线性扫描伏安法研究大豆甙元与牛血清白蛋白的相互作用

采用线性扫描伏安法研究了大豆甙元与牛血清白蛋白(BSA)之间的相互作用;探讨了缓冲体系、pH、反应时间、反应温度、扫描速率等对相互作用的影响.结果表明,在pH为7.4的B-R缓冲溶液中,大豆甙元与BSA在相互作用20min后形成1∶1型的单一的非电活性超分子化合物,两者的结合常数β=8.29×105 L·mol-1,转移系数α=0.367 9,表观电子传递速率常数ks为1.39s-1.     

含吡啶基团的双极主体材料的合成、性能与蓝光电致磷光器件研究

吡啶类衍生物具有较好的电子传输性能和较高的三线态能级,在有机电致发光中一般用来构建电子传输材料或主体材料中的电子传输单元.本文通过将吡啶的2,6位与三苯胺或N-苯基-咔唑的邻位连接设计合成了两个基于吡啶的双极主体材料DTPAPPy和DCzPPy.它们的三线态能级分别为2.64和2.70eV.以它们作为主体材料制备的基于Firpic的蓝光磷光器件最大电流效率分别为15.4和25.3cd/A.     

Ce、La改性的Fe-ZSM-5催化剂对NH3-SCR反应性能的影响

采用共浸渍法制备了整体式Ce-Fe/ZSM-5催化剂并用于NH3-SCR反应。实验结果表明,所制备的催化剂具有良好的低温起燃性能,当反应空速为30,000h-1时,起燃温度T50为239℃,完全转化温度T90为328℃。同时该催化剂具有良好的抗水热老化能力、抗硫性和空速性能,表明其具有很好的应用前景。     

阳离子聚丙烯酰胺的聚合方法研究进展

论文评述和探讨了目前阳离子聚丙烯酰胺的几种常见的聚合方法,包括水溶液聚合、反相乳液聚合、分散聚合及光引发聚合,对各聚合方法的优缺点进行了比较,并且对各种方法的产业化进行了分析,提出了光引发聚合法的发展前景,认为有必要深入开展光引发聚合机理及相关技术研究。     

Coagulation behaviors and in-situ flocs characteristics of composite coagulants in cyanide-containing wastewater: Role of cationic polyelectrolyte

In this paper,composite coagulants(PFS,PFSC05,PFSC1 and PFSC5),prepared by mixing polyferric sulfate(PFS)and cationic polyelectrolyte(CP)coagulants with different weight percent(Wp)of CP(Wp=0%,0.5%,1%and 5%,respectively),were adopted to treat cyanide-containing wastewater.PFSC5 exhibited superior coagulation performances at optimal conditions:the removal of total cyanide(TCN)and chemical oxygen demand(COD)was 95%–97%and 50%–55%,respectively.The effects of CP on the properties and structure of flocs were investigated by laser diffraction instrument and small-angle laser light scattering(SALLS),respectively.The results show that the flocs of PFSC5 have higher growth rate,higher strength factor and lower recovery factor than other flocs.They are also much denser and more uniform owing to the higher fractal dimension(Df)and less microflocs(10–100 m).Furthermore,the dense structure of the PFSC5 flocs can be restored after shear and is more resistant to hydraulic conditions.Particularly,detailed morphology evolution of the flocs was in-situ detected by on-line particle imaging.Due to strong ionic strength in wastewater,the CP in PFSC5 plays a significant role of adsorption,while the main mechanism of CP is electrostatic patch aggregation during the PFSC05 systems.     

Trigonal‐Bipyramidal and Square‐Pyramidal Chromium?Manganese Chalcogenide Clusters, [E2CrMn2(CO)n]2− (E=S,Se, Te; n=9, 10): Synthesis,Electrochemistry, UV/Vis Absorption,and Computational Studies

The reactions of E powder (E=S, Se) with a mixture of Cr(CO)₆ and Mn₂(CO)₁₀ in concentrated solutions of KOH/MeOH produced two new mixed Cr? Mn? carbonyl clusters, [E₂CrMn₂(CO)₉]^2? (E=S, 1 ; Se, 2 ). Clusters 1 and 2 were isostructural with one another and each displayed a trigonal‐bipyramidal structure, with the CrMn₂ triangle axially capped by two μ₃‐E atoms. The analogous telluride cluster, [Te₂CrMn₂(CO)₉]^2? ( 3 ), was obtained from the ring‐closure of Te₂Mn₂ ring complex [Te₂Mn₂Cr₂(CO)₁₈]^2? ( 4 ). Upon bubbling with CO, clusters 2 and 3 were readily converted into square‐pyramidal clusters, [E₂CrMn₂(CO)₁₀]^2? (E=Se, 5 ; Te, 6 ), accompanied with the cleavage of one Cr? Mn bond. According to SQUID analysis, cluster 6 was paramagnetic, with S=1 at room temperature; however, the Se analogue ( 5 ) was spectroscopically proposed to be diamagnetic, as verified by TD‐DFT calculations. Cluster 6 could be further carbonylated, with cleavage of the Mn? Mn bond to produce a new arachno‐cluster, [Te₂CrMn₂(CO)₁₁]^2? ( 7 ). The formation and structural isomers, as well as electrochemistry and UV/Vis absorption, of these clusters were also elucidated by DFT calculations.     

