Development of monolithic enzymatic reactors in glass microchips for the quantitative determination of enzyme substrates using the example of glucose determination via immobilized glucose oxidase

A one-step procedure for the immobilization of glucose oxidase in fused-silica capillaries and in glass microchips was developed based on enzyme entrapment in a polyacrylamide-based monolithic column. The inner capillary surface was silanized with gamma-methacryloxypropyltrimethoxysilane (gamma-MAPS) to allow covalent binding of the gel to the surface. The composition of the polymer was optimized to prevent the formation of bubbles, allow liquid transportation by electroosmotic flow and to maintain the enzymatic activity. These requirements resulted in the addition of polyethylene glycol and poly(acrylic acid) to the acrylamide mixture. The gel containing the enzyme was formed in situ in the capillaries, respectively, in one channel of the microchip. In the microchip, it was limited to the sample injection channel by accordingly controlled silanization of the inner capillary surface. Glucose was detected via the amperometric determination of hydrogen peroxide. A linear correlation between signals and glucose concentration was observed from 0.05 to 1.1 mM glucose with a correlation coefficient of 0.999. The enzymatic monolithic microreactor showed no loss of activity during 8 h of continuous use and during storage in the running buffer at 4 degrees C for about 2 months. Interferents, such as ascorbic acid, were separated from the analyte electrophoretically, so that glucose could be quantified in diluted juices.     

Stability Of 2-Carboxyphenylhydrazoacetoacetanilide,and 2-Carboxyphenylhydrazobenzoylacetone Complexes of Rare-Earth Elements in Mixed Solvents

The overall stability constants of the 1:1 and 2:1 2-Carboxyphenylhydrazoacetoacetanilide (2-CPHAAA) and 2-Carboxyphenylhydrazobenzoylacetone (2-CPHBA) rare-earth chelates, were determined by a potentiometric method. The variation of the overall stability constants, “log β” with atomic number, of the lanthanide was ascribed to different degrees of dehydration of the cations. The 2-CPHBA ligand exhibited less affinity for rare earth cations than 2-CPHAAA. The correlation of “log β” versus the basicity of the ligands showed that 2-CPHAAA and 2-CPHBA form the same type of chelate in polar solvents but differ in non polar solvents.     

Untersuchungen zur Ermittlung der Tiefenverteilung der primären Ionisationen in dicken Zwei-Element-Targets bei Beschuß mit Elektronen aus dem Energiebereich unterhalb 30 keV. Teil 1

Es werden methodische Untersuchungen zur Entwicklung eines Monte-Carlo-Programmes zur Berechnung der Tiefen-verteilung der primären Ionisationen auf der Grundlage der Vielfachstreutheorie von Molière beschrieben. Anhand aus-gewählter Zwei-Element-Targets wird die Leistungsfähigkeit von drei Varianten eines entsprechenden Elektronentrans-portmodells untersucht. Unter Benutzung der entwickelten Elektronentransportmodelle werden für die Elektronenstrahl-mikroanalyse interessierende Größen, wie Rückstreukoeffizient, Rückstreufaktor und Absorptionskorrektion, berechnet.     

Thiourea Derivatives,Simple in Structure but Efficient Enzyme Inhibitors and Mercury Sensors

In this study six unsymmetrical thiourea derivatives, 1-isobutyl-3-cyclohexylthiourea (1), 1-tert-butyl-3-cyclohexylthiourea (2), 1-(3-chlorophenyl)-3-cyclohexylthiourea (3), 1-(1,1-dibutyl)-3-phenylthiourea (4), 1-(2-chlorophenyl)-3-phenylthiourea (5) and 1-(4-chlorophenyl)-3-phenylthiourea (6) were obtained in the laboratory under aerobic conditions. Compounds 3 and 4 are crystalline and their structure was determined for their single crystal. Compounds 3 is monoclinic system with space group P2₁/n while compound 4 is trigonal, space group R³:H. Compounds (1–6) were tested for their anti-cholinesterase activity against acetylcholinesterase and butyrylcholinesterase (hereafter abbreviated as, AChE and BChE, respectively). Potentials (all compounds) as sensing probes for determination of deadly toxic metal (mercury) using spectrofluorimetric technique were also investigated. Compound 3 exhibited better enzyme inhibition IC₅₀ values of 50, and 60 µg/mL against AChE and BChE with docking score of −10.01, and −8.04 kJ/mol, respectively. The compound also showed moderate sensitivity during fluorescence studies.     

