Continuous automatic determination of ammonia by using an integrated separation/detection unit

An automatic continuous-flow photometric method for the determination of ammonia is proposed. It is based on the Berthelot reaction, the product of which is temporarily immobilized on a suitable support (Sephadex QAE) located in the flow-cell. The retained product is eluted after measurement by a cationic surfactant contained in the carrier solution. The method allows the determination of the analyte between 0.4 and 20.0 gmg/ml, with an RSD of 0.8%, at a sampling frequency of 13/hr. The determination limit can be reduced by a factor of ten by using a flow-cell with a two-fold longer path length, but the sampling frequency is also reduced as a result. The method was applied to the determination of this analyte in agricultural samples (plants and soils) and compared with standard methods for these types of samples.     

Thermal analysis of anhydrous and hydrated Cholesterol

Cholesterol constitutes the major component of most gallstones. It was identified and determined, in gallstones, issued from eleven patients, by thermal analysis: differential scanning calorimetry (DSC), with the use of the melting temperature and enthalpy, thermogravimetry (TG), with the mass loss of water. Anhydrous cholesterol (ChA) was characterized by two endothermic peaks (polymorphic, melting) and cholesterol monohydrate (ChH) by two endothermic peaks (dehydration, melting), too. Cha needle and Chh plate crystals were observed under polarizing light microscopy. The numerous stones obtained from nine patients were cholesterol stones: the ChA was higher 45 and lower 96%. ChH was present in stones of three patients. This revised version was published online in July 2006 with corrections to the Cover Date.     

Quasi-intramolecular acid–base reactions in aqueous solutions of metal-complexes of basic ligands I. Generalized theoretical considerations on the deammoniation of [ML m ]X n type ammonia complexes

The theoretical investigation on the distribution of chemical species obtainable as a function of the temperature of the aqueous solutions of metal complexes containing a basic ligand, altogether with the solubility relationship of the compounds to be formed, offers a simple means of planning the preparation of various types of complexes, double and single salts of the central metal cation and onium type compounds of protonated ligand of the central ion and the anion.     

Photophysical properties of borondipyrromethene analogues in solution

The photophysical properties of seven new 8-(p-substituted)phenyl analogues of 4,4-difluoro-3,5-dimethyl-8-(aryl)-4-bora-3a,4a-diaza-s-indacene (derivatives of the well-known fluorophore BODIPY) in several solvents have been studied by means of absorption and steady-state and time-resolved fluorimetry. For each compound, the fluorescence quantum yield and lifetime are lower in solvents with higher polarity owing to an increase in the rate of nonradiative deactivation. Increasing the electron withdrawing strength of the p-substituent on the phenyl group in position 8 also leads to lower fluorescence quantum yields and lifetimes. When the p-substituent on the phenyl group in position 8 is a tertiary amine [8-(4-piperidinophenyl), 8-(4-N,N-dimethylaminophenyl), and 8-(4-morpholinophenyl)], the low quantum yields of these compounds in more polar solvents can be rationalized by the inversion of the energy levels of an apolar, highly fluorescent and a polar, nonfluorescent excited state, where charge transfer from the tertiary amine to the BODIPY unit occurs. These amine analogues can be protonated at low pH in aqueous solution. Fluorescence titrations yielded pK(a) values of their conjugate ammonium salts which are in agreement with the electron donating tendency of the amine group: piperidino (4.15) > dimethylamino (2.37) > morpholino (1.47), with the pK(a) values in parentheses. The rate constant of radiative deactivation (k(f)) is the same for all compounds in all solvents studied (k(f) = 1.4 x 10(8) s(-1)).     

Attenuated Total Reflection-Fourier transform infrared analysis of the fermentation process of pineapple

A direct and reagent free procedure has been developed to monitor the fermentation process of pine apple nectar using Attenuated Total Reflectance Fourier-transform mid-infrared spectrometry (FT-IR) and multivariate analysis. A classical 4² design for standards was employed for calibration using the information in the spectral range from 907 to 1531 cm⁻¹ of the first order derivative spectra after mean centering of infrared data. The root mean square error of calibration (RMSEC) of 0.040, 0.021, 0.063 and 0.074% w/w were obtained for glucose, fructose, saccharose and ethanol, respectively, and a mean relative validation error of 2.9, 2.1, 2.6 and 3.6% was achieved for glucose, fructose, saccharose and ethanol. Results obtained by the proposed procedure for the alcohol content at different fermentation levels were statistically comparable with those obtained by a reference spectrometric method. So, FT-IR spectrometry provides a fast alternative to long and tedious classical procedures to ethanol determination and sugar enzymatic analysis.     

