C_（60）的胺加成反应和电喷雾电离质谱（ESI－MS）检测

报道了Ｃ６０与１，３－丙二胺和Ｎ，Ｎ－二甲基－１，３－丙二胺的加合反应，反应产物未经预先离子化处理直接用ＥＳＬ－ＭＳ进行检测。由于反应产物从甲苯溶液中析出，避免了生成多胺基加合物，产物以单加成物为主。当加合反应在空气氛下进行时，有加合氧的产物Ｃ６０Ｏｎ（ＮＨ２—ＣＨ２ＣＨ２ＣＨ２ＮＲ２）ｍ（Ｒ＝Ｈ，ＣＨ３）存在。实验发现：Ｎ，Ｎ－二甲基－１，３－丙二胺比１，３－丙二胺更容易与Ｃ６０发生多胺基加成和氧加成反应。通过控制反应条件可制备Ｃ６０二胺的单加成产物。     

Effect of microstructure on molecular oxygen permeation through condensed phospholipid monolayers

A method is presented that allows novel measurement of the effect of microstructure on the oxygen permeability of highly condensed, polycrystalline phospholipid monolayers. Oxygen permeability of the polycrystalline shell coating a stationary microbubble is measured directly using an apposing microelectrode in the induced transfer mode and modeling oxygen flux through the shell and intervening aqueous medium. Varying cooling rate through the phospholipid main phase transition permits control of shell microstructure by manipulation of crystalline domain size and shape. Domain boundary density, defined as the ratio of the mean domain perimeter to the mean domain area, of the microbubble shell is determined by fluorescence microscopy. Oxygen permeability was shown to increase linearly with domain boundary density at a constant phospholipid acyl chain length and, accordingly, was shown to decrease exponentially with increasing chain length at a constant domain boundary density. Modification of the energy barrier theory to account for microstructural effects, in terms of the domain boundary density, provides a general equation to model passive transport through polycrystalline monolayer films. Results from this method show promise in determining the gas transport kinetics of medical microbubbles and the gas exchange characteristics of biological monolayers.     

Physico-chemical Characterization of Mo-Hβ Zeolite Catalysts

A series of Mo-impregnated Hβ samples, with MoO3 loading in Hβ zeolite in the mass fraction range of 0. 5%-6.0%, were studied by means of XRD and IR in order to characterize their structures. Mo/Hβ sampies‘ crystallinity almost linearly decreases with increasing the amount of MoO3 loaded, The IR spectra and XRD patterns suggest that the progressive destabilization of the Hβ zeolite structure is caused by increasing Mo loading in (MoO3 Hβ zeolite). During the calcination, Al2(MoO4)3 formed from the dealumination of Hβ zeolite, causes the substantially partial breakdown of the zeolite framework when the Mo loading in MoO3 Hβ is relatively high.     

Colorimetric anion chemosensor based on 2-aminobenzimidazole: naked-eye detection of biologically important anions

We synthesized a novel colorimetric anion chemosensor bearing benzimidazole motifs as recognition sites in the pods of the receptor. The addition of tetrabutylammonium salts of F⁻ or AcO⁻ to the solution of receptor caused dramatic color changes from colorless to yellow, which was clearly visible to the naked eye. The receptor showed no significant changes on addition of other anions such as Cl⁻, Br⁻, I⁻, NO₃⁻, and H₂PO₄⁻.     

DNA电化学生物传感器测定水中痕量铅

采用物理涂附法将单链DNA固定到金表面得到ssDNA/Au修饰电极。研究表明,该电极在pH 5,0.2 mol/L NaAc-HAc缓冲底液中,可用于测定水中痕量Pb2 。Pb2 以Pb-DNA络合物的形式吸附在电极上,以示差脉冲伏安法测定Pb2 ,在0.15 V(vsSCE)处有灵敏的氧化峰,其峰电流与Pb2 浓度在5.0×10-8~1.0×10-6mol/L范围内呈良好的线性关系,此法的检测限为2.0×10-8mol/L,该修饰电极的稳定性和抗干扰性都较好。用该电极对饮用水中的Pb进行检测,得到了满意的结果。     

单分散磁性P(St/BA/MAA)微球的制备

在共沉淀法合成超细磁流体的基础上 ,以苯乙烯 (St)、丙烯酸丁酯 (BA)和甲基丙烯酸 (MAA)为共聚单体 ,在不同的介质体系中采用无皂乳液聚合法制备了单分散 ,粒径范围为 80～ 2 30nm的磁性P(St BA MAA)微球 .详细探讨了介质极性、磁流体中表面活性剂含量对磁性高分子微球粒径和单分散性的影响 .实验结果表明 ,在一定范围内随介质极性降低 ,磁性高分子微球的单分散性提高 ,随表面活性剂用量增加 ,单分散性变差 .总体来看 ,磁性高分子微球的单分散性与其表面静电斥力密切相关 ,过大或过小的静电斥力均会导致磁性高分子微球单分散性的降低 .     

