Preparation of Iodide Selective Carbon Paste Electrode with Modified Carbon Nanotubes by Potentiometric Method and Effect of CuS‐NPs on Its Response

In this research, multiwalled carbon nanotubes (MWCNTs) was oxidized and chemically modified through reaction with 3‐(trimethoxysilyl)propan‐1‐amine (TMSPA) and their subsequent reaction with 2‐hydroxy‐3‐methoxy benzaldehyde. Subsequently, this material was metalized by reaction with copper acetate that lead to formation and impergeation of 2‐methoxy‐6‐((3‐(trimethoxysilyl)propylimino)methyl)phenol MMSPIMP? MWCNT‐Cu. This novel material was identified with different techniques such as SEM and FT‐IR analysis. In this work, the reported material are exhibited high accurate and repeatable monitoring of iodide due to its high surface area with various reactive centre. It exhibited selectivity for iodide over the wide linear dynamic range between 1.8×10^?6 and 1.15×10^?1 M, with a Nernstian slope of ?59.12±0.7 mV per decade of activity and detection limit of 1.8×10^?6 M. Copper sulfide nanoparticles were prepared and their effect on the electrode response was investigated. The results were improved in the presence of nanoparticles with fast and stable response, good reproducibility, long‐term stability, high selectivity over the presence of common organic and inorganic anions, high detection limit and dynamic range. The proposed sensor has been applied as potentiometric determination of some iodine species over a pH range of 2.5–10.     

Silver nanoparticle loaded on activated carbon and activated carbon modified with 2-(4-isopropylbenzylideneamino)thiophenol (IPBATP) as new sorbents for trace metal ions enrichment

The efficiencies and performances of silver nanoparticle loaded activated carbon modified with 2-(4-isopropylbenzylideneamino)thiophenol (IPBATP-Ag-NP-AC) and activated carbon modified with IPBATP (IPBATP-AC), as new sorbents, were evaluated for separation and preconcentration of Cu²⁺, Zn²⁺, Co²⁺, Cd²⁺ and Pb²⁺ ions from real environmental samples. The retained metals content was reversibly eluted using 5?mL of CH₃COOH (6.0?mol?L^?1) and/or 10?mL of 4.0?mol?L^?1 HNO₃ for IPBATP-Ag-NP-AC and IPBATP-AC, respectively. The experimental parameters influence the recoveries of metal ions including pH, amounts of ligand and supports, condition of eluents, sample and eluent flow rates of has been investigated. The preconcentration factors were found to be 100 for Zn²⁺, Cd²⁺, Co²⁺, Cu²⁺ and 50 for Pb²⁺ ions using IPBATP-Ag-NP-AC, and 50 for Zn²⁺, Cd²⁺, Co²⁺, Cu²⁺ and 25 for Pb²⁺ ions using IPBATP-AC. The detection limit of both SPE-based sorbents was between 1.6–2.5?ng?mL^?1 for IPBATP-AC and 1.3–2.5?ng?mL^?1 for IPBATP-Ag-NP-AC. The proposed methods have been successfully applied for the extraction and determination of the understudy metal ions content in some real samples with extraction efficiencies higher than 90% and relative standard deviations (RSD) lower than 2.4%.     

Simultaneous preconcentration of copper, nickel, cobalt and lead ions prior to their flame atomic absorption spectrometric determination

A sensitive and simple method for the simultaneous preconcentration of nutritionally important minerals in real samples has been reported. The method is based on the adsorption of Cu2+, Ni2+, Co2+ and Pb2+ on 4-propyl-2-thiouracil (PUT) loaded on activated carbon. The metals on the complexes are eluted using 5 mL 3 M HNO3 in acetone. The influences of the analytical parameters including pH and sample volume were investigated. The effects of matrix ions on the retentions of the analytes were also examined. The recoveries of analytes were generally higher than 95%. The detection limits for Cu2+, Ni2+, Co2+ and Pb2+ were 1.6, 1.3, 1.2, 2.3 ng ml(-1), respectively. The method has been successfully applied for these metals content evaluation in some real samples including natural water samples.     

