or by acid-base reaction of the dialkyl or diaryl phosphoric acid and the above hydroxo complex. The acid-base reaction was also used to synthesise the phosphinate-bridged complexes [[Ni([12]aneN(3))(mu-O(2)PR(2))](2)](PF(6))(2) [[12]aneN(3)=Me(3)[12]aneN(3), R=Me (9), Ph (10); [12]aneN(3)=Me(4)[12]aneN(3), R=Me (11), Ph (12)]. The molecular structures of complexes 2, 3 and 12 were established by single crystal X-ray diffraction studies. The eight-membered rings defined by the nickel atoms and the bridging ligands show distorted twist-boat, chair and boat-boat conformations in 2, 3 and 12, respectively. The experimental susceptibility data for compounds 2, 3 and 12 were fitted by least-squares methods to the analytical expression given by Ginsberg. The best fit was obtained with values of J=-0.11 cm(-1), D=-9.5 cm(-1) and g=2.20 for 2; J=-0.97 cm(-1), D=-9.3 cm(-1) and g=2.21 for 3; and J=-0.14 cm(-1), D=-11.9 cm(-1) and g=2.195 for 12. The magnetic-exchange pathways must involve the phosphate/phosphinate bridges, because these favour antiferromagnetic interactions. The observation of a higher exchange parameter for compound 3 is a consequence of a favourable disposition of the O-P-O bridges. The kinetics for the hydrolysis of TNP (tris(4-nitrophenyl)phosphate) with the dinuclear nickel(II) hydroxo complex [[Ni(Me(3)[12]aneN(3))(mu-OH)](2)](PF(6))(2) was studied by UV-visible spectroscopy. The proposed mechanism for TNP-promoted hydrolysis can be described as one-substrate/two-product, and can be fitted to a Michaelis-Menten equation.     

Effect of the roughness factor on the surface oxidation of ruthenium catalysts

The surface oxidation of ruthenium catalysts with different roughness factor values has been analyzed. It is shown that electro formation of oxidized species on the exposed surface of ruthenium is strongly affected by the rougher characteristics of the surface. This effect has been explained through the addition and removal of protons to and from the oxidized species.

---

. , . .

     

Molybdenum amido complexes with single Mo-N bonds: synthesis,structure, and reactivity

Reactions of the complex [MoCl(eta(3)-C(3)H(4)-Me-2)(CO)(2)(phen)] (1) (phen=1,10-phenanthroline) with potassium arylamides were used to synthesize the amido complexes [Mo(N(R)Ar)(eta(3)-C(3)H(4)-Me-2)(CO)(2)(phen)] (R=H, Ar=Ph, 2 a; R=H, Ar=p-tolyl, 2 b; R=Me, Ar=Ph; 2 c). For 2 b the Mo-N(amido) bond length (2.105(4) A) is consistent with it being a single bond, with which the metal attains an 18-electron configuration. The reaction of 2 b with HOTf affords the amino complex [Mo(eta(3)-C(3)H(4)-Me-2)(NH(2)(p-tol))(CO)(2)(phen)]OTf (3-OTf). Treatment of 3-OTf with nBuLi or KN(SiMe(3))(2) regenerates 2 b. The new amido complexes react with CS(2), arylisothiocyanates and maleic anhydride. A single product corresponding to the formal insertion of the electrophile into the Mo-N(amido) bond is obtained in each case. For maleic anhydride, ring opening accompanied the formation of the insertion product. The reaction of 2 b with maleimide affords [Mo(eta(3)-C(3)H(4)-Me-2)[NC(O)CH=CHC(O)](CO)(2)(phen)] (7), which results from simple acid-base metathesis. The reaction of 2 b with (p-tol)NCO affords [[Mo(eta(3)-C(3)H(4)-Me-2)(CO)(2)(phen)](2)(eta(2)-MoO(4))] (8), which corresponds to oxidation of one third of the metal atoms to Mo(VI). Complex 8 was also obtained in the reactions of 2 b with CO(2) or the lactide 3,6-dimethyl-1,4-dioxane-2,5-dione. The structures of the compounds 2 b, 3-OTf, [Mo(eta(3)-C(3)H(4)-Me-2)[SC(S)(N(H)Ph)](CO)(2)(phen)] (4), [Mo(eta(3)-C(3)H(4)-Me-2)[SC(N(p-tol))(NH(p-tol))](CO)(2)(phen)] (5 a), and [Mo(eta(3)-C(3)H(4)-Me-2)[OC(O)CH=CHC(O)(NH(p-tol))](CO)(2)(phen)] (6), 7, and 8 (both the free complex and its N,N'-di(p-tolyl)urea adduct) were determined by X-ray diffraction.     

