氟化钡晶体电注入着色临界温度及光谱特性

利用用自行研制的电注入实验装置,对氟化钡晶体进行电注入并使之有效着色. 由基本理论得到氟化钡晶体电注入临界温度,着色氟化钡晶体产生大量F和FA色心. 研究结果表明,经电注入氟化钡晶体,F色心首先在阴极附近产生,而且室温下F色心很不稳定.     

Neutron halos in the excited states for N=127 isotones

Properties of the ground states and the excited states of N=127 isotones are investigated by using the nonlinear relativistic mean field theory with the interactions PK1. By analyzing the rms of proton and neutron, the single particle energies of valence nucleon and the density distributions of neutron, proton and the last neutron, it can be found that there exists a neutron halo in the excited states of 3d5/2, 4s1/2 and 3d3/2 in 209Pb. It is also predicted that there exists a neutron halo in the excited states of 3d5/2, 4s1/2 and 3d3/2 in 207Hg, 208Tl, 210Bi and 211Po.     

Electronic structure and magnetic properties of metastable SmCo_7 compound

1 Introduction The rare-earth transition-metal intermetallic compounds have been widely investi-gated for many years, among them the Sm-Co series compounds with 1:5 and 2:17 crys-tal structures. These compounds have been used as sintered and bonded permanent magnets since the 1960s[1,2]. Interest recently has been focused on the TbCu7-type struc-ture Sm-Co intermetallic compounds with a strong uniaxial magnetocrytalline anisot-ropy and a low temperature coefficient (β = ?0.11%)[3―6] due t…     

质量非均匀分布的烟囱在倾倒过程中的力学分析

烟囱倒塌的过程中可能会在某处断裂.本文研究了质量非均匀的烟囱倾倒过程中各部位的受力与扭矩,并通过扭矩极大值点找出烟囱断裂位置.     

高In组分InGaNAs/GaAs量子阱的生长及发光特性

采用分子束外延技术(MBE)在Ga As衬底上外延生长高In组分(40%)In Ga NAs/Ga As量子阱材料,工作波长覆盖1.3~1.55μm光纤通信波段。利用室温光致发光(PL)光谱研究了N原子并入的生长机制和In Ga NAs/Ga As量子阱的生长特性。结果表明:N组分增加会引入大量非辐射复合中心;随着生长温度从480℃升高到580℃,N摩尔分数从2%迅速下降到0.2%;N并入组分几乎不受In组分和As压的影响,黏附系数接近1;生长温度在410℃、Ⅴ/Ⅲ束流比在25左右时,In_(0.4)Ga_(0.6)N_(0.01)As_(0.99)/Ga As量子阱PL发光强度最大,缺陷和位错最少;高生长速率可以获得较短的表面迁移长度和较好的晶体质量。     

ZnO单晶的微区光致发光特性研究

ZnO单晶材料以其优良的综合性能在光电子器件方面掀起了研究热潮,因此对ZnO单晶的研究具有重要的理论和实践意义。采用激光辐照的方式,对ZnO单晶进行了光致发光(photoluminescence, PL)光谱实验,分析研究了ZnO单晶在不同温度(低温)和不同激光能量强度照射下其光致发光特性。研究结果表明,ZnO单晶内存在少量杂质及表面氧缺陷,这些结构对其发光特性有一定的影响;在低温条件下,ZnO单晶具有良好的发光特性,且随着温度的提高,发光光谱峰的位置会向长波长方向移动,但强度会减小;当激光光源的强度增大,ZnO单晶的PL发射光谱的强度也会随之增大,且峰的位置和相对强度不变。结合拉曼(Raman)光谱实验,从分子及原子振动、转动类型验证了纤锌矿ZnO单晶的六方晶系结构;配合X射线衍射(X-ray diffraction, XRD)技术,得出ZnO单晶良好的结晶特性以及晶轴取向。     

r-过程路径核β——衰变半衰期的估算

分析了20 < A < 190范围内丰中子核β衰变的实验数据,根据半衰期随质子数、中子数以及衰变能变化所呈现的壳效应和对效应等特点,提出了一种有效估算丰中子核β衰变寿命的公式。新的计算公式形式简单包含了较少的参数、计算量小。用该公式能较为准确地再现丰中子核的β衰变半衰期。用RIKEN最新测量丰中子核半衰期检验了该公式的外推能力,本工作可以为r-过程研究提供可靠的输入数据。Experimental data of the β--decay half-lives for the nuclei with atomic number between 20 and 190 are investigated. We have systematically studied the shell effects and pairing effects on β--decay half-lives versus the decay energy Q and nucleon numbers (Z, N). An empirical formula has been proposed to calculate the β--decay half-lives of neutron-rich nuclei. The empirical formula is simple and has relatively few parameters. Experimental β--decay half-lives of the neutron-rich nuclei are well reproduced by the new formula. In addition, the extrapolating capacity of this formula has been checked with the very recent experimental data from RIKEN. The predicted half-lives for r-process relevant nuclei with the current formula can be served as the reliable input of r-process model calculations.     

基于线性方程组数学分离模型建立光纤传感过程检测复方缬沙坦氢氯噻嗪片溶出度

基于线性方程组数学分离模型建立在线过程检测复方缬沙坦氢氯噻嗪片溶出度方法。分别扫描缬沙坦和氢氯噻嗪的紫外吸收光谱,两组分在最大吸收波长处完全重叠。根据朗伯比尔定律吸光度加和性原理,分别测定两组分在最大吸收波长处的吸光系数,建立线性方程组数学分离模型,采用光纤传感过程分析技术(FODT)检测缬沙坦氢氯噻嗪片的溶出度,并与HPLC法相比较。在规定的溶出介质中,两种成分同时实时测定,并且FODT累积溶出度与HPLC法相比较结果无显著性差异(p>0.05)。不同批次药物的溶出行为一致,说明制剂工艺稳定,均匀度好。溶出曲线显示缬沙坦溶出快于并高于氢氯噻嗪,且30 min时两组分的溶出度均大于80%符合美国药典规定。结果表明,应用线性方程组数学分离模型结合FODT法可实现复方缬沙坦氢氯噻嗪片中双组分溶出度的同时检测,并可提供双组分的溶出过程曲线和全部溶出数据,直观反映各组分在各溶出时段的快慢,为此药建立标准提供依据。与HPLC法单点数据相比优势明显,更有利于药品评价和抽验质量分析。