Measurement of small-signal and large-signal responses of packaged laser modules at high temperature

In this paper, the pulsed injection method is extended to measure the chip temperature of various packaged laser modules, such as the DFB laser modules, the FP laser modules, and the EML laser modules. An optimal injection condition is obtained by investigating the dependence of the lasing wavelength on the width and period of the injection pulse in a relatively wide temperature range. The small-signal frequency responses and large-signal performances of packaged laser modules at different chip temperature are measured. The adiabatic small-signal modulation characteristics of packaged LD are first extracted. In the large-signal measurement, the effects of chip temperature, bias current and driving signal on the performances of the laser modules are discussed. It has been found that the large-signal performances of the EML modules depend on the different red-shift speeds of the DFB and EAM sections as chip temperature varying, and the optimal characteristics may be achieved at higher temperature.     

Synthesis of TiO2–SiO2/polymer core–shell microspheres with a microphase‐inversion method

A novel microphase‐inversion method was proposed for the preparation of TiO₂–SiO₂/poly(methyl methacrylate) core–shell nanocomposite particles. The inorganic–polymer nanocomposites were first synthesized via a free‐radical copolymerization in a tetrahydrofuran solution, and the poor solvent was added slowly to induce the microphase separation of the nanocomposite and result in the formation of nanoparticles. The average particle sizes of the microspheres ranged from 70 to 1000 nm, depending on the reaction conditions. Transmission electron microscopy and scanning electron microscopy indicated a core–shell morphology for the obtained microspheres. Thermogravimetric analysis and X‐ray photoelectron spectroscopy measurements confirmed that the surface of the nanocomposite microspheres was polymer‐rich, and this was consistent with the core–shell morphology. The influence of the synthetic conditions, such as the inorganic composition and the content of the crosslinking monomer, on the particle properties was studied in detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3911–3920, 2006     

Effect of glass bead packing on the fibrillation of liquid‐crystalline polymer in polycarbonate

Polycarbonate (PC) was melt blended with small amount of liquid‐crystalline polymer (LCP) and various contents of glass beads (GB) having different diameters. The rheological measurements indicated that the GB addition increased the viscosity ratio and seemed unfavorable to the LCP fibrillation. However, the morphological observation showed that the LCP fibrillation was promoted by the GB addition and varied with the GB packing. With the increased GB packing by increasing the GB content and/or decreasing the GB diameter, LCP deformed from spheres and ellipsoids into stretched ellipsoids at lower shear rates and into long fibrils at higher shear rates. Although higher content of smaller GB jammed into the larger LCP droplets and inhibited the LCP fibrillation, very long LCP fibrils formed at higher shear rates at a high enough packing of GB. The relationship between GB packing and LCP fibrillation revealed two kinds of hydrodynamic effects of GB promoting the LCP fibrillation: at lower GB packing, the shear flow was enhanced by the high local shear between GB, in quantity; and for a high enough GB packing, the shear flow was changed, in quality, into elongational flow, which was more effective for the LCP fibrillation. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1020–1030, 2006     

模糊神经网络在复合地基沉降量预测中的应用

复合地基后期沉降变形对于建筑物设计及安全具有重要意义,针对通过长期沉降观测以得到复合地基的最终沉降需要耗费较多资源的问题,提出了一种基于模糊神经网络的预测方法.该方法考虑沉降变化过程有较大的随机性和模糊性,直接将样本数据进行模糊化,所得的模糊数代表了样本点集与控制点集中各分量之间的相关度,并依此建立模糊BP神经网络进行学习和估算.实验结果表明了该方法对沉降进行预测是可行与有效的,且在相对误差的有效控制方面优于BP网络方法与灰色方法.     

仲态电子偶素湮没辐射能量的改进测量

用充氧气的气凝硅胶作仲态电子偶素源,用¹⁹²Ir精密γ能量作标准,以时间选择能谱仪和滑动比较法改进测量仲态电子偶素2γ湮没能量,得到hv=510995.34±0.69eV.经电子偶素结合能修正,得正、负电子对静止质量,与电子质量比较,表明正、负电子质量在1.4ppm内一致.     

Pointwise Stabilization for a Chain of Coupled Vibrating Strings

For the system representing a chain of coupled vibrating strings,we show that the associated semigroup satisfies the assumptionof spectrum-determined growth, and hence obtain conditions forenergy to decay strongly or exponentially. We examine in detailthe three-string case, and our results include those obtainedby others for the two-string case. Permanent address: Beijing Institute of Information and Control,Beijing, China.     

Interaction of gravitational waves with a superconducting cylindrical antenna

In this paper we investigate the effects of gravitational waves (GW) on a superconducting cylindrical antenna (S-antenna). We suggest that the electric fields induced by GW of dimensionless amplitudeh - 10^–24 in the interior of existing cylindrical antenna might be detectable.     

后处理温度对ZrO2气凝胶超细粉织构和结构的影响

运用神效儿宝治疗小儿厌食症２１０例，总有效率为９５．２％，显效率为６２．４％。该药使用、携带方便、见效快，疗效短，无毒副作用。实验证明，该药能显著提高胃蛋白酶含量，减慢肠管推进性运动，提高动物耐疲劳、耐缺氧能力，提高巨噬细胞吞噬率及血清补Ｃ３含量，且无毒副。作用     

不同沉淀剂制备的Ag／TS－1催化丙烯直接气相氧化合成环氧丙烷

 在423K、常压固定床石英反应器中，以丙烯直接气相氧化为探针反应，考察了催化剂制备方法、沉淀剂的种类和浓度对制备的Ag／TS－1催化剂催化性能的影响，采用TEM，XRD和UV－Vis等表征手段对Ag／TS－1催化剂进行了分析．结果表明，沉积－沉淀法是最佳的催化剂制备方法，但浸渍法也可制得具有环氧丙烷选择性的催化剂．K2CO3是一种良好的沉淀剂．以K2CO3为沉淀剂，硅钛比为64的TS－1为载体制备的Ag／TS－1催化剂上的丙烯转化率为1．72％，环氧丙烷选择性为98．2％．少量单质银的存在有利于环氧丙烷的生成，除银粒子的分散状态外，银粒子与载体TS－1间的相互作用对提高催化剂的选择性具有决定性作用．     

Preparation of Nanoelectrode Ensembles by Assembly of Nano—Silver Colloid on Gold Surface

A novel method for preparing silver nanoelectrode ensembles(SNEEs) and gold nanoelectrode ensembles (GNEEs) has been developed. Silver colloid particles were first absorbed to the gold electrode surface to form a monolayer silver colloid. N-hexadecyl nercaptan was then assembled on the electrode to form a thoil monolayer on which hydrophilic ions cannot be transfered. The SNEEs was prepared by removing thiol from silver colloid surface through applying and AC voltage with increasing frequency at 0.20V(vs.SCE). Finally,GNEEs was obtained by immersing a SNEEs into 6 mol/L HNO3 to remove the silver colloid particles. By comparison with other methods such as template method ect., this method enjoys some advantages of lower resistance, same diameter,easy preparation,controllable size and density.