Synchronization of Coupled Oscillators on Newman-Watts Small-World Networks

We investigate the collection behaviour of coupled phase oscillators on Newman-Watts small-world networks in one and two dimensions. Each component of the network is assumed as an oscillator and each interacts with the others following the Kuramoto model We then study the onset of global synchronization of phases and frequencies based on dynamic simulations and finite-size scaling. Both the phase and frequency synchronization are observed to emerge in the presence of a tiny fraction of shortcuts and enhanced with the increases of nearest neighbours and lattice dimensions.     

Effect of Incident Intensity on Films Growth in Pulsed Laser Deposition

Incident intensity, defined by the amount of particles deposited per pulse, is an important parameter in the film growth process of pulsed laser deposition （PLD）. Different from previous models, we investigate the irreversible and reversible growth processes by using a kinetic Monte Carlo method and find that island density and film morphology strongly depend on pulse intensity. At higher pulse intensities, lots of adatoms instantaneously diffuse on the substrate surface, and then nucleation easily occurs between the moving adatoms resulting in more smaller-size islands. In contrast, at the lower pulse intensities, nucleation event occurs preferentially between the single adatom and existing islands rather than forming new islands, and therefore the average island size becomes larger in this case. Additionally, our results show that substrate temperature plays an important role in film growth. In particular, it can determine the films shape and weaken the effect of pulse intensity on film growth at the lower temperatures by controlling the mobility rate of atoms. Our results can match the related theoretical and experimental results.     

退火温度对YBa2Fe3O8的结构与磁性质影响分析

YBa2Fe3O8(YBFO)是具有三方钙钛矿结构的反铁磁(AFM)体,研究它的结构和磁性质对于我们认识三方钙钛矿结构具有重要作用.目前,关于固相法制备YBFO中退火温度方面的研究并不多,而控制退火温度是这种工艺中的重要环节.为制备高含量的YBa2Fe3O8,本文分别在760℃、950℃和1100℃退火温度下,采用固相...     

Radiation-induced changes in electrical conductivity and structure of BaPbO3 after γ-irradiation

Several barium plumbate (BaPbO₃) solid samples, made from PbO and BaCO₃ powder by chemistry liquid-phase coprecipitation, were investigated before and after γ-irradiation. The solid samples were irradiated by a ⁶⁰Co γ-irradiation source whose dose rate is about 0.7?kGy per hour. The irradiation times were 0, 72, 144, 216, 288 and 360?h. Then, the four-probe method, X-ray diffraction (XRD), scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS) were used to indicate the changes in electrical conductivity and microstructure of BaPbO₃ after γ-irradiation. The XRD results indicated that the content of PbO was reduced as the irradiation dose was increased and eventually vanished from the surface of samples. However, there was no new obvious substance phase found from the XRD atlas. It seems that the PbO transformed into nearly amorphous Pb₅O₈. The conjecture could be proved by the results of annealing experiment and SEM. The XPS results seem to show that the microstructure of BaPbO₃ was slightly changed.     

太阳能热气流系统内传热与流动的实验模拟

构建了小尺寸太阳能热气流发电的实验模型,测定了系统的温度随时间和空间的分布,测定了烟囱内的速度随时间的变化关系.实验结果表明:集热棚内温度分布和季节对系统传热与流动特性的影响符合理论分析结果,而由于烟囱较薄,散热较高,在烟囱内的温度降低显著.     

表面状态对强流脉冲电子束辐照诱发金属表面熔坑的影响

 为了考察材料晶体学特性对表面熔坑形成机制的影响,利用强流脉冲电子束（HCPEB）对喷丸前、后的304奥氏体不锈钢进行表面辐照处理,对HCPEB诱发的表面熔坑形貌进行了详细的表征。实验结果表明,HCPEB辐照后样品表面形成了大量的火山状熔坑,熔坑数密度和熔坑尺寸随电子束能量的增加而减小,材料表面的杂质或夹杂物容易成为熔坑的核心,并在熔坑形成的喷发过程中被清除,起到净化表面的作用。此外,喷丸前、后样品表面熔坑数密度遵循相似的分布规律,喷丸处理使熔坑数密度显著增大,表明材料的晶体学特性对表面熔坑形成有重要的影响,晶界、位错等结构缺陷是熔坑形核的择优位置。     

闪光照相中FXRMC和MCNP4B的散射比较研究

 散射问题是高能辐射成像研究中的一个重要问题,采用蒙特卡罗模拟来确定散射对提取客体信息的影响是一种重要的研究手段。简单介绍了FXRMC和MCNP4B程序的特点及其记录方式;在确保相同输入参数的条件下,针对不同的照相模型进行了对比计算。结果表明两个程序计算的散射照射量相对差别小于5%,说明这两个程序具有较高的符合程度。通过与实验结果的比较发现,这两个程序模拟的散射分布与实验结果基本一致,均可用于高能闪光照相的模拟研究。还给出了在散射检验方面的一些建议。     

p型未掺杂富锌ZnO薄膜的形成和性能研究

以高纯ZnO为靶材,氩气为溅射气体,利用射频磁控溅射技术在石英衬底上生长出纤锌矿结构的富锌ZnO薄膜.薄膜沿(002)择优取向生长,厚约为1.2μm,呈现电绝缘特性.将溅射的ZnO薄膜在10-3Pa,510~1 000 K的温度范围等温退火1 h,室温Hall测量结果表明ZnO薄膜的导电性能经历了由绝缘—n型—p型—n型半导体的变化.XPS测试表明ZnO薄膜的Zn/O离子比随退火温度的升高而降低,但一直是富锌ZnO,说明未掺杂的富锌ZnO也可以形成p型导电.p型未掺杂富锌ZnO薄膜的形成可归因于VZn受主浓度可以克服VO和Zni本征施主的补偿效应.     

表面垂直裂痕诱发瑞利波散射的数值分析

激光激发的声表面波为材料表面缺陷的检测提供了有力的工具.针对含缺陷材料在模型边界上的复杂性,建立了基于平面应变的有限元模型并选取了相同厚度但含有不同深度的表面裂痕的单层铝板进行了对比计算,得到了声表面波经过不同深度的表面裂痕时产生的反射及透射信号波形的时域特征.进而引入了基于Wigner-Ville分布理论的时-频分析方法计算裂痕前、后散射的瞬态表面波的能量在时间-频率平面内分布的情形.结果显示：声表面波接近中心频率的某一频率成分在经过深度小于其中心波长的表面缺陷时,随着裂痕深度的增加,对应于该频率的反射系数呈现单调递增的趋势;而透射系数呈现递减的特征,这一结果可以为激光超声检测表面缺陷提供一种定量的表征手段.     

含铱配合物的聚对苯类电磷光聚合物

通过Suzuki聚合法合成了以聚对苯为主链的含铱配合物的电磷光共轭聚合物。部分苯环单元被β-二酮结尾的烷氧基链取代,进而与2-苯基吡啶配位形成悬垂的铱配合物侧链。宽带隙的聚对苯主链使主体与客体的能级匹配,从而有利于能量的转移。铱配合物通过长β-二酮结尾的烷氧基链悬挂在聚对苯的侧链上提高了聚合物的溶解性,有利于器件的制作。另外,由于连在氧原子上的β-二酮具有较大的旋转自由度,增大了β-二酮的反应活性有利于配位反应的进行。聚合物的EL光谱只显示客体铱配合物的发射,主体的发射已被完全猝灭。这表明聚合物主体和铱配合物客体之间发生了有效的能量转移。PPPIrPPy2聚合物发光器件的EL光谱发光波长为525nm,最大外量子效率为2.6%。