Synthesis and characterization studies of 3-formyl chromone Schiff base complexes and their application as antitumor,antioxidant and antimicrobial

A novel Schiff base namely (E)-3-((2,6-dihydroxypyrimidin-4-ylimino)methyl)-4H-chromen-4-one and its Co (II), N (II)i, Cu (II) and Cd (II) complexes have been synthesized and proved by elemental analysis, molar conductance, thermal analysis (TGA), Inductive Coupled plasma (ICP), magnetic moment measurements, X-ray powder diffraction, IR, EI-mass,¹H NMR, ¹³C NMR,UV–Vis. and ESR spectral studies. On the basis of these data, it is evident that the Schiff base acts as bidentate via oxygen atom of carbonyl group and azomethine nitrogen atom for Co (II) complex; monobasic bidentate ligand for Ni (II), Cu (II) and Cd (II) complexes via oxygen atom of hydroxyl group and nitrogen atom of pyrimidine ring. The results showed all complexes have octahedral geometry. The average particle size of the ligand and its complexes were found to be 1.010–0.343 nm. The pharmacological action (antioxidant, antimicrobial and anticancer) of the prepared compounds is studied. The antitumor activity of the ligand and its metal complexes is evaluated against human liver carcinoma (HEPG2) cell. The data displayed the Co (II) complexes strong cytotoxicity where IC₅₀ values of Co (II) complex and 5-fluorouracil (stander drug) are 9.33 and 7.86 μg/ml respectively. The Co (II) and Cd (II) complexes have antibacterial activity more than ampicillin (stander drug). The interaction of the synthesized compounds with calf-thymus DNA (CT-DNA) has been performed via absorption spectra and viscosity technique. The DNA- binding constants have been determined.     

Spectral and thermal studies of 4-(1H-pyrazolo (3,4-d) pyrimidin-4-ylazo) benzene-1,3-diol complexes of cobalt(II), nickel(II) and copper(II)

4-(1H-Pyrazolo (3,4-d) pyrimidin-4-ylazo) benzene-1,3-diol was synthesized and characterized by various spectral and analytical techniques. Semiempirical quantum calculations using the AM1 method have been performed in order to evaluate the geometry and electronic structure of the title azodye in the ground state. The complex formation between Co(II), Ni(II) and Cu(II) ions and the title azodye was studied conductometrically and spectrophotometrically. The spectrophotometric determination of the title metal ions and titration using EDTA are reported. Co(II), Ni(II) and Cu(II) complexes of the title azodye have been synthesized and characterized by elemental analysis, conductivity, magnetic susceptibility, IR, UV-Vis and thermal analysis (TGA and DTA).The spectral and magnetic data suggested the octahedral geometry for Co(II) and Ni(II) complexes while Cu(II) complexes have square planar geometry. The thermal studies confirmed the chemical formulations of the title complexes. The thermal degradation takes place in two or three steps depending on the type of the metal and the geometry of the complexes. The kinetics of the decomposition was examined by using Coats-Redfern relation. The activation energies and other activation parameters (DeltaH, DeltaS and DeltaG) were computed and related to the bonding and stereochemistry of the complexes.     

