Nature of Bonding in Bowl‐Like B36 Cluster Revisited: Concentric (6π+18π) Double Aromaticity and Reason for the Preference of a Hexagonal Hole in a Central Location

The bowl‐shaped C_6v B₃₆ cluster with a central hexagon hole is considered an ideal molecular model for low‐dimensional boron‐based nanosystems. Owing to the electron deficiency of boron, chemical bonding in the B₃₆ cluster is intriguing, complicated, and has remained elusive despite a couple of papers in the literature. Herein, a bonding analysis is given through canonical molecular orbitals (CMOs) and adaptive natural density partitioning (AdNDP), further aided by natural bond orbital (NBO) analysis and orbital composition calculations. The concerted computational data establish the idea of concentric double π aromaticity for the B₃₆ cluster, with inner 6π and outer 18π electron counting, which both conform to the (4n+2) Hückel rule. The updated bonding picture differs from existing knowledge of the system. A refined bonding model is also proposed for coronene, of which the B₃₆ cluster is an inorganic analogue. It is further shown that concentric double π aromaticity in the B₃₆ cluster is retained and spatially fixed, irrespective of the migration of the hexagonal hole; the latter process changes the system energetically. The hexagonal hole is a destabilizing factor for σ/π CMOs. The central hexagon hole affects substantially fewer CMOs, thus making the bowl‐shaped C_6v B₃₆ cluster the global minimum.     

石墨烯/铂纳米粒子杂化膜测定肾上腺素

利用循环伏安法制备了石墨烯/铂纳米粒子杂化膜修饰电极,并利用该修饰电极研究了肾上腺素（EP）的电化学行为,建立了测定肾上腺素的电化学方法。 分别利用扫描电子显微镜（SEM）和循环伏安法对电极表面的形貌和电化学性能进行了表征。 试验优化了修饰电极制备过程中影响电极性能的条件和EP的测定条件。 试验结果表明,石墨烯/铂纳米粒子修饰电极对肾上腺素有明显的电催化作用。 在pH=5.0的柠檬酸 磷酸氢二钠缓冲溶液中,EP的氧化峰电流与其浓度在4.4×10-8~2.2×10-6 mol/L的范围内呈良好的线性关系。 线性方程为ipa(10 μA)=0.0753c(mol/L)+3.7653×10-5,r=0.9989,检出限为2.2×10-9 mol/L（S/N=3）。 修饰电极表具有良好的重现性,可用于实际样品的测定。     

高效液相色谱法测定润肤霜和洗发露中的银杏黄酮类物质

建立了测定润肤霜和洗发露中3种银杏黄酮类物质(槲皮素、山萘素和异鼠李素)的高效液相色谱分析方法。样品经甲醇提取、离心后,提取液以Fortis Phenyl色谱柱(4.6×250 mm,5μm)分离,体积分数0.5%H3PO4-甲醇流动相体系等度洗脱,在波长367 nm下用二极管阵列检测器检测,以保留时间结合紫外光谱定性,外标法定量。结果表明:3种目标分析物分离度好;在0.25~50.0 mg/L范围内线性关系良好,相关系数为0.9992~0.999 9;槲皮素、山萘素和异鼠李素的方法检出限(S/N=3)分别为0.8,1.0和1.0 mg/kg;添加水平为5~500 mg/kg时,回收率为83.5%~102.8%,相对标准偏差(RSD,n=6)为1.6%~6.5%。方法适用于护肤类和洗护发类化妆品中槲皮素、山萘素和异鼠李素的测定。     

三维荧光法测定水中的4-氯苯酚

对三维荧光法测定水中的4-氯苯酚进行了研究,并与传统的比色法进行了比较。4-氯苯酚的三维荧光光谱图中荧光特征峰位于λex/λem=280 nm/310 nm处,在pH 1~8时,荧光较强且稳定。4-氯苯酚质量浓度为0.01~2.0 mg/L时,荧光强度与浓度的线性相关系数R2为0.9997,检出限为0.0096 mg/L。方法可用于自来水及地表水中的4-氯苯酚的测定,回收率在94.3%~106.0%。     

含肽键芳酰腙镧(Ⅲ)配合物的合成、表征及对四种作物病害的抑制作用

合成了未见文献报道的镧(Ⅲ)与含肽键芳酰腙配体(2-羰基丙酸水杨酰腙)的配合物,经化学分析、元素分析及摩尔电导率等表征推测其组成为:La(H2L)(HL)·H2O(H3L为2-羰基丙酸水杨酰腙C10H10N2O4)。通过红外、紫外及荧光的研究表明配体以羧基氧、羰基氧和亚氨基氮与La3+三齿配位,形成了两个共边五元环的稳定结构。盆栽活体试验表明该配合物对四种作物病害都有不同程度的抑制作用,其中对小麦条锈病的防治效果最好,防治效果达80.8%。     

A New Porous Cadmium(Ⅱ) Complex Based on 1,10-Phenanthroline Derivative and Dicarboxylate:Syntheses,Structure, Thermal Behavior and Luminescence

