哌嗪取代卟啉的合成、表征及其抗癌活性

设计并合成了6个具有抗癌活性的哌嗪取代卟啉化合物,分别为5,10,15,20-四[4-(4'-乙基哌嗪基)苯基]卟啉(TEPPH2,8a),5,10,15,20-四[4-(4'-丁基哌嗪基)苯基]卟啉(TBPPH2,8b),5,10,15,20-四[4-(4'-庚基哌嗪基)苯基]卟啉(THPPH2,8c),5,10,15,20-四[4-(4'-苯基哌嗪基)苯基]卟啉(TPhPPH2,8d),5-[4-(4'-乙基哌嗪基)苯基]-10,15,20-三苯基卟啉(EPTPPH2,8e)和5-[4-(4'-丁基哌嗪基)苯基]-10,15,20-三苯基卟啉(BPTPPH2,8f).这些卟啉化合物都由取代苯甲醛与吡咯缩合而成,每一个卟啉分子中含有一个或四个具有抗癌活性的取代哌嗪结构,结构经元素分析,MS,1H NMR,IR和UV-vis等表征.初步的生物活性研究表明,这些化合物具有一定的抗癌活性,因而在医学上可能具有潜在应用前景.     

[Co(amp)2Cl2]2[ZnCl4]体系中两对称异构体的2D NMR研究

The two symmetrical isomers in [Co(amp)₂Cl₂]₂[ZnCl₄](amp=2-(Aminomethyl)pyridine) system were syn-thesized by general oxidation method and were separated by chromatography and recrystallization method. Their configurations were assigned by using 2D NMR techniques, particularly the NOESY NMR spectra. Solvent used was Me₂SO-d₆ with the central peak of the CD₃ septet as the reference ( ₁₃C,δ 39.37; ₁H,δ 2.49 relative to SiMe₄). Cation exchange media used was Dowex 50Wx 2(H⁺ form, 200～400mesh; Biorad).     

SYNTHESIS, CROSSLINKING MECHANISM AND PROPERTIES OF A POLYACRYLATE/POLYURETHANE COMPOSITE COATING

A polyacrylate/polyurethane (P(A) / P(U)) composite coating has been prepared bycrosslinking an acetoacetylated polyacrylate with a vinylic group terminated polyurethaneat room temperature. A model Michael reaction between ethyl acetoacetate (EAA) andmethyl acrylate (MA) was designed to study the crosslinking mechanism. It was foundthat the two active hydrogen atoms in acetoacetyl group can both add to vinylic groupsand the yield of mono- and bis-adducts are much affected by the molar ratio of acetoacetylto vinylic groups. Higher crosslinking degree and better properties could be obtained withdecreasing the molar ratio of the two active groups from 1/1 to 0.6/1 in the compositecoatings.     

丙烯酸甲酯-氰尿酸三烯丙酯共聚物的合成及其孔结构的研究Ⅰ.

氰尿酸三烯丙酯(TAC)与丙烯酸甲酯(MA)在致孔剂如环己烷、正丁醚或甲苯-汽油(200~#)存在下,用悬浮聚合得到一系列大孔共聚物。对这些共聚物孔结构的研究表明,它们的平均孔径达10000—80000(?),同时研完了致孔剂的分子结构和用量对共聚物孔结构的影响,并初步讨论特大孔共聚物形成的机理。     

过硫酸盐和N,N,N′,N′-四甲基乙二胺体系引发烯类聚合机理的研究

<正> 过硫酸盐和N,N,N′,N′-四甲基乙二胺(TMEDA)体系用作烯类聚合的引发剂已有报道。本文报道该引发体系的反应机理。1.实验方法     

THE SEPARATION,PURIFICATION AND DECOLORIZATION OF NEW ANTIBIOTICS-MILUPEINAN USING ADSORPTION RESIN

1. INTRODUCTION Fig.1 The Chemical Structure of Milupeinan As a new type of antibiotics Milupeinan, not only possesses antibacterial activities against a wide range of Gram-positive and Gram-negative bacteria, but also higgh stability under th…     

无机胺合成ZSM-5沸石的结构表征和催化作用

分别以氨水和正丙胺为模板剂 ,在 177℃温度下静止晶化 5 0小时 ,合成出ZSM - 5沸石分子筛 .经XRD和IR测试 ,两者具有基本相同的结构 ;TG -DSC分析证明 ,两者都具有优良的热稳定性 .由于有机胺易氧化分解 ,故使得后者的腔内包含物氧化放热峰前移约 4 0℃ .合成的ZSM - 5沸石经用不同离子交换后 ,用于催化己烷芳构化反应     

新型(E)-1-取代苯基-3-(3''''-取代吲哚基)-2-丙烯酮类化合物的合成和抗炎活性研究

设计合成了一系列新的席合物3a～3p, 其结构经 1H NMR, IR, LC/MS确证. 用化合物对小鼠耳部巴豆油炎症影响的炎症模型测定化合物3a～3i的生物活性, 结果表明, 化合物3d, 3f, 3g可明显抑制巴豆油致小鼠耳部炎症. 其抑制率分别为19.5%, 27.6%, 16.1%.     

PSt-b-PEO增容PA6/PS共混体系的研究

采用动态力学方法（ＤＭＡ），形态学方法（ＳＥＭ），研究了ＰＳｔ ｂ ＰＥＯ存在下尼龙６（ＰＡ６）／聚苯乙烯（ＰＳ）共混体系的相容性．研究表明，ＰＡ６和ＰＳ的简单共混体系，分散相相畴尺寸大，相界面清晰，断裂面光滑，呈脆性断裂，相容性极差，属不相容体系．而加入少量ＰＳｔ ｂ ＰＥＯ后分散相尺寸变小，界面层变厚，界面粘结力增强，表现出韧性特征．     

1,2,4-三苯基环戊二烯的合成及其烷基化反应

测定了颇哪醇在酸性条件下所得的脱水产物的分子结构.结果表明,在酸性条件下颇哪醇的脱水反应优于重排反应,由此合成了1,2,4-三苯基环戊二烯.该环戊二烯衍生物的烷基化反应,在通常条件下优先发生在碳环的第5位碳原子上,但在苛刻的剧烈反应条件下,进而发生在碳环的第3位碳原子上.讨论了脱水反应和烷基化反应的机理.