Particle Size Characterization of an Extra Fine Milled Product

The present research aims to characterize the particle size distribution of sub micron particles suspended in a liquid. The particles milled are an organic poorly water soluble crystalline product. To characterize the size of these particles, different techniques have been tested: imaging techniques (SEM, CryoTEM), static light scattering techniques, dynamic light scattering techniques, centrifugation and flow field flow fractionation. The results indicate that the studied milled particles have a primary particle size close to 180nm and there is strong evidence of larger particles which are very likely aggregates. This is clearly seen from the Cryo TEM results. All the above mentioned techniques should in principle be able to measure samples of dispersion containing particles of ca 180 nm but several are disturbed by the presence of large aggregates. It is difficult to estimate the amount of aggregate present, but most of the time one is interested in what the primary particle size distribution is. It is clear that no single piece of equipment is capable of exactly determining the particle size distribution of our samples, but the static light scattering with low shear on mixing does give a good representation of what is seen with the image analysis by cryo TEM.     

A multiple regression model for urban traffic noise in Hong Kong

This article describes the roadside traffic noise surveys conducted in heavily built-up urban areas in Hong Kong. Noise measurements were carried out along 18 major roads in 1999. The measurement data included L10, L50, L90, Leq, Lmax, the number of light vehicles, the number of heavy vehicles, the total traffic flow, and the average speed of vehicles. Statistical analysis using the analysis of variance (ANOVA) and Tukey test (p<0.05) reveals that the total traffic flow and the number of heavy vehicles are the most significant factors of urban traffic noise. Multiple regression was used to derive a set of empirical formulas for predicting L10 noise level due to road traffic. The accuracy of these empirical formulas is quantified and compared to that of another widely used prediction model in Hong Kong--the Calculation of Road Traffic Noise. The applicability of the selected multiple regression model is validated by the noise measurements performed in the winter of 2000.     

Real-time analysis of partially polarized light with a space-variant subwavelength dielectric grating

A novel method for real-time polarization measurement is presented. The method is based on a space-variant wave plate that we realized as a computer-generated space-variant subwavelength dielectric grating. The Stokes parameters of the incident beam are determined by Fourier analysis of the space-variant intensity transmitted through the grating and an analyzer. We discuss the design and realization of such wave plates and demonstrate our technique with polarization measurements of both polarized and partially polarized CO(2)-laser radiation at a wavelength of 10.6 mum.     

Experimental and theoretical study of the mechanism for the kinetic of elimination of methyl carbazate in the gas phase

The elimination kinetic of methyl carbazate in the gas phase was determined in a static system over the temperature range of 340–390 °C and pressure range of 47–118 Torr. The reaction is homogeneous, unimolecular, and obeys a first order rate law. The decomposition products are methyl amine, nitrous acid, and CO gas. The variation of the rate coefficients with temperatures is given by the Arrhenius expression: log k₁ (s^?1) = (11.56 ± 0.34) ? (180.7 ± 4.1) kJ mol^?1(2.303 RT)^?1. The estimated kinetics and thermodynamics parameters are in good agreement to the experimental values using B3LYP/6‐31G (d,p), and MP2/6‐31G (d,p) levels of theory. These calculations imply a molecular mechanism involving a concerted non‐synchronous quasi three‐membered ring cyclic transition state to give an unstable intermediate, 1,2‐oxaziridin‐3‐one. Bond order analysis and natural charges implies that polarization of O (alkyl)? C (alkyl) bond of the ester is rate determining in this reaction. Copyright © 2008 John Wiley & Sons, Ltd.     

A strip-shield improves the efficiency of a solenoid coil in probes for high-field solid-state NMR of lossy biological samples

A strip-shield inserted between a high inductance double-tuned solenoid coil and the glass tube containing the sample improves the efficiency of probes used for high-field solid-state NMR experiments on lossy aqueous samples of proteins and other biopolymers. A strip-shield is a coil liner consisting of thin copper strips layered on a PTFE (polytetrafluoroethylene) insulator. With lossy samples, the shift in tuning frequency is smaller, the reduction in Q, and RF-induced heating are all significantly reduced when the strip-shield is present. The performance of 800 MHz ¹H/¹⁵N and ¹H/¹³C double-resonance probes is demonstrated on aqueous samples of membrane proteins in phospholipid bilayers.     