Evaluation of a purge-and-trap injection system for capillary gas chromatography-microwave induced plasma-atomic emission spectrometry for the determination of volatile selenium compounds in water

A method is presented for the selective determination of the volatile selenium species dimethylselenide and dimethyldiselenide, using a commercially available purge-and-trap injection system coupled to capillary gas chromatography-microwave induced plasma-atomic emission spectrometry. The efficiency of the purging step was evaluated and the parameters affecting the purge and trap processes were optimized. The method was applied to the determination of volatile selenium compounds in lake water. Relative detection limits of 2ng/l for dimethylselenide and dimethyldiselenide, corresponding to an absolute detection limit of 10 pg, were achieved.     

Graphs whose every transitive orientation contains almost every relation

Given a graphG onn vertices and a total ordering ≺ ofV(G), the transitive orientation ofG associated with ≺, denotedP(G; ≺), is the partial order onV(G) defined by settingx<y inP(G; ≺) if there is a pathx=x ₁ x ₂…x _r=y inG such thatx ₁ ≺x _j for 1≦i<j≦r. We investigate graphsG such that every transitive orientation ofG contains ₂ ⁿ −o(n ²) relations. We prove that almost everyG _n,p satisfies this requirement if , but almost noG _n,p satisfies the condition if (pn log log logn)/(logn log logn) is bounded. We also show that every graphG withn vertices and at mostcn logn edges has some transitive orientation with fewer than ₂ ⁿ −δ(c)n ² relations. Partially supported by MCS Grant 8104854.     

Two-photon absorption and energy band structure of orthorhombic Hg2Cl2 crystals

Dependence of two-photon absorption (TPA) rate on the state of polarization of a laser beam is investigated in the low-temperature orthorhombic modification of Hg₂Cl₂ crystals. Theoretical calculations of the dependence of TPA rate on the direction of polarization vector of the beam are performed for centrosymmetric points, Y, Z, T, R andS of the Brillouin zone. The domain structure of real crystals is taken into consideration and it is shown that periodicity of the polarization dependence may indicate whether TPA is due to transitions either at, Y, Z, T orR, S points. The polarization dependence of TPA cannot, however, distinguish between points inside these two groups. Comparison of theory with a low-temperature (T 8·5 K) experimental curve of polarization dependence is discussed. It is shown that the experiment can be explained in main features by a model of noninteracting oriented linear dipoles. Further, on the basis of TPA measurements, a simple energy band structure of Hg₂Cl₂ is proposed regarding Hg₂Cl₂ crystal as a linear chain of molecules.The authors express thanks to Dr. . Barta for supplying the Hg₂Cl₂ crystals, Dr. Z. Bryknar for critical comments and Dr. B. Velický for stimulating discussion. We thank also Dr. V. Kohlová for assistance during measurement.     

Kinetic studies of some substituted hexarhodium carbonyl clusters

Reactions of the halides X- (X- = chloride, bromide or iodide) with the substituted cluster Rh6(CO)15(PPh3) in oxygen-free chloroform lead to [Rh5(CO)14(PPh3)]-, Rh(CO)2(PPh3)2X and [Rh(CO)2X2]- in the molar ratios 2:1: approximately 13. Oxidation by the solvent is assumed to lead to most of the Rh(I) product, and the stoichiometry for reactions with I- can be defined as 4Rh6(CO)15(PPh3) + 27I- + 12CHCl3 --> 2[Rh5(CO)14(PPh3)]- + Rh(CO)2(PPh3)2I + 13[Rh(CO)2I2]- + 6C2H2Cl4 + 4CO + 12Cl-. This can be rationalized quite simply with the aid of a few generally justifiable assumptions. Rate constants for reactions with bromide increase to a limiting value with increasing [Br-] in a way that shows that breaking of one Rh-Rh bond, with an unusual closo to nido structural change, is rate determining. This opening of the cluster might be spontaneous or solvent induced. To complete the reaction, the bromide has to compete with the reverse nido to closo change. The same closo to nido change is also a major rate determining step for reactions with P(OPh)3 in oxygen-free solutions, and for reactions with bromide in oxygenated solutions in the presence of trifluoroacetic and some other acids. The limiting rates increase slightly with increasing basicity of the ligands P(p-XC6H4)3 along the series X = F3C, Cl, F, H and MeO. Activation parameters for these reactions are reported.