Novel Pb(II), Zn(II), and Cd(II) coordination polymers constructed from ferrocenyl-substituted carboxylate and bipyridine-based ligands

Treatment of two kinds of ferrocenyl-substituted carboxylate ligands (3-ferrocenyl-2-crotonic acid, HOOC-CH=(CH(3))CFc (Fc=(eta(5)-C(5)H(5))Fe(eta(5)-C(5)H(4))) or O-ferrocecarbonyl benzoic acid, o-HOOCC(6)H(4)COFc with Pb(OAc)(2).3H(2)O, Zn(OAc)(2).2H(2)O, or Cd(OAc)(2).2H(2)O) resulted in four novel ferrocene-containing coordination polymers [[Pb(mu(2)-eta(2)-OOCCH=(CH(3))CFc)(2)].MeOH](n) (1), [[Zn(o-OOCC(6)H(4)COFc)(2)(4,4'-bipy)(H(2)O)(2)].2MeOH.2H(2)O](n) (4,4'-bipy = 4,4'-bipyridine) (2), [[Cd(o-OOCC(6)H(4)COFc)(2)(bpe)(MeOH)(2)].2H(2)O](n) (bpe = 1,2-bis(4-pyridyl)ethene) (3), and [Pb(o-OOCC(6)H(4)COFc)(eta(2)-o-OOCC(6)H(4)COFc)(bpe)](n)() (4). Their crystal structures have been characterized by single X-ray determinations. In polymer 1, Pb(II) ions are bridged by tridentate FcC(CH(3))=CHCOO(-) anions, forming an infinite chain [Pb(mu(2)-eta(2)-OOC=CH(CH(3))CFc)(2)](n). In polymers 2-4, there are three kinds of components, metal ions, o-FcCOC(6)H(4)COO(-) units, and organic bridging ligands. The bipyridine-based ligands connect metal ions leading to a one-dimensional chain with o-FcCOC(6)H(4)COO(-) units acting as monodentate or chelate ligands in the side chain. Such coordination polymers containing ferrocenyl-substituted carboxylate and bipyridine-based ligands are very rare. The solution-state differential pulse voltammetries of polymers 1-4 were determined. The results indicate that the half-wave potential of the ferrocenyl moieties is influenced by the Pb(II) ions in polymer 1 and strongly influenced by Zn(II), Cd(II), or Pb(II) ions in polymers 2-4. The thermal properties of the four polymers were also investigated.     

A New Activation Method for Electroless Metal Plating：Palladium Laden via Bonding with Self—Assembly Monolayers

A new activation method has been developed for electroless copper plating on silicon wafer based on palladium chemisorption on SAMs of APTS without SnCl2 sensitization and roughening condition.A closely packed electroless copper film with strong adhesion is successfully formed by AFM observation.XPS study indicates that palladium chemisorption occurred via palladium chloride bonding to the pendant amino group of the SAMs.     

SYNTHESIS AND CHARACTERISTICS OF POLY(ARYLENE ETHER DIKETONE)S

Poly(arylene ether diketone)s were prepared by the aromatic nucleophilicdisplacement reaction of 4,4'-difluorobenzil with different bisphenols in the presence of an-hydrous potassium carbonate in diphenylsulfone at elevated temperature. The polymersobtained had inherent viscosity of 0.51 ～ 0.63 dL/g, and exhibited glass transition temper-ature ranging from 136 ～217℃ mainly depending on the bisphenols used in the polymersynthesis. Thermogravimetry of these polymers showed excellent thermal stability, indi-cating that 10% weight losses of the polymers were observed in the range above 428℃ and438℃ in air and nitrogen, respectively. The mechanical properties of these polymers werealso described and the permeability of five polymers for H_2, O_2 and N_2 was determined at30℃.     

MORPHOLOGICAL STUDIES ON THERMOTROPIC LIQUID CRYSTALLINE POLYESTER——MORPHOLOGY OF SHEAR ORIENTED FILMS

The morphology of shear-oriented films of a thermotropic liquid crystalline polyester containing a triad ester mesogenic unit and a flexible spacer has been investigated in details. The formation conditions and process, the fine structures and the relaxation process of mat structure in the oriented films have been observed and discussed.