A new porous Cd(Ⅱ) coordination compound, namely, [Cd(bpdc)(L)2]·3H2O(1, L = 11-fluoro-dipyrido[3,2-a:2,3-c]phenazine and bpdc = 1,1-biphenyl-2,2-dicarboxylate) was synthesized under hydrothermal conditions, and characterized by single-crystal X-ray diffraction. It crystallizes in tetragonal, space group P4122 with a = 9.8486(4), b = 9.8486(4), c = 45.925(4)A, V = 4454.5(5) 3, Z = 4, C50H29 Cd F2N8O7, Mr = 1004.21, Dc = 1.497 g/cm3, F(000) = 2028, μ(Mo Ka) = 0.562 mm-1, R = 0.0566 and w R = 0.1585. Each Cd(Ⅱ) atom is coordinated by one bpdc anion and two L ligands to give a discrete molecule. Neighboring discrete molecules are stacked by π-π interactions among L ligands, resulting in an interesting 1D supramolecular chain. Moreover, the 1D supramolecular chains are packed with each other to give a porous structure, in which an infinite channel is filled with water molecules. In addition, the thermal behavior and luminescent property of 1 have also been studied.     

磁场辅助静电纺有序聚丙烯腈纳米纤维的研究

磁场辅助静电纺丝方法能够制备有序纳米纤维,但是其参数之间的匹配关系很少被研究。本文通过正交实验,对影响磁场辅助静电纺丝制备聚丙烯腈纳米纤维的四个工艺参数(溶液浓度、磁铁间距、纺丝电压和注射速度)在3个水平上进行优化筛选。以纤维直径大小、均匀度和纤维有序度为考察目标,同时考虑溶液浓度、磁铁间距与纺丝电压这三个因素之间的两两交互作用,结合极差分析、方差分析,发现溶液浓度是影响纤维直径和均匀度的高度显著因素,溶液浓度和纺丝电压的交互作用对直径均匀度有显著影响,纺丝电压是影响纤维有序度的显著因素。     

流动注射-分光光度法测定药物中克林霉素磷酸酯的含量

试验表明:在pH 3.8的乙酸盐缓冲介质中,克林霉素磷酸酯(CLP)能将铁(Ⅲ)还原为铁(Ⅱ),而所生成的铁(Ⅱ)与邻菲啰啉反应生成有色络合物(λmax=508nm),且生成的铁(Ⅱ)量与CLP之间存在定量关系,经换算所测得吸光度与CLP的质量浓度在0.70~140mg·L-1之间呈线性关系。据此并结合流动注射技术(FI)提出了FI-分光光度法间接测定药物中CLP的新方法优化的分析条件如下:①乙酸盐缓冲溶液的加入量:2.5mL;②铁(Ⅲ)溶液质量浓度:10.0mg·L-1;③邻菲啰啉溶液浓度:1.5×10-3 mol·L-1;④反应温度:85℃。该方法的检出限为0.060mg·L-1。应用此方法测定了药物中CLP的含量,测定值与国家药品标准方法的测定值相符。     

Total synthesis of (±)-antofine

An efficient preparation of (±)-antofine is described. The main steps involved in this synthesis are the Horner–Wadsworth–Emmons reaction, the intramolecular Schmidt reaction of an azido aldehyde, and the one-pot deprotection of the N-formyl group, followed by Pictet–Spengler cyclization. The asymmetric hydrogenation of the trisubstituted α,β-unsaturated ester is also explored, however only moderate enantio-control (55% ee) is obtained. Finally, (±)-antofine is prepared in six steps from the phenanthryl aldehyde 5 with an overall yield of 35%.     

Synthesis,Characterizations, Magnetism and Thermal Degradation of a 2‐Fold Interpenetrated 3D Cobalt‐Organic Framework

A new coordination polymer, [Co₂(L)₂(4,4′‐bipy)]_n·3nH₂O ( 1 ) based on 5‐(3‐methyl‐5‐phenyl‐4H‐1,2,4‐triazol‐4‐yl)isophthalic acid (H₂ L ) and 4,4′‐bipyridine (4,4′‐bipy) has been hydrothermally synthesized and characterized by single‐crystal X‐ray diffraction, XRPD, IR, and elemental analysis. Temperature‐dependent magnetic susceptibility and thermal degradation for 1 were also studied. The asymmetric unit of compound 1 consists of two crystallographically independent Co(II) ion, two L ^2? ligand, one 4,4′‐bipy ligand, and three lattice water molecules. The 2D triangle networks were linked by the bridging 4,4′‐bipy ligand to give rise to a 2‐fold interpenetrated 3D architecture. The simplest cyclic motif of the 2D networks is a triangle ring consisting of three Co(II) cations and three L ^2? ligands. So we can define Co(II) ions as 4‐connected nodes and the L ^2? ligands as 3‐connected nodes. Thus, the 3D structure can be described as a 2‐fold parallel interpenetrated ins InS 3,4‐conn topology.