Zinc Porphyrins with a Pyridine‐Ring‐Anchoring Group for Dye‐Sensitized Solar Cells

Anchoring groups are extremely important in controlling the performance of dye‐sensitized solar cells (DSCs). The design and characterization of sensitizers with new anchoring groups, in particular non‐carboxylic acid groups, has become a recent focus of DSC research. Herein, new donor? π? acceptor zinc? porphyrin dyes with a pyridine ring as an anchoring group have been designed and synthesized for applications in DSCs. Photophysical and electrochemical investigations demonstrated that the pyridine ring worked effectively as an anchoring group for the porphyrin sensitizers. DSCs that were based on these new porphyrins showed an overall power‐conversion efficiency of about 4.0 % under full sunlight (AM 1.5G, 100 mW cm^?2).     

Ligand‐Functionalization of BPEI‐Coated YVO4:Bi3+,Eu3+ Nanophosphors for Tumor‐Cell‐Targeted Imaging Applications

In this study, surface‐functionalized, branched polyethylenimine (BPEI)‐modified YVO₄:Bi³⁺,Eu³⁺ nanocrystals (NCs) were successfully synthesized by a simple, rapid, solvent‐free hydrothermal method. The BPEI‐coated YVO₄:Bi³⁺,Eu³⁺ NCs with high crystallinity show broad‐band excitation in the λ=250 to 400 nm near‐ultraviolet (NUV) region and exhibit a sharp‐line emission band centered at λ=619 nm under excitation at λ=350 nm. The surface amino groups contributed by the capping agent, BPEI, not only improve the dispersibility and water/buffer stability of the BPEI‐coated YVO₄:Bi³⁺,Eu³⁺ NCs, but also provide a capability for specifically targeted biomolecule conjugation. Folic acid (FA) and epidermal growth factor (EGF) were further attached to the BPEI‐coated YVO₄:Bi³⁺,Eu³⁺ NCs and exhibited effective positioning of fluorescent NCs toward the targeted folate receptor overexpressed in HeLa cells or EGFR overexpressed in A431 cells with low cytotoxicity. These results demonstrate that the ligand‐functionalized, BPEI‐coated YVO₄:Bi³⁺, Eu³⁺ NCs show great potential as a new‐generation biological luminescent bioprobe for bioimaging applications. Moreover, the unique luminescence properties of BPEI‐coated YVO₄:Bi³⁺,Eu³⁺ NCs show potential to combine with a UVA photosensitizing drug to produce both detective and therapeutic effects for human skin cancer therapy.     

Highly selective synthesis of single-walled carbon nanotubes from methane in a coupled Downer-turbulent fluidized-bed reactor

For the synthesis of single-walled carbon nanotubes (SWCNTs) from CH₄ over a Fe/MgO catalyst, we proposed a coupled Downer-turbulent fluidized-bed (TFB) reactor to enhance the selectivity and yield (or production rate) of SWCNTs. By controlling a very short catalyst residence time (1–3 s) in the Downer, only part of Fe oxides can be reduced to form Fe nano particles (NPs) available for the growth of SWCNTs. The percentage of unreduced Fe oxides increased and the yield of SWCNTs decreased accordingly with the increase of catalyst feeding rate in Downer. SWCNTs were preferentially grown on the catalyst surface and inhibited the sintering of the Fe crystallites which would be formed thereafter in the downstream TFB, evidenced by TEM, Raman and TGA. The coupled Downer-turbulent fluidized-bed reactor technology allowed higher selectivity and higher production rate of SWCNTs as compared to TFB alone.     

Self-assembly of coil-rod-coil molecules into bicontinuous cubic and oblique columnar assemblies depending on coil chain length

Coil-rod-coil molecules 1–3, consisting of four biphenyls and a p-terphenyl unit linked together with ether bonds as a rod segment and poly(propylene oxide) (PPO) with a degree of polymerization (DP) of 7, 12, 17 as coil segments were synthesized. These molecules contain lateral methyl groups at 2 and 5 positions of the middle benzene ring of p-terphenyl. The self-assembling behavior of molecules 1–3 was investigated by means of DSC, POM and SAXS in the bulk state. Molecule 1 self-organizes into a lamellar structure in the bulk state and transfers into a bicontinuous cubic structure in the liquid crystalline phase. While, molecules 2, 3 containing longer coil chains than 1 self-assemble into the hexagonal perforated lamellar (HPL) structures and the oblique columnar structures in the solid state and liquid crystalline phase, respectively. These results reveal that self-organizing behavior of such molecules is dramatically influenced by the length of the coil chains connected with the rod building block, as well as the lateral methyl groups incorporating in the middle of the rod segment.