Potentiometric study of binary complexes of methyl 2-pyridyl ketone oxime, phenyl 2-pyridyl ketone oxime and diacetyl monooxime with some transition and heavy metal ions in aqueous solution

The complexation reaction between some oximes including methyl-2-pyridylketone oxime (MPKO), phenyl-2-pyridylketone oxime (PPKO) and diacetyl monooxime (DMO) with some transition and heavy metal ions Co2+, Ni2+, Zn2+, Pb2+, Fe2+, Fe3+, Cr3+ and La3+ has been studied potentiometrically in aqueous solution at 25+/-0.1 degrees C and ionic strength (mu) of 0.1M supported by KCl. The overall stability constants logbeta's of respective species were obtained by computer refinement of pH-volume data using BEST program. The best model among the several proposed models was selected according to the lowest sigma(fit) value. The main species in binary systems are ML, ML2, MLH, MLH2, ML2H, ML2H2, MOHL, M(OH)2L, M(OH)L2 and M(OH)2L2 (L = MPKO or PPKO or DMO).     

Determination of Cu,Fe, Pb and Zn by Flame‐AAS after Preconcentration Using Sodium Dodecyl Sulfate Coated Alumina Modified with Complexing Agent

A sensitive and simple method for the simultaneous preconcentration of trace transition and heavy metal ions is reported. The method is based on the adsorption of Cu, Fe, Pb and Zn on N,N′‐Diacetyl‐4‐bromo‐2,6‐di(aminomethyl)anisole (DABDAMA) loaded on sodium dodecyl sulfate (SDS) coated alumina. The metal content on the complexes are eluted using 6 mL of 2 mol l⁻¹ nitric acid. The influences of the analytical parameters including pH and sample volume were investigated. The effects of matrix ions on the retentions of the analytes were also examined. The recoveries of analytes were generally higher than 95% with a low RSD. The method has been successfully applied for these metals content evaluation in samples including soil, blood and vegetable samples.     

Application of Cloud Point Extraction for Copper,Nickel, Zinc and Iron Ions in Environmental Samples

A cloud point extraction procedure was presented for the preconcentration of copper, nickel, zinc and iron ions in various samples. After complexation by 2‐(6‐(1H‐benzo[d]imidazol‐2‐yl)pyridin‐2‐yl)‐1H‐benzo[d]Imidazole (BIYPYBI), analyte ions are quantitatively extracted in Triton X‐114 following centrifugation. 1.0 mol L^?1 HNO₃ nitric acid in methanol was added to the surfactant‐rich phase prior to its analysis by flame atomic absorption spectrometry (FAAS). The adopted concentrations for BIYPYBI, Triton X‐114 and HNO₃ and bath temperature, centrifuge rate and time were optimized. Detection limits for Cu²⁺, Fe³⁺, Zn²⁺ and Ni²⁺ ions was 1.4, 2.2, 1.0 and 1.9 ng mL^?1, respectively. The preconcentration factors for all ions was 30, while the enrichment factor of Cu²⁺, Fe³⁺, Zn²⁺ and Ni²⁺ ions was 35, 25, 39 and 30, respectively. The proposed procedure was applied to the analysis of real samples.     

Use of metal composite MOF‐5‐Ag2O‐NPs as an adsorbent for the removal of Auramine O dye under ultrasound energy conditions

In this work, MOF‐5 composited with Ag₂O nanoparticles was prepared and characterized via X‐ray diffraction, field emission‐scanning electron microscopy, energy‐dispersive spectroscopy and FT‐IR analysis. This new material was subsequently employed for removing basic yellow dye [Auramine O (AO)] from aqueous solution under ultrasound irradiation. Several experiments were designed by central composite design in which operational parameters such as such as pH, MOF‐5‐Ag₂O mass and initial concentration of AO involved in the process were optimized. The significance of individual parameters and their possible interactions were investigated using analysis of variance (anova ). The optimum values of 6, 0.025 g and 6 mg l^?1 were obtained for the pH, MOF‐5‐Ag₂O‐NPs mass and the initial concentrations of AO, respectively, with desirability of 1.0. At such conditions, the efficiency for the removal of AO was found to be 89.45%. Various isotherm models for fitting the experimental equilibrium data were studied, and it was found that the Langmuir model has the highest efficiency for correlation of experimental equilibrium data, so that the monolayer adsorption capacity of MOF‐5‐Ag₂O for successful removal of AO was 260.70 mg g^?1 at optimal conditions.     