Measurements of F2 and xF(nu)(3) - xF(nu;)(3) from CCFR nu(mu)-Fe and nu;(mu)-Fe Data in a Physics Model-Independent Way

We report on the extraction of the structure functions F2 and DeltaxF(3) = xF(nu)(3)-xF(nu;)(3) from CCFR nu(mu)-Fe and nu;(mu)-Fe differential cross sections. The extraction is performed in a physics model-independent (PMI) way. This first measurement of DeltaxF(3), which is useful in testing models of heavy charm production, is higher than current theoretical predictions. The ratio of the F2 (PMI) values measured in nu(mu) and mu scattering is in agreement (within 5%) with the predictions of next-to-leading-order parton distribution functions using massive charm production schemes, thus resolving the long-standing discrepancy between the two sets of data.     

Large area bolometers for millimeter-wave power calibration

An accurate monolithic power meter has been developed for millimeter-wave applications. The detector is a large-area Bismuth bolometer, integrated on a fused-Quartz substrate. It simply measures the temperature change caused by the absorption of millimeter-wave radiation. The power meter is simple to fabricate, inexpensive, and can be easily calibrated using a low-frequency network. The measured responsivity for a 50 bolometer, with an area of 1×1cm, at a bias of 1V. and a video modulation of 100Hz, is 1mV/W. The noise spectrum exhibits a 1/f rolloff till 1KHz, and is limited by the Johnson noise for higher frequencies. The NEP of the detector is 3WHz^–1/2 at a video modulation of 1KHz. It is possible to decrease the current NEP by fabricating bolometers with higher responsivities. Possible application areas are absolute power calibration and localized power density measurements at millimeter and submillimeter wavelengths.     

Spectral Investigation of Phosphorus Compounds in Spinacia Oleracea Using Fourier Transform Infrared Method

The study uses the Fourier transform infrared spectroscopy method to evaluate the influence of phosphogypsum from the soil on the growth and accumulation of nutrients in Spinacia oleracea. Attenuated total reflectance spectra of Spinacia oleracea roots and stems originated from plants cultivated on 28% to 52% phosphogypsum enriched soil have been studied in the 4000–600 cm^?1 area. The structure of the infrared absorption bands for spinach roots and stems and for the soil where plants were grown was analyzed. Thus, it was observed that phosphorus–oxygen bonds contribution can be identified both in roots and stems absorption spectra. The significance of the research is the possibility to use the infrared investigation as rapid technique, particularly useful for agriculture, to study the extraction and assimilation process of the compounds containing phosphorus and nitrogen from the soil in which the spinach seedlings grew. In the case of this study, it was observed that the absorption of phosphorus in the spinach roots and stems has not the same effect. The analysis of obtained data indicated that the assimilation of phosphorus from phosphogypsum enriched soil induces changes in spinach roots structure that are most likely due to an increase synthesis of proteins, rather than to a decrease in carbohydrates quantity.     

Entangling different degrees of freedom by quadrature squeezing cylindrically polarized modes

Quantum systems such as, for example, photons, atoms, or Bose-Einstein condensates, prepared in complex states where entanglement between distinct degrees of freedom is present, may display several intriguing features. In this Letter we introduce the concept of such complex quantum states for intense beams of light by exploiting the properties of cylindrically polarized modes. We show that already in a classical picture the spatial and polarization field variables of these modes cannot be factorized. Theoretically it is proven that by quadrature squeezing cylindrically polarized modes one generates entanglement between these two different degrees of freedom. Experimentally we demonstrate amplitude squeezing of an azimuthally polarized mode by exploiting the nonlinear Kerr effect in a specially tailored photonic crystal fiber. These results display that such novel continuous-variable entangled systems can, in principle, be realized.