A chemical inhibitor reveals the role of Raf kinase inhibitor protein in cell migration

Raf kinase inhibitor protein (RKIP) is a modulator of cell signaling that functions as an endogenous inhibitor of multiple kinases. We demonstrate here a positive role for RKIP in the regulation of cell locomotion. We discovered that RKIP is the relevant cellular target of locostatin, a cell migration inhibitor. Locostatin abrogates RKIP's ability to bind and inhibit Raf-1 kinase, and it acts by disrupting a protein-protein interaction, an uncommon mode of action for a small molecule. Small interfering RNA-mediated silencing of RKIP expression also reduces cell migration rate. Overexpression of RKIP converts epithelial cells to a highly migratory fibroblast-like phenotype, with dramatic reduction in the sensitivity of cells to locostatin. RKIP is therefore the compound's valid target and a key regulator of cell motility.     

Theoretical rotational-vibrational spectra of theX 3 B 1,a 1 A 1 andb 1 B 1 states of NH 2 +

Summary The three-dimensional potential energy functions have been calculated from highly correlated multireference configuration interaction electronic wavefunctions for theX ³ B ₁,a ¹ A ₁, andb ¹ B ₁ states of the NH ₂ ⁺ ion. For the quasi-linear electronic ground state this information and the electric dipole moment functions have been used to calculate spectroscopic constants, line intensities and rotationally resolved absorption spectra. For thea ¹ A ₁-b ¹ B ₁ bent/quasi-linear Renner-Teller system ro-vibronic energy levels have been obtained from a variational approach accounting for anharmonicity, rotation-vibration and electronic angular momenta coupling effects. The vibronic levels are given for energies up to 13 500 cm^–1 for the bending levels and up to 8000 cm^–1 for the stretching and combination levels.Dedicated in the honor of Prof. Werner Kutzelnigg     

Evaluation of capillary isoelectric focusing in glycerol-water media with a view to hydrophobic protein applications

Capillary isoelectric focusing (CIEF) separations are usually performed with neutral coated fused-silica capillaries in aqueous anticonvective media. Glycerol, a very viscous solvent (eta = 945 mPa x s at 25 degrees C), known to help stabilize any kind of proteins and solubilize hydrophobic ones, was tested as an alternative to using commercial gels. Viscosity and electroosmotic mobility were measured as a function of gel or glycerol content in water, and a 30:70 v/v glycerol-water medium appeared as a good compromise for performing CIEF in a bare fused-silica capillary without imposing too high a viscosity. To demonstrate the feasibility of this new CIEF system, a standard mixture of nine model proteins was separated according to their pI with a good agreement between experimental and literature aqueous pIs. Moreover, better resolution was achieved with this system than with the conventional aqueous CIEF system, as two of the model proteins could not be separated in the latter system. Glycerol-water CIEF in bare silica capillary was next applied to the separation of horse radish peroxidase, a complex mixture of protein isoforms. The good concordance with the separation obtained by the conventional CIEF system indicated the adequacy of this new system. Finally, as anticipated from the results obtained for the separation of bacteriorhodopsin, a membrane protein, glycerol-water CIEF performed in bare silica capillary appears to be a promising alternative to conventional aqueous CIEF for hydrophobic protein characterization, under their native form.     

Surface phase behavior and microstructure of lipid/PEG-emulsifier monolayer-coated microbubbles

Langmuir trough methods and fluorescence microscopy were combined to investigate the phase behavior and microstructure of monolayer shells coating micron-scale bubbles (microbubbles) typically used in biomedical applications. The monolayer shell consisted of a homologous series of saturated acyl chain phospholipids and an emulsifier containing a single hydrophobic stearate chain and polyethylene glycol (PEG) head group. PEG-emulsifier was fully miscible with expanded phase lipids and phase separated from condensed phase lipids. Phase coexistence was observed in the form of dark condensed phase lipid domains surrounded by a sea of bright, emulsifier-rich expanded phase. A rich assortment of condensed phase area fractions and domain morphologies, including networks and other novel structures, were observed in each batch of microbubbles. Network domains were reproduced in Langmuir monolayers under conditions of heating–cooling followed by compression–expansion, as well as in microbubble shells that underwent surface flow with slight compression. Domain size decreased with increased cooling rate through the phase transition temperature, and domain branching increased with lipid acyl chain length at high cooling rates. Squeeze-out of the emulsifier at a surface pressure near 35 mN/m was indicated by a plateau in Langmuir isotherms and directly visualized with fluorescence microscopy, although collapse of the solid lipid domains occurred at much higher surface pressures. Compression of the monolayer past the PEG-emulsifier squeeze-out surface pressure resulted in a dark shell composed entirely of lipid. Under certain conditions, the PEG-emulsifier was reincorporated upon subsequent expansion. Factors that affect shell formation and evolution, as well as implications for the rational design of microbubbles in medical applications, are discussed.     

Synthesis of new 6-substituted purinyl-5′-nor-1′-homocarbanucleosides based on indanol

A series of new 6-substituted purinyl-5′-nor-1′-homocarbanucleosides based on indanol were synthesized from (±)-cis-3-hydroxymethyl-1-indanol, an appropriately functionalized derivative of which was reacted with 6-chloropurine in the presence of NaH and 18-crown-6 ether to prepare a key intermediate that gave access to the target molecules, purinylcarbanucleosides in which position 6 is occupied by a chloro, hydroxy, methoxy, amino or substituted phenyl group.