Magnetic molecularly imprinted polymer for the efficient and selective preconcentration of diazinon before its determination by high‐performance liquid chromatography

A molecularly imprinted polymer was selectively applied for solid‐phase extraction and diazinon residues enrichment before high‐performance liquid chromatography. Diazinon was thermally copolymerized with Fe₃O₄@polyethyleneglycol nanoparticles, methacrylic acid (functional monomer), 2‐hydroxyethyl methacrylate (co‐monomer), and ethylene glycol dimethacrylate (cross‐linking monomer) in the presence of acetonitrile (porogen) and 2,2‐azobisisobutyronitrile (initiator). Then, the imprinted diazinon was reproducibly eluted with methanol/acetic acid (9:1, v/v). The sorbent particles were characterized by X‐ray diffraction, Fourier transform infrared spectroscopy, and scanning electron microscopy. The comprehensive study of variables through experimental design showed that the maximum performance was achieved under these conditions: pH 7, 10 mL sample volume, 15 mg sorbent, 10 min vortex time, 5 min ultrasonic time, 200 μL methanol/acetic acid (9:1, v/v) as eluent, and 5 min desorption time. Under optimized conditions, the molecularly imprinted polymer solid‐phase extraction method demonstrated a linear range (0.02–5 g/mL), a correlation coefficient of 0.997, and 0.005 g/mL detection limit.     

Selective and sensitized spectrophotometric determination of trace amounts of Ni(II) ion using alpha-benzyl dioxime in surfactant media

Highly sensitive and interference-free sensitized spectrophotometric method for the determination of Ni(II) ions is described. The method is based on the reaction between Ni(II) ion and benzyl dioxime in micellar media in the presence of sodium dodecyl sulfate (SDS). The absorbance is linear from 0.1 up to 25.0 microg mL-1 in aqueous solution with repeatability (RSD) of 1.0% at a concentration of 1 microg mL-1 and a detection limit of 0.12 ng mL-1 and molar absorption coefficient of 68,600L mol-1 cm-1. The influence of reaction variables including type and amount of surfactant, pH, and amount of ligand and complexation time and the effect of interfering ions are investigated. The proposed procedure was applied to the determination of trace amounts of Ni(II) ion in tap water, river water, chocolate and vegetable without separation or organic solvent extraction.     

The Use of Ultrasound in pipette‐tip solid‐phase extraction based on CuS@ZnS@Fe3O4‐CNTs for pre‐concentration of tartrazine in water samples

This paper report a novel strategy for synthesis and application of CuS@ZnS@Fe₃O₄‐CNTs composite which has great potentials as artificial receptor for tartrazine trapping due to its ultrahigh surface area and functionality which is related to application of electrochemical route. A durable and economical pipette‐tip CuS@ZnS@Fe₃O₄‐CNTs nano‐composite miniaturized solid phase extraction coupled with UV‐Vis spectrophotometry was developed for clean‐up and determination of tartrazine from various water samples. Undoubtedly, presence of mild‐intensity/frequency ultrasound irradiation played a key role for reducing consumption of eluent volume by broking hydrogen bonds between retained analyte and sorbent. The influence of factors including pH, sorbent dosage, sonication time and eluent volume were investigated and optimum conditions were obtained using experimental design methodology. Under optimized conditions, good extraction efficiencies for the analyte were obtained with no matrix interference in the subsequent UV‐Vis. Good linearity for tartrazine in the range of 20‐5000 ng mL^‐1 with correlation coefficients of R² ≥ 0.99 and low detection limit close to 4.76 ng mL^‐1 reveals high applicability of method for trace analysis.