Effect of the Spherical Silica Surface on the Photoluminescence of the Loaded CdS Nanoparticles

CdS nanoparticles were formed on the surface of silica microspheres by the improved layer‐by‐layer self‐assembled technique. High‐resolution electron microscope (HRTEM) image and energy dispersive x‐ray analysis (EDX) confirmed formation of a quasi‐continuous CdS nanoparticles film on the silica microspheres. The results of UV‐vis and fluorescence spectra display that the spherical silica surface has a great effect on the photoluminescence of the loaded CdS nanoparticles. In contrast to the CdS nanoparticles powder, the composite can exhibit the emission ascribed to the band gap transition when the CdS nanoparticles film is relatively thick. This phenomenon is probably due to an enhancement of the crystallinity of CdS nanoparticles induced by the silica spheres.     

Photocatalytic Activity of High Aspect Ratio TiO2 Nanorods

In this article, TiO₂ nanorods (aspect ratio >20) were prepared through a polyol process and doped with metal ions (Cu²⁺, Ni²⁺, Fe³⁺, and Cr³⁺). Compared with TiO₂ nanoparticles, the TiO₂ nanorods displayed relatively higher photocatalytic activity for the degradation of copper sulfophthalocyanine. Moreover, the photocatalytic activity was greatly enhanced when the metal ions were doped in the TiO₂ nanorods.     

Electrical Property of Tin Oxide Doped with Multi‐Walled Carbon Nanotubes

Tin oxide doped with multi‐walled carbon nanotubes (MWNTs) was prepared via a wet‐chemical process and characterized with x‐ray diffraction (XRD) and transmission electron microscope (TEM). Meanwhile, the conductivity of composites obtained was measured using Source Meter. The results show that carbon nanotubes have great effect on the electrical property of SnO₂ nanoparticles. Compared with undoped SnO₂ nanoparticles, the resistivity of SnO₂ nanoparticles doped with 0.3‰ wt MWNTs decreased by a factor of 37. This may be ascribed to the presence of π energy levers of MWNTs and their high aspect ratio. Moreover, the effect of annealing temperature on the electrical property of SnO₂ nanoparticles doped with MWNTs also was discussed.     

电化学石英晶体微天平研究高氯酸钠水溶液中活性炭电极的离子存储行为

以电化学石英晶体微天平(EQCM)为主要测试手段,在不同浓度的高氯酸钠(NaClO4)水溶液中研究了水合离子吸附到活性炭电极孔隙过程中电极的质量变化.对于每种电解液,根据Raman光谱和EQCM数据分别计算了本体溶液中和电极/溶液界面上Na+的水合数.通过比对这两组Na+水合数,探讨了Na+存储到活性炭负极过程中的去溶剂化效应.     

基于核酸分子杂交的免疫芯片抗体固定新方法

基于核酸分子杂交原理构建了一种新型抗体固定方法.先将抗体与寡核苷酸单链交联,再将两者的复合物与固相载体表面上的互补寡核苷酸链结合,从而将抗体固定到载体的表面.在磁珠表面对该固定方法进行实验,证明了方法的可行性.以本方法构建了针对转基因Bt Cry1Ac蛋白的免疫芯片,用Cy3标记二抗对其探针固定效果进行分析,并且在芯片上对Bt Cry1 Ac蛋白进行梯度浓度检测试验.结果表明,以本方法构建的抗体芯片,探针分布具有良好的特异性;探针层分布均匀,非特异吸附小;检测灵敏度达到0.01 ～ 0.05 μg/L;此外,通过杂交核酸双链的解离成功实现了芯片的再生,有助于解决传统抗体固定方法中芯片不可再生的问题.     

在线质谱仪检测植物排放的挥发性有机物

利用在线检测质谱仪(SPIMS-1000)分别对高温烘烤、长时间密封保存、机械损伤等处理过的松科松属马尾松(Pinus Massoniana L.)样品排放的挥发性有机物(VOCs)与新鲜样品进行对比检测。SPIMS-1000在线检测质谱仪能够检测出植物排放的异戊二烯(m/z 68)和单萜(m/z 136),及其它一些特异性组分,如(Z)-3-己烯醛(m/z 98)等。利用在线检测质谱仪实现敞开环境中原位植物排放气体的检测。实验表明,在线检测质谱仪被广泛应用于环境中VOCs的实时、在线、定性快速检测。     

基于负温度系数热敏电阻的催化燃烧型一氧化碳传感器

介绍一种能检测0.0232 g/m3CO的新型催化燃烧型传感器。这种传感器使用电阻温度系数高的负温度系数热敏电阻(NTCT)代替传统的铂丝线圈。传统的催化燃烧型传感器只能检测百分浓度的可燃气体,而基于NTCT的催化燃烧型CO传感器可以检测到0.0232 g/m3CO气体。当桥电压为9 V时,传感器输出信号与CO浓度在0.0232~0.58 g/m3之间具有良好的线性关系。传感器对0.58 g/m3CO的响应和恢复时间分别为50和120 s。考察了传感器的选择性和长期稳定性,结果表明:传感器对甲烷等气体具有较好的选择性,老化处理后的传感器,连续观察100 d,对CO的响应强度未发生明显下降。     

宽离子能量检测范围垂直引入反射式飞行时间质谱仪的研制

本实验室研制了国内首台宽离子能量检测范围飞行时间质谱仪。仪器采用紧凑式电子轰击源设计,配合离子透镜系统有效的调制离子流,飞行时间质量分析器采用了离子垂直引入式,双场加速和双场反射以及大尺寸MCP检测装置设计。仪器单离子信号半峰宽约2 ns,仪器分辨率优于1600FWHM,检测实际样品质量范围为1~127 amu(仪器理论质量检测上限优于800 amu),可检测离子能量范围优于2个数量级(3~140 eV)。若该TOF质量分析器与短瞬高压脉冲放电离子源耦合联用,可广泛应用于高能离子束的快速检测,如真空阴极放电对制备薄膜、离子注入材料的表征,导电材料的离子电荷态分布以及离子扩散速度的测定等。     

Nonisothermal crystallization and morphology of poly(butylene succinate)/layered double hydroxide nanocomposites

Biodegradable poly(butylene succinate) (PBS) and layered double hydroxide (LDH) nanocomposites were prepared via melt blending in a twin-screw extruder. The morphology and dispersion of LDH nanoparticles within PBS matrix were characterized by transmission electron microscopy (TEM), which showed that LDH nanoparticles were found to be well distributed at the nanometer level. The nonisothermal crystallization behavior of nanocomposites was extensively studied using differential scanning calorimetry (DSC) technique at various cooling rates. The crystallization rate of PBS was accelerated by the addition of LDH due to its heterogeneous nucleation effect; however, the crystallization mechanism and crystal structure of PBS remained almost unchanged. In kinetics analysis of nonisothermal crystallization, the Ozawa approach failed to describe the crystallization behavior of PBS/LDH nanocomposites, whereas both the modified Avrami model and the Mo method well represented the crystallization behavior of nanocomposites. The effective activation energy was estimated as a function of the relative degree of crystallinity using the isoconversional analysis. The subsequent melting behavior of PBS and PBS/LDH nanocomposites was observed to be dependent on the cooling rate. The POM showed that the small and less perfect crystals were formed in nanocomposites.