Surface acidity and basicity of functionalized silica particles

Tetraethoxysilane has been co-hydrolyzed with functionalized organosilanes in a modified Stöber process to produce silica particles with amino, carboxylate or dihydroimidazole groups on the surface. The effects of reaction conditions and the loading of the functionalized organosilane on particle size was examined by TEM. Fluorescence spectroscopy of the surface amino groups covalently modified with fluorescamine, and the surface carboxylate groups with 4-bromomethyl-6,7-dimethoxycoumarin, demonstrated that these functional groups were accessible for further reaction. Changes in surface acidity and basicity caused by the presence of functional groups (amine, dihydroimidazole, carboxylate) on the particle surface were determined using an indicator titration technique. Particles with surface imidazole and amine groups and particles with surface carboxylate groups have enhanced basicity and acidity, respectively. Dihydroimidazole-modified silica had greater surface basicity than the amine-modified silica. The effect on basicity and acidity increases as the amount of added functionalized silane increases. However, this increase is nonlinear with respect to the increase in added functionalized silane. Particles with both surface dihydroimidazole and carboxylate groups demonstrated reduced surface basicity and acidity.     

Thiophenylhydrazonoacetates in heterocyclic synthesis

Benzo[b]thiophen-2-yl-hydrazonoesters 4 were synthesized by coupling of 2-diazo-4,5,6,7-tetrahydrobenzo[b]thiophene-3-carboxamide ( 1 ) with either ethyl cyanoacetate or ethyl acetoacetate. The reactivity of 4 toward a variety of nitrogen nucleophiles was investigated to yield pyrazole, isoxazole, pyrimidine, triazine, pyrazolopyridine, and pyrazolopyrimidine derivatives. © 2003 Wiley Periodicals, Inc. 15:15–20, 2004; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/.hc10205     

Enrichment of Zinc and Iron Micronutrients in Lentil (Lens culinaris Medik.) through Biofortification

Biofortification of pulse crops with Zn and Fe is a viable approach to combat their widespread deficiencies in humans. Lentil (Lens culinaris Medik.) is a widely consumed edible crop possessing a high level of Zn and Fe micronutrients. Thus, the present study was conducted to examine the influence of foliar application of Zn and Fe on productivity, concentration, uptake and the economics of lentil cultivation (LL 931). For this, different treatment combinations of ZnSO₄·7H₂O (0.5%) and FeSO₄·7H₂O (0.5%), along with the recommended dose of fertilizer (RDF), were applied to the lentil. The results of study reported that the combined foliar application of ZnSO₄·7H₂O (0.5%) + FeSO₄·7H₂O (0.5%) at pre-flowering (S1) and pod formation (S2) stages was most effective in enhancing grain and straw yield, Zn and Fe concentration, and uptake. However, the outcome of this treatment was statistically on par with the results obtained under the treatment ZnSO₄·7H₂O (0.5%) + FeSO₄·7H₂O (0.5%) at S1 stage. A single spray of ZnSO₄·7H₂O (0.5%) + FeSO₄·7H₂O (0.5%) at S1 stage enhanced the grain and straw yield up to 39.6% and 51.8%, respectively. Similarly, Zn and Fe concentrations showed enhancement in grain (10.9% and 20.4%, respectively) and straw (27.5% and 27.6% respectively) of the lentil. The increase in Zn and Fe uptake by grain was 54.8% and 68.0%, respectively, whereas uptake by straw was 93.6% and 93.7%, respectively. Also the benefit:cost was the highest (1.96) with application of ZnSO₄·7H₂O (0.5%) + FeSO₄·7H₂O (0.5%) at S1 stage. Conclusively, the combined use of ZnSO₄·7H₂O (0.5%) + FeSO₄·7H₂O (0.5%) at S1 stage can contribute significantly towards yield, Zn and Fe concentration, as well as uptake and the economic returns of lentil to remediate the Zn and Fe deficiency.     

Reaction with hydrazonoyl halides XXIII [1]: Synthesis and reactions of C‐coumarinoyl‐N‐arylformohydrazonoyl bromides

C‐Coumarinoyl‐N‐arylformohydrazonoyl bromides ( 3 ) were synthesized by reaction of N‐nitrosoarylacetamides with an appropriate sulfonium bromide in ethanol at room temperature. The reactions of potassium thiocyanate, potassium selenocyanate, thiourea, methyl phenylthiocarbomate, and methyl phenylhydrazinedithioate with hydrazonoyl bromide 3a were examined. © 1999 John Wiley & Sons, Inc. Heteroatom Chem 10: